Log in

Bobcat19 · 07-21-2015 11:26 AM

So we have a customer who is having infrequent issues when calling numbers that require you to press keys etc (IVR). Quite often they'll call, press the keys, and nothing will happen.

After doing some research I found that it might be a good idea to change the DTMF setting to "inband".

Is this a good idea, and is there any chance it'll affect something else in the process?

***James_Yealink*** · 07-21-2015 05:14 PM

Hi Bobcat,

The DTMF method depends on PBX server.
PBX server may not be well compatible to all three type of DTMF method. So just choose one which can work well with server.

It won't affect other fucntion.

Regards,
James

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	FreePBX chan_pjsip DTMF digits not displaying on screen	karl_edgeconnect	1	587	02-13-2024 09:52 PM Last Post: karl_edgeconnect
	Export/extract ring tones	mdkl	0	770	11-09-2023 07:31 PM Last Post: mdkl
	T28P & T38G: Speed Dial delay or pause between DTMF	yoda72	68	317,597	08-18-2019 09:06 PM Last Post: HotlineExperts
	blf + dtmf key	hercross	1	7,343	06-01-2018 02:22 AM Last Post: Kevin_Yealink
	Yealink RFC4733 DTMF support	avayax	0	5,361	03-30-2018 10:35 PM Last Post: avayax
	Configure DTMF duration time on T23G	avayablix	1	8,026	11-01-2016 02:52 AM Last Post: Lucia_Yealink
	DTMF Tones & 3cx	myfastback.com	3	16,229	11-24-2015 04:15 AM Last Post: James_Yealink
	Ring Tones	Charliestott	3	10,276	06-02-2015 06:49 AM Last Post: John_K
	Do not detect inband DTMF	aron	0	5,815	03-21-2015 05:38 AM Last Post: aron
	DTMF timeout delay	bazzacad	2	11,098	09-06-2014 12:23 AM Last Post: bazzacad

Threaded Mode \| Linear Mode DTMF Tones to "Inband"?
Author	Message