[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yealink 28.82.0.20
Author Message
Jarad Offline
Junior Member
**

Posts: 9
Joined: Nov 2017
Reputation: 0
Post: #1
Yealink 28.82.0.20
I'm using Yealink T46G phones on a 3CX server and I am testing the new firmware before I push out the upgrade.

I have put this new firmware out on a few test phones and it's causing issues with placing and picking up shared parking slots. I've been testing to see if I can find a resolution, but so far nothing.

I do notice though in the web console of the desk phone 'Features > Pickup & Park > Call Park', that the 'Call Park Mode' setting has changed. In the newer firmware, only 'FAC' is available to use. In the older firmware that still works, located in 'Features > Call Pickup > Call Park' that the 'Call Park Mode' is set by default to 'XSI'.

The phone I'm currently testing on is a T46G with a hardware version of 28.2.0.128.0.0.0 and running firmware 28.82.0.20.

After several factory resets and firmware reinstallation, the problem persists. I was referred to this forum from the 3CX support forum. Staff of that forum informed me they were in contact with Yealink who recommended it.

I also have the configuration files available to send for more information if needed.
(This post was last modified: 11-27-2017 03:35 PM by Jarad.)
11-27-2017 03:33 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #2
RE: Yealink 28.82.0.20
(11-27-2017 03:33 PM)Jarad Wrote:  I'm using Yealink T46G phones on a 3CX server and I am testing the new firmware before I push out the upgrade.

I have put this new firmware out on a few test phones and it's causing issues with placing and picking up shared parking slots. I've been testing to see if I can find a resolution, but so far nothing.

I do notice though in the web console of the desk phone 'Features > Pickup & Park > Call Park', that the 'Call Park Mode' setting has changed. In the newer firmware, only 'FAC' is available to use. In the older firmware that still works, located in 'Features > Call Pickup > Call Park' that the 'Call Park Mode' is set by default to 'XSI'.

The phone I'm currently testing on is a T46G with a hardware version of 28.2.0.128.0.0.0 and running firmware 28.82.0.20.

After several factory resets and firmware reinstallation, the problem persists. I was referred to this forum from the 3CX support forum. Staff of that forum informed me they were in contact with Yealink who recommended it.

I also have the configuration files available to send for more information if needed.

Hi,

Please enable the BroadSoft feature and try again.
It can be enabled by follow auto provision parameter:

bw.enable = 1

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
11-27-2017 04:30 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jarad Offline
Junior Member
**

Posts: 9
Joined: Nov 2017
Reputation: 0
Post: #3
RE: Yealink 28.82.0.20
(11-27-2017 04:30 PM)complex1 Wrote:  
(11-27-2017 03:33 PM)Jarad Wrote:  I'm using Yealink T46G phones on a 3CX server and I am testing the new firmware before I push out the upgrade.

I have put this new firmware out on a few test phones and it's causing issues with placing and picking up shared parking slots. I've been testing to see if I can find a resolution, but so far nothing.

I do notice though in the web console of the desk phone 'Features > Pickup & Park > Call Park', that the 'Call Park Mode' setting has changed. In the newer firmware, only 'FAC' is available to use. In the older firmware that still works, located in 'Features > Call Pickup > Call Park' that the 'Call Park Mode' is set by default to 'XSI'.

The phone I'm currently testing on is a T46G with a hardware version of 28.2.0.128.0.0.0 and running firmware 28.82.0.20.

After several factory resets and firmware reinstallation, the problem persists. I was referred to this forum from the 3CX support forum. Staff of that forum informed me they were in contact with Yealink who recommended it.

I also have the configuration files available to send for more information if needed.

Hi,

Please enable the BroadSoft feature and try again.
It can be enabled by follow auto provision parameter:

bw.enable = 1

Hope this will help.

This has already been enabled.
11-27-2017 04:39 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jarad Offline
Junior Member
**

Posts: 9
Joined: Nov 2017
Reputation: 0
Post: #4
RE: Yealink 28.82.0.20
(11-27-2017 04:30 PM)complex1 Wrote:  
(11-27-2017 03:33 PM)Jarad Wrote:  I'm using Yealink T46G phones on a 3CX server and I am testing the new firmware before I push out the upgrade.

I have put this new firmware out on a few test phones and it's causing issues with placing and picking up shared parking slots. I've been testing to see if I can find a resolution, but so far nothing.

I do notice though in the web console of the desk phone 'Features > Pickup & Park > Call Park', that the 'Call Park Mode' setting has changed. In the newer firmware, only 'FAC' is available to use. In the older firmware that still works, located in 'Features > Call Pickup > Call Park' that the 'Call Park Mode' is set by default to 'XSI'.

The phone I'm currently testing on is a T46G with a hardware version of 28.2.0.128.0.0.0 and running firmware 28.82.0.20.

After several factory resets and firmware reinstallation, the problem persists. I was referred to this forum from the 3CX support forum. Staff of that forum informed me they were in contact with Yealink who recommended it.

I also have the configuration files available to send for more information if needed.

Hi,

Please enable the BroadSoft feature and try again.
It can be enabled by follow auto provision parameter:

bw.enable = 1

Hope this will help.

This is already set.
11-27-2017 04:39 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jarad Offline
Junior Member
**

Posts: 9
Joined: Nov 2017
Reputation: 0
Post: #5
RE: Yealink 28.82.0.20
"bw.enable = 1" has already been set.
11-27-2017 04:41 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jarad Offline
Junior Member
**

Posts: 9
Joined: Nov 2017
Reputation: 0
Post: #6
RE: Yealink 28.82.0.20
Any update on this? I can offer any information you need regarding this issue.
11-28-2017 09:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
engine411 Offline
Member
***

Posts: 115
Joined: May 2013
Reputation: 1
Post: #7
RE: Yealink 28.82.0.20
Also waiting for 3CX and/or Yealink to give a resolution here. Same issue as the OP. I had to manually downgrade all my phones to 28.81.0.110 so that shared park works.

In the phone when it's upgraded to 28.82.0.20, first, I can't get shared park to work in the phone's web gui, and second, the tooltips at 'Features > Pickup & Park > Call Park' are useless. Often you can use the tooltips as a clue to find the proper configuration parameter to change in the template, but here, the tooltips are useless.
11-29-2017 11:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #8
RE: Yealink 28.82.0.20
Dear Customer,

Please enabled the XSI feature and try again:
It can be enabled by follow auto provision parameter:
bw.xsi.enable=1

Then you can see in the call park mode, the XSI will be available.

@Frank, Thank you for your help.Big Grin

BR
Lucia
11-30-2017 06:50 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jarad Offline
Junior Member
**

Posts: 9
Joined: Nov 2017
Reputation: 0
Post: #9
RE: Yealink 28.82.0.20
(11-30-2017 06:50 AM)Lucia_Yealink Wrote:  Dear Customer,

Please enabled the XSI feature and try again:
It can be enabled by follow auto provision parameter:
bw.xsi.enable=1

Then you can see in the call park mode, the XSI will be available.

@Frank, Thank you for your help.Big Grin

BR
Lucia

Ok. I have made this change and it has given me the option to use XSI again. However, I still cannot use shared parking. I think this is a step in the right direction but I need a little more help.
11-30-2017 04:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #10
RE: Yealink 28.82.0.20
HI Jarad,

OK, for the call park problem, can you describe the scenario more detail? I need to check the phone's action. Or maybe you can provide the video to record the issue, then the detail won't be lost.

Also, please provide the level 6 syslog, config.bin and pace trace for me to debug.
Refer to the FAQ to collect the three files:
http://support.yealink.com/faq/faqInfo?id=313
To make a comparision and locate the problem more quickly, please provide the three files when you do park in the older firmware(V81).

(You can send the files to Lucia@yealink.com, with the link of this post)

BR
Lucia
12-01-2017 12:44 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T46U - OpenVPN to MikroTik Router isaiahsiewert 0 435 01-19-2024 12:04 AM
Last Post: isaiahsiewert
  Connect Yealink T46U to FreePBX system via Synology Site to Site VPN TF2023 0 751 10-10-2023 11:48 PM
Last Post: TF2023
  Yealink SIP-T40P Firmware UnitedTech_Support 1 2,006 05-05-2023 08:07 PM
Last Post: complex1
Question Yealink SIP-T31, 46U, 48U do not display the number of the called subscr Fedor.astrakhan 1 1,774 04-26-2023 10:05 PM
Last Post: Yisroel_MongoTEL
  Yealink T41S firmware kosif 0 1,946 12-19-2022 08:52 AM
Last Post: kosif
  Yealink T46S Forwarding does not work!! Müller 0 1,349 10-16-2022 03:38 AM
Last Post: Müller
  Yealink T42G Phone stuck at Welcome LFC 12 30,274 08-08-2022 04:16 PM
Last Post: markvdheijden
  Yealink T48S won't factory reset djcartledge 3 5,108 07-16-2022 05:16 PM
Last Post: complex1
  Ringer Loud on Yealink T46S when using WH62 Dual Headset KellyL@AlternateAccess.com 0 2,126 07-07-2022 05:06 AM
Last Post: KellyL@AlternateAccess.com
  Yealink T48s Firmware update failed dangmoss 2 7,385 02-19-2022 03:09 AM
Last Post: dangmoss

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication