[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DND and BLF working together
Author Message
c99hris Offline
Junior Member
**

Posts: 39
Joined: Aug 2015
Reputation: 0
Post: #1
DND and BLF working together
Is there a way to get the BLF key to show that another extension has their DND button activated?

I have tried these on the T46S using 66.82.0.30 firmware where these settings will not stick in the phone when I upload the config from my provisioning server. I did check the file and they are present. I download the config of the phone and they are not there nor does the DND status notification to my server work due to the settings not sticking

These wont stick:
features.dnd.allow=”1”
features.feature_key_sync.enable=”1”
features.dnd.feature_key_sync.enable=”1”
features.dnd_mode=”0”
features.dnd_refuse_code=”480”
01-26-2018 05:01 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Aishion_Yealink Offline
Administrator
*******

Posts: 116
Joined: Mar 2017
Reputation: 1
Post: #2
RE: DND and BLF working together
(01-26-2018 05:01 PM)c99hris Wrote:  Is there a way to get the BLF key to show that another extension has their DND button activated?

I have tried these on the T46S using 66.82.0.30 firmware where these settings will not stick in the phone when I upload the config from my provisioning server. I did check the file and they are present. I download the config of the phone and they are not there nor does the DND status notification to my server work due to the settings not sticking

These wont stick:
features.dnd.allow=”1”
features.feature_key_sync.enable=”1”
features.dnd.feature_key_sync.enable=”1”
features.dnd_mode=”0”
features.dnd_refuse_code=”480”

Dear customer,

This is Aishion from Yealink technical team, nice to know you. My pleasure to work for you! 

Sorry to tell you that Yealink Phone is only for monitor idle status, ringing status, or in a call status, can’t monitor the DND status at present. 

To solve this issue, I believe that the best way is connect your sip server for help to make sure that when phone is set to DND, then the Notify  message that server send to phone side should contain the correct state. State are all showing below:
 
terminated    means  idle
confirmed    means  busy 
early     means   ringing 
proceeding  means ringing 

 
So the best way is the notify send from server to phone containing the state of "confirmed", then DND feature can be seen as a busy state of the phone.

Can this solution meet your requirement? If not, would you please share us is there any project for this features? How many phones in the project?

Any question, please feel free to contact us.

Best Regards
Aishion
01-29-2018 03:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
c99hris Offline
Junior Member
**

Posts: 39
Joined: Aug 2015
Reputation: 0
Post: #3
RE: DND and BLF working together
Please tell me why these do not work in the T4X phones, they show in the admin user guide

features.dnd.allow=”1”
features.feature_key_sync.enable=”1”
features.dnd.feature_key_sync.enable=”1”
features.dnd_mode=”0”
features.dnd_refuse_code=”480”
01-29-2018 02:44 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,371
Joined: Jan 2014
Reputation: 40
Post: #4
RE: DND and BLF working together
(01-29-2018 02:44 PM)c99hris Wrote:  Please tell me why these do not work in the T4X phones, they show in the admin user guide

features.dnd.allow=”1”
features.feature_key_sync.enable=”1”
features.dnd.feature_key_sync.enable=”1”
features.dnd_mode=”0”
features.dnd_refuse_code=”480”

Hi,

Please take a note you are using "value" instead of value in the parameter string.
Maybe thats why it is not working?
features.dnd.allow=1
features.feature_key_sync.enable=1
features.dnd.feature_key_sync.enable=1
features.dnd_mode=0
features.dnd_refuse_code=480

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
01-29-2018 03:04 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
c99hris Offline
Junior Member
**

Posts: 39
Joined: Aug 2015
Reputation: 0
Post: #5
RE: DND and BLF working together
My provisioning server strips out the "value"
I have the correct value however the phone will not store the feature value that is applied ?
Please check it your self on a T46S running the latest production firmware
01-29-2018 03:17 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Aishion_Yealink Offline
Administrator
*******

Posts: 116
Joined: Mar 2017
Reputation: 1
Post: #6
RE: DND and BLF working together
(01-29-2018 03:17 PM)c99hris Wrote:  My provisioning server strips out the "value"
I have the correct value however the phone will not store the feature value that is applied ?
Please check it your self on a T46S running the latest production firmware
Dear custoemr,

Sorry for my misunderstanding, I just test on my side with below auto provision parameter:

features.dnd.allow=1
features.feature_key_sync.enable=1
#the default value is 0
features.dnd.feature_key_sync.enable=1
#the default value is 1
features.dnd_mode=0
#the default value is 0, Features->Forward&DND->DND->Mode
features.dnd_refuse_code=480
#the default value is 480, Features->General Information->Return Code

And it can save in the phone normally, may I know did you export the cfg file to check, if so, some of the configuration will not save in this file and usually we will export cfg.bin file for back up requirement.

May I know does this feature not working well on your side?

Any question, please feel free to contact us.

Best Regards

Aishion
01-30-2018 11:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
c99hris Offline
Junior Member
**

Posts: 39
Joined: Aug 2015
Reputation: 0
Post: #7
RE: DND and BLF working together
We use
Settings>>Configuration>>Export CFG Configuration File>>All Settings

We have to have a way to export and verify the settings are in the phone, how can we do this?
01-30-2018 02:33 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Aishion_Yealink Offline
Administrator
*******

Posts: 116
Joined: Mar 2017
Reputation: 1
Post: #8
RE: DND and BLF working together
(01-30-2018 02:33 PM)c99hris Wrote:  We use


We have to have a way to export and verify the settings are in the phone, how can we do this?

Dear customer,

You can verify the settings using cfg file which is export from "Settings>>Configuration>>Export CFG Configuration File>>All Settings", but you need to change the parameter you set, because some of your configure parameters are factory setting, so you can't see factory parameter in that file.

Factory parameter:
features.dnd.allow=0
features.feature_key_sync.enable=0
#the default value is 0
features.dnd.feature_key_sync.enable=1
#the default value is 1
features.dnd_mode=0
#the default value is 0, Features->Forward&DND->DND->Mode
features.dnd_refuse_code=480
#the default value is 480, Features->General Information->Return Code

After you change factory parameter as below you can see your settings:
features.dnd.allow=0
features.feature_key_sync.enable=1
#the default value is 0
features.dnd.feature_key_sync.enable=0
#the default value is 1
features.dnd_mode=1
#the default value is 0, Features->Forward&DND->DND->Mode
features.dnd_refuse_code=404
#the default value is 480, Features->General Information->Return Code

And please note that
"features.feature_key_sync.enable" will show as "bw.feature_key_sync =" since it's the old version parameter.

Any question, please feel free to contact us.

Best Regards

Aishion
01-31-2018 05:45 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
c99hris Offline
Junior Member
**

Posts: 39
Joined: Aug 2015
Reputation: 0
Post: #9
RE: DND and BLF working together
Per the administrator guide
features.dnd.allow if set to 0 is Disabled, DND cannot be activated
so should this not be set to 1 enabled?

These settings are in my config that I send to the phone however are missing from the cfg when I retrieve it from the phone?
features.dnd_mode
feature.dnd_refuse_code
features.dnd.allow
01-31-2018 03:12 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Aishion_Yealink Offline
Administrator
*******

Posts: 116
Joined: Mar 2017
Reputation: 1
Post: #10
RE: DND and BLF working together
(01-31-2018 03:12 PM)c99hris Wrote:  Per the administrator guide
features.dnd.allow if set to 0 is Disabled, DND cannot be activated
so should this not be set to 1 enabled?

These settings are in my config that I send to the phone however are missing from the cfg when I retrieve it from the phone?
features.dnd_mode
feature.dnd_refuse_code
features.dnd.allow
Dear customer,

Please kindly see my answers as below:

Per the administrator guide
features.dnd.allow if set to 0 is Disabled, DND cannot be activated
so should this not be set to 1 enabled?

[Aishion]:

Sorry that I miss this parameter, for this parameter, yes you can kindly set to 0 or 1, but I need to explain to you that when you set to 1(factory setting), you can't retrieve this in the cfg file, it's design by this.

   

These settings are in my config that I send to the phone however are missing from the cfg when I retrieve it from the phone?
features.dnd_mode
feature.dnd_refuse_code
features.dnd.allow

[Aishion]:

1/ For "features.dnd_mode":

If you set this parameter to 0, you can't retrieve this in the cfg file, because you can't retrieve factory settings in the cfg file, it's design by this, but you can kindly check in the web UI, please go:
Features->Forward&DND->DND->Mode

2/ For "features.dnd_refuse_code"

If you set this parameter to 480, you can't retrieve this in the cfg file, because you can't retrieve factory settings in the cfg file, it's design by this, but you can kindly check in the web UI, please go:
Features->General Information->Return Code When DND

3/ For "features.dnd.allow"

If you set this parameter to 480, you can't retrieve this in the cfg file, because you can't retrieve factory settings in the cfg file, it's design by this.

To sum up, you can only retrieve parameter in cfg file if you changing it different from factory setting, because it's design by this.


Any question, please feel free to contact us.

Best Regards

Aishion
(This post was last modified: 02-01-2018 07:09 AM by Aishion_Yealink.)
02-01-2018 07:07 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48 - DTMF not working when DSS keys are selected Freek Mooij 4 8,987 11-07-2022 12:53 AM
Last Post: rromano
  T43U LDAP Settings Not Working nolto 1 3,257 01-14-2022 07:03 PM
Last Post: nolto
  NAP over Yealink T46 - not working Bernhard77 0 1,977 11-16-2021 09:15 PM
Last Post: Bernhard77
  Phone features not working KenleyHickman 10 13,694 09-14-2020 07:52 PM
Last Post: KenleyHickman
  t48G SFB not working at all now j.pakula 0 2,696 06-22-2020 02:36 PM
Last Post: j.pakula
  Tim&Date Not working Brian1949 4 7,242 03-15-2020 09:11 AM
Last Post: complex1
  T46S voicemail key not working (off hook) Advance2000 6 12,141 08-31-2019 07:29 AM
Last Post: rithvik
  DialingEmpty tag not working in softkey template in V84 ipcsolutions 1 4,010 08-29-2019 11:09 PM
Last Post: ipcsolutions
Exclamation IPv6 not working as of 35.83.0.50 Louis6321 1 4,924 07-09-2019 08:41 AM
Last Post: Kevin_Yealink
  BLF not working since firmware 66.82.x.x Jeremy17 1 13,051 05-30-2019 07:52 PM
Last Post: Autus Technology_Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication