[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G - BLF no work, Lamps wrong status
Author Message
ghostoll Offline
Junior Member
**

Posts: 19
Joined: May 2015
Reputation: 0
Post: #1
T46G - BLF no work, Lamps wrong status
Hello,

We've been having a problem with all 13 T46G Yealink devices for a long time, when the internet download through the computer goes to maximum. Even after that, the device also shows malfunctions.
Due to the Internet load, the Yealink apparently loses the Internet connection at short notice and can not restore it to 100%. It shows malfunctions, such as the BLF buttons no longer work. The lamps show wrong status ....
Only a restart helps the device. Until the Internet shows full capacity again.

Firmware: 28.81.0.110

The phones hang on a switch. The switch directly to the "AVM Fritzbox 6490 Cable (kdg)".
Internet telephony is set up as a real-time application.

Internet test
Download 104159 kbps
Upload 11922 kbps
Ping 20 ms


Would anyone have an idea what it could be?

Regards


Attached File(s)
.pdf  Yealink Pings.pdf (Size: 14.74 KB / Downloads: 3)
01-22-2018 10:22 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #2
RE: T46G - BLF no work, Lamps wrong status
Dear Customer,

You mean even the Internet shows full capacity again, the BLF statue still have problem?
Please upgrade the firmware to the latest version firstly, as it solve so many BLF bugs:
http://download.support.yealink.com/down...2.0.30.rom

After that, if still have problem, please provide the level 6 syslog, config.bin and pcap trace when you reproduce the issue for us to debug.
Please note to export the syslog to the server side, use the wireshark to capture the pcap trace.
Refer to the three FAQ to collect the three files:
http://support.yealink.com/faq/faqInfo?id=707
http://support.yealink.com/faq/faqInfo?id=712
http://support.yealink.com/faq/faqInfo?id=709

Best Regards,
Lucia
01-23-2018 02:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ghostoll Offline
Junior Member
**

Posts: 19
Joined: May 2015
Reputation: 0
Post: #3
RE: T46G - BLF no work, Lamps wrong status
Hello Lucia,
Thanks for the answer.

I updated the firmware on my device today. I watch the rest of the story. If the error comes back, I'll let you know.
Whether I can do that with the error logs, I do not know. My english is limited.
All I can say is that we have had to restart individual devices over and over again for many months because the BLFs are not working properly.

I'll contact you!

Regards
02-02-2018 09:32 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ghostoll Offline
Junior Member
**

Posts: 19
Joined: May 2015
Reputation: 0
Post: #4
RE: T46G - BLF no work, Lamps wrong status
Hello,

I did the update on all devices today. But the problem persists.
The status of individual employees is not shown on the display (LED).
The mistake comes quite sporadically. I can not reproduce it immediately.
But I have exported diagnostic files from the affected device. Where can I upload the file?

http://support.yealink.com/faq/faqInfo?id=712
http://support.yealink.com/faq/faqInfo?id=709
I am too complicated. I do not understand.

Regards
02-08-2018 07:50 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #5
RE: T46G - BLF no work, Lamps wrong status
HI Customer,

You can send the file to Lucia@yealink.com.
Holiday note: Yealink office will be closed from Feb.11th to Feb.22nd to celebrate Chinese New Year.

Best Regards,
Lucia
02-08-2018 08:02 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T46G-Why wont my BLF Key flash Brian1949 1 8,532 01-17-2020 02:25 AM
Last Post: Brian1949
  SFB on T46G Romeo 1 9,187 04-25-2019 08:49 PM
Last Post: jvoros
  Yealink T46S & T46G one way audio intermittent issue Byron13 0 8,425 01-23-2019 04:35 AM
Last Post: Byron13
  Problem after update firmware t46g Paulo Batista 1 10,667 09-21-2018 09:56 AM
Last Post: complex1
  T46G - Line Key TY 3 10,882 01-26-2018 01:16 AM
Last Post: Evan_Yealink
  T46G DTMF janez 1 7,695 11-30-2017 07:02 AM
Last Post: Lucia_Yealink
  T46G Buyback anywhere? Claire 0 5,561 11-09-2017 06:42 PM
Last Post: Claire
  Trying to get uaCSTA to work Danny-one 4 14,324 09-04-2017 08:21 AM
Last Post: Andreas32423
  T46G Skype For Business not resolving skype contact names & no missed call report J.P.G 0 14,600 05-23-2017 11:43 AM
Last Post: J.P.G
  T46G Skype For Business not resolving skype contact names & no missed call report J.P.G 0 7,900 05-23-2017 11:41 AM
Last Post: J.P.G

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication