New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T27G change programmable key on incoming call
Author Message
EIP Offline
Junior Member
**

Posts: 2
Joined: Nov 2017
Reputation: 0
Post: #1
T27G change programmable key on incoming call
Hi, have a T27G proviisioned via a 3CX pbx. Have a request from a client that wishes to have one of the programmable keys to flash "pickup" on an incoming call whereby they can pickup the call.

I have managed to edit the provisioning template to add the label and functionality to one of the programmable keys when the handset is down but cannot fathom where to configure for an incoming call if its possible at all?

any thanks!

Nell
11-24-2017 09:57 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Evan_Yealink Offline
Administrator
*******

Posts: 123
Joined: Mar 2017
Reputation: 0
Post: #2
RE: T27G change programmable key on incoming call
Dear Nell,

For your question, I’ve attached the FAQ about BLF+pickup for your reference.
http://support.yealink.com/faq/faqInfo?id=176
This feature depends on support from a SIP server. For many SIP servers, directed call pickup requires a directed pickup code, which can be configured on a phone or a per-line basis.
   
   

Any question, freely to let me know.

Regards,
Evan You
11-28-2017 02:43 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
EIP Offline
Junior Member
**

Posts: 2
Joined: Nov 2017
Reputation: 0
Post: #3
RE: T27G change programmable key on incoming call
(11-28-2017 02:43 AM)Evan_Yealink Wrote:  Dear Nell,

For your question, I’ve attached the FAQ about BLF+pickup for your reference.
http://support.yealink.com/faq/faqInfo?id=176
This feature depends on support from a SIP server. For many SIP servers, directed call pickup requires a directed pickup code, which can be configured on a phone or a per-line basis.



Any question, freely to let me know.

Regards,
Evan You

Hey Evan, thanks for the reply. Yep Ive used the pickup code and works well but what I need to know is whether I can assign the code/and change the DSS key label when the phone has an incoming call. For example, the default would be say DSS/Line Key1 label reads "DND". When the phone receives an incoming call DSS/Line Key1 label changes to "Pickup" and issues pickup code.

Thx

Nell
11-28-2017 06:11 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Evan_Yealink Offline
Administrator
*******

Posts: 123
Joined: Mar 2017
Reputation: 0
Post: #4
RE: T27G change programmable key on incoming call
Dear,

From your description, the DSS/Line Key1 label can't be changed, this is by design.

But the solution of Visual Alert and Audio Alert for BLF Pickup may help. It enables to display a visual alert or play an audio alert on the phone when the monitored user receives an incoming call.
   

Visual and audio alert for BLF pickup allow the supervisor’s phone to play a specific ring tone and display a visual prompt (for example, “6001<-6002”, 6001 is the monitored extension which receives an incoming call from 6002) when the monitored user receives an incoming call. You can configure the display method of the call party information.
In addition to the BLF DSS key, visual alert for BLF pickup feature enables the supervisor to pick up the monitored user’s incoming call by pressing the Pick Up soft key. You may need to configure the directed call pickup code in advance.

Please correct me if anything misunderstood.

Regards,
Evan You
11-28-2017 07:30 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Change standard outgoing line on T46G oestersund 1 773 12-15-2018 09:58 PM
Last Post: support2
  USB call recording David D 5 3,264 05-15-2018 07:00 PM
Last Post: YOVU Cloud
  T27G no longer option to transfer call during ringing state DmitryTsyganov 1 1,237 04-16-2018 11:16 AM
Last Post: Travis_Yealink
  Call Park customization James Martin 2 1,473 04-02-2018 06:04 PM
Last Post: James Martin
  Current time not displayed when a call is missed John62 0 957 02-16-2018 05:07 PM
Last Post: John62
  Call Parking - Yealink Phone - Asterisk 11 vs 13 Velocita Technology 1 1,669 12-26-2017 06:06 AM
Last Post: Lucia_Yealink
  Call Waiting Ring Option moshebt 2 1,707 12-15-2017 08:30 AM
Last Post: Elaine_Yealink
  Delayed Action URL call MaartenBode 2 2,648 12-01-2017 09:21 AM
Last Post: AdamNTX
  Call Park Mode transfer on T48G jasonblewis 2 2,581 11-09-2017 01:26 AM
Last Post: Aishion_Yealink
  Ringback on second call highlander 1 1,903 10-13-2017 05:44 AM
Last Post: Aishion_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication