Call Park Mode transfer on T48G

[jasonblewis]

Hi,

on the T42G phones I can set call park mode to Transfer via the webif. On the T48G I am not given Transfer as an option, only FAC or XSI. is there some way to get the transfer mode of parking calls on the T48G?

thanks in advance

[Fraukas2]

What is your firmware version on the T48G ?

[Aishion_Yealink]

(11-03-2017 05:29 AM)jasonblewis Wrote:  Hi,

on the T42G phones I can set call park mode to Transfer via the webif. On the T48G I am not given Transfer as an option, only FAC or XSI. is there some way to get the transfer mode of parking calls on the T48G?

thanks in advance

Hi,

I think you are running on Broadsoft firmware which the third number is 193, example 35.81.193.1, am I right?

Can I know are you using Broadsoft PBX? If not, you can kindly upgrade to neutral firmware, you can download the firmware in below link:

T48G: http://download.support.yealink.com/down...2.0.20.rom

Please refer to below FAQ to upgrade the firmware:

http://support.yealink.com/faq/faqInfo?id=9

Any question, please do not hesitate to get in touch with us.