[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to disable the Dial-Upon-Lift feature
Author Message
Jeremy17 Offline
Junior Member
**

Posts: 11
Joined: Nov 2017
Reputation: 3
Post: #1
How to disable the Dial-Upon-Lift feature
Let's say I want to call 1-800-123-4567. Without lifting the handset, I start dialing "180". I then realize that the phone is really loud because it's playing the tones over the speakerphone, and potentially annoying my neighbors or a client sitting in my office. So I lift the handset to turn off speakerphone, and continue dialing. However, as soon as I lift the handset, the phone Sends "180" instead of letting me continue dialing the rest of the number.

How do I turn that feature off? I do not want the phone to Send the digits until I either press Send or wait for the dialing timeout. I do not want lifting the handset to instantly Send my partially dialed number.

Thanks.
11-14-2017 06:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Evan_Yealink Offline
Administrator
*******

Posts: 127
Joined: Mar 2017
Reputation: 0
Post: #2
RE: How to disable the Dial-Upon-Lift feature
Dear Jeremy,

Good day!

For your question, to disable the IP phone to play a key tone when a user presses any key on your phone keypad may help.

Key tone allows the IP phone to play a key tone when a user presses any key.

To configure a key tone via web user interface:
1. Click on Features->Audio.
2. Select the desired value from the pull-down list of Key Tone.
3. Select the desired value from the pull-down list of Send Tone.
   

Or Phone User Interface:
Menu->Basic->Sound->Key Tone

Any question, freely to let me know.

Regards,
Evan You
12-11-2017 01:33 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  V84 feature blf.enhanced brourk 4 1,234 10-04-2019 12:32 AM
Last Post: Oregon
  T28P & T38G: Speed Dial delay or pause between DTMF yoda72 70 176,671 08-18-2019 09:06 PM
Last Post: HotlineExperts
  CP960 with SFB protect Basic and Feature settings geislinger 2 936 08-12-2019 01:15 PM
Last Post: geislinger
  Disable line x while phone is set to DND IT-Risch_Support 3 1,244 08-07-2019 02:00 PM
Last Post: jolouis
  Click to dial from web browser h2g-vaka 4 2,516 03-15-2019 07:53 AM
Last Post: banderlog
  Which RFC describes as-feature-event event package ? oliv 3 2,416 01-16-2019 04:45 PM
Last Post: jolouis
  Dial from Windows Pox 0 1,008 11-06-2018 02:52 PM
Last Post: Pox
  Dial Now Rule Issue when Transfer IPBX 3 2,972 03-19-2018 04:26 PM
Last Post: IPBX
  Network Conference feature Sur 11 6,343 11-07-2017 07:25 AM
Last Post: Sur
  redial with dial plan Leandro Freire 4 3,984 10-28-2017 05:20 PM
Last Post: Leandro Freire

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication