[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
newbie prov question
Author Message
unicomtelecom Offline
asdffdsa
**

Posts: 1
Joined: Nov 2017
Reputation: 0
Post: #1
newbie prov question
hello to all and thanks for reading this.

i am able to manually import a .cfg file using the webinterface but when i try to use autoprovision, the file is download to the phone but the phone does not seem to process the file.

i have setup a ftp server on my laptop.
in the phone's webinterface, i set the auto provisioning server url and password.

i see from the ftp server logs, that the phone is downloading the 001565827d82.boot file as seen here

RETR 001565827d82.boot
150 Connection accepted
226 Transfer OK


no matter what i info i place into that 001565827d82.boot file, the phone will not use that info.

so using the phone's web interface i create the simplest config possible.
i export that config as a file on my laptop and cut and paste the info into 001565827d82.boot

here is the config file

#!version:1.0.0.1
##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##
##account.X.*:(T54S/T48G/T48S/T46G/T46S/T29G: X ranges from 1 to 16. T52S/T42G/T42S: X ranges from 1 to 12. T41P/T41S/T27P/T27G: X ranges from 1 to 6. T40P/T40G/T23P/T23G: X ranges from 1 to 3. T21(P) E2: X ranges from 1 to 2.)##
account.1.enable = 1
account.1.user_name = test
account.1.sip_server.1.address = dummy.com


also, when i manually import cfg file using the webinterface, that works.

so this is very strange, i can manually import the cfg file but i cannot use autoprovision to download the same .cfg file.

so even that simple config, my phone will not auto-provision it, i have spent four hours so far, no luck.

i am sure i am doing something simple/stupid.
please help me!
(This post was last modified: 11-24-2017 05:27 PM by unicomtelecom.)
11-23-2017 09:09 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
anonymous1711612242218
Unregistered

 
Post: #2
RE: newbie prov question
Dear Customer,
Can you please try to put the configurations in the .cfg file instead of a .boot file?
Put 001565827d82.cfg on your provision server and then try the auto provision again on the web user interface again.
If it is not working, please turn on the capturing and repeat the opreations, and then send me the diagnostic files.
http://support.yealink.com/faq/faqInfo?id=313
Kind Regards
Samuel Wang
11-28-2017 07:50 AM
     Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  V73 Provisioning Question lorn10 2 8,710 06-06-2015 01:20 AM
Last Post: lorn10
  Newbie ftp question whatissip 2 7,309 05-13-2015 06:11 AM
Last Post: whatissip
  Auto Provisioning - General Question CraigFox 1 7,734 09-10-2014 05:29 PM
Last Post: James_Yealink
  Auto Prov - Remote FSchulz 2 12,809 08-07-2013 10:16 PM
Last Post: FSchulz

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication