[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G/S Multicast on PC Port Issue
Author Message
MiKeDaDoC Offline
Junior Member
**

Posts: 8
Joined: Apr 2015
Reputation: 0
Post: #1
T46G/S Multicast on PC Port Issue
Hi there,

we got a few hundred T46G and T46S in use. We connect them directly to some Cisco 2960x switches, we are using LLDP for Voice VLAN provisioning, use 802.1x as well and connect the computers (one behind one phone only) at the pc port using a diffrent VLAN. This works like a charm.

Now we got a video surveilance Software by Panasonic which will send Multicast stream from the cameras to a few computers behind some T46G/S phones

For the first 5 seconds the Multicast stream works fine, but then it stops. Connecting the Computer direct on the Cisco Switch is working, so my multicast Routing is fine.

My question at this Point would be:
Is there anything like a storm control for multicast or anything that would stop the multicast packets from getting to the PC port after a while on the T46G/S phones? And if so, can it be turned off?

EDIT:
when a computer is directly connected to the switch, the mutlicast group is queried by IGMP v2.
When behind a T46G/S it only manages to query the multicast group by using IGMP v1. Guess that is part of the problem.
Seems like the Yealink phone won't handle/pass IGMP v2 requests right. Can anyone confirm this behaviour? Anyone using Mutlicast traffic on the PC Port off a T46G/S and the underlying service, such as a video recording/camera system is in need of IGMP v2 Support?

Thanks
(This post was last modified: 12-30-2017 07:07 PM by MiKeDaDoC.)
12-30-2017 12:03 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Elaine_Yealink Offline
Super Moderator
******

Posts: 152
Joined: Aug 2014
Reputation: 4
Post: #2
RE: T46G/S Multicast on PC Port Issue
Hi there,

The latest version fixes this issue by adding parameters to steam control. Please upgrade to this version and test:
http://sfyms.yealink.com/?ShareToken=02C...4943DA6FC4

This parameter configures the protecting mode for Ethernet port. Value ranges from 0-4;
network.storm_filtering_mode = 2

These parameters configures the speed of Lan/wan/mii port. Value ranges from 1-3 reflecting to 10M/100M/1000M.
network.storm_filtering.lan_speed = 2
network.storm_filtering.wan_speed = 2
network.storm_filtering.mii_speed = 2

These parameters configures protecting level Ethernet port. Value ranges from 1-5. Level goes stronger as value raise up.
network.storm_filtering.lan_bsp_level = 4
network.storm_filtering.wan_bsp_level = 4
network.storm_filtering.mii_bsp_level = 4

The values above are default values on the latest firmware. If upgrading firmware does not fix your issue, please try reduce the parameters.

Regards
Elaine
01-05-2018 06:44 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
MiKeDaDoC Offline
Junior Member
**

Posts: 8
Joined: Apr 2015
Reputation: 0
Post: #3
RE: T46G/S Multicast on PC Port Issue
Hi,

wanted to give Feedback...new Firmware and changed network.storm Settings are working for the multicast problem I had. Big Grin

For anyone interessted I used the following Settings:

network.storm_filtering_mode = 1

network.storm_filtering.lan_speed = 3
network.storm_filtering.wan_speed = 3
network.storm_filtering.mii_speed = 3

network.storm_filtering.lan_bsp_level = 1
network.storm_filtering.wan_bsp_level = 1
network.storm_filtering.mii_bsp_level = 1

I will check the next weeks if this is working for T56A, too. There is a new .40 FW released Wink
02-18-2018 05:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kw160008 Offline
Junior Member
**

Posts: 2
Joined: Apr 2021
Reputation: 0
Post: #4
RE: T46G/S Multicast on PC Port Issue
I am having this same problem. I am currently on firmware version: 66.86.25.2 but i do not see these setting options. Since this is an old thread has the options been changed/moved?

(02-18-2018 05:45 PM)MiKeDaDoC Wrote:  Hi,

wanted to give Feedback...new Firmware and changed network.storm Settings are working for the multicast problem I had. Big Grin

For anyone interessted I used the following Settings:

network.storm_filtering_mode = 1

network.storm_filtering.lan_speed = 3
network.storm_filtering.wan_speed = 3
network.storm_filtering.mii_speed = 3

network.storm_filtering.lan_bsp_level = 1
network.storm_filtering.wan_bsp_level = 1
network.storm_filtering.mii_bsp_level = 1

I will check the next weeks if this is working for T56A, too. There is a new .40 FW released Wink
01-01-2023 06:11 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
MiKeDaDoC Offline
Junior Member
**

Posts: 8
Joined: Apr 2015
Reputation: 0
Post: #5
RE: T46G/S Multicast on PC Port Issue
Hi,

those settings are not present in the config files at default, at least they were not present in our 3CX templates.

Just add them to your config file and comment the section as Network Storm Control or similar, re-provision your phone and check if it works.

I added them in the "Network" section as last entries, shortly before "CDP" section, as seen in the Screenshot.


Attached File(s) Thumbnail(s)
   
01-01-2023 06:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kw160008 Offline
Junior Member
**

Posts: 2
Joined: Apr 2021
Reputation: 0
Post: #6
RE: T46G/S Multicast on PC Port Issue
Thanks! I will update the config file. I was trying to find it in the phone web admin GUI.

(01-01-2023 06:00 PM)MiKeDaDoC Wrote:  Hi,

those settings are not present in the config files at default, at least they were not present in our 3CX templates.

Just add them to your config file and comment the section as Network Storm Control or similar, re-provision your phone and check if it works.

I added them in the "Network" section as last entries, shortly before "CDP" section, as seen in the Screenshot.
01-02-2023 01:30 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T43 issue with Teams Sip Gateway mecano427 1 367 03-01-2024 08:28 PM
Last Post: complex1
  Need bin and rfs files SIP-T46G RobbyK 1 732 01-11-2024 11:26 PM
Last Post: complex1
  SIP-T46G Need firmware update instructions RobbyK 2 967 01-11-2024 10:52 PM
Last Post: RobbyK
  T46G recovery files evoip 1 1,368 10-10-2023 12:46 AM
Last Post: Yisroel_MongoTEL
  T42U Issue on Teams / Direct Routing TheGarrison 1 1,469 08-11-2023 11:20 PM
Last Post: TheGarrison
  T46S issue with Showing Additional DSS Pages ama 1 1,332 06-10-2023 12:44 AM
Last Post: Yisroel_MongoTEL
  T46G Multiple EXT Port amandah 2 1,977 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Photo T46G LED blinks when screen is off W 4 8,133 03-29-2023 05:36 AM
Last Post: matthewchubb
  T46G call completed elsewhere zimbocz 3 10,016 10-28-2022 03:28 AM
Last Post: tredd1982
  T46G SSL 2 & 3 Vulnerability russavd 0 1,429 09-24-2022 05:07 AM
Last Post: russavd

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication