New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
cannot get forwarding to work
Author Message
p2xt Offline
Junior Member
**

Posts: 11
Joined: Oct 2015
Reputation: 0
Post: #1
cannot get forwarding to work
Hi,

One of our T41P phones is not allowing us to forward. We have tried forwarding from both the phone and the GUI. I have also noticed that the features->forward&dnd is missing a few options like on/off code on all forwarding tabs. I have also noticed an extra tab called Applications which is not available on the other T41p phones.

I have tried upgrading/downgrading to the latest version (36.82.0.20 and 36.81.0.20)

Could you please help me sort this problem?

Thanks,
Andrei
11-06-2017 09:54 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 470
Joined: Aug 2016
Reputation: 4
Post: #2
RE: cannot get forwarding to work
Dear Andrei,

If i don't misunderstand you, you mean you want to use the BSFT version(Broadsoft XSI/Broadsoft XMPP and so on). In our V82 firmware, SIP and BSFT share the same version.But it is SIP version by default. If you want to use the BSFT version, you need to use the parameter below to do auto provision to enable the BSFT version:
bw.enable = 1

If you upgrade from the BSFT version(V81) to V82, then the on/off code for DND and Forward are disabled in the web interface. That is by design.
You can use below parameters to do auto provision to configure the code:
forward.no_answer.on_code=
forward.no_answer.off_code=
forward.busy.on_code=
forward.busy.off_code=
forward.always.on_code=
forward.always.off_code=

features.dnd.on_code=
features.dnd.off_code=


For the forward don't work issue, please change the configure and test below:
features.forward.feature_key_sync.enable=
0-Disabled
1-Enabled, a user changes the forward status on server, the server notifies the phone of
synchronizing the status. Conversely, if the user changes forward status on the phone, the IP phone notifies the server of synchronizing the status.
Note: It works only if the value of the parameter “features.feature_key_sync.enable” is set to 1 (Enabled).

Best Regards,
Lucia
11-07-2017 06:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
p2xt Offline
Junior Member
**

Posts: 11
Joined: Oct 2015
Reputation: 0
Post: #3
RE: cannot get forwarding to work
Hi Lucia,

Thank you for your reply.

I am trying to use the forward function of the phone either via the web interface or the phone menu and it does not work.

I think our provision server sent the wrong software version to the phone as it does not look as the other phones. Even after we upgrade/downgrate the options do not change and we are unable to use the forward function.

I have attached a picture for you to see how the gui looks.

Thanks,
Andrei

(11-07-2017 10:54 AM)p2xt Wrote:  Hi Lucia,

Thank you for your reply.

I am trying to use the forward function of the phone either via the web interface or the phone menu and it does not work.

I think our provision server sent the wrong software version to the phone as it does not look as the other phones. Even after we upgrade/downgrate the options do not change and we are unable to use the forward function.

I have attached a picture for you to see how the gui looks.

Thanks,
Andrei

Hi Lucia,

I have managed to get forwarding to work by using bw.enable = 0 and restarting the phone.

Thank you for your help.

Regards,
Andrei


Attached File(s) Thumbnail(s)
   
(This post was last modified: 11-07-2017 11:53 AM by p2xt.)
11-07-2017 10:54 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  BLF no work in Unify OpenScape Business marioruiz_2811 4 1,807 05-22-2019 02:52 PM
Last Post: turiatel
  VPN Offline allow phone to work Clair 1 1,936 08-04-2017 09:31 PM
Last Post: jolouis
  Configure call forwarding Seb 2 3,832 10-19-2016 12:16 AM
Last Post: yeabee
  Action URL does not work danield 1 2,996 10-01-2016 12:57 AM
Last Post: Kevin_Yealink
  Action URL does not work danield 0 1,665 09-13-2016 03:12 PM
Last Post: danield
  Daylight Saving Time endTime don't work as expected amvalente 4 4,739 04-18-2016 08:26 PM
Last Post: grupocodesi
  Call Forwarding bottomsup6 3 3,526 11-24-2015 12:01 AM
Last Post: Karl_Yealink
  Local DHCP doesnt work when OpenVPN is enabled davids@btni.co.uk 3 4,180 11-19-2015 10:22 AM
Last Post: LandonL
  Usernames and Passwords don't work tdhfox21 1 2,759 11-11-2015 06:30 AM
Last Post: rjdefusco
  Disable call forwarding feature. TruckingExp 3 4,867 08-14-2015 04:19 AM
Last Post: Karl_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication