[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Screensaver.type on T46S
Author Message
wim Offline
Junior Member
**

Posts: 4
Joined: Oct 2017
Reputation: 0
Post: #1
Screensaver.type on T46S
We are currently provisioning T46S but I cant figure out how to set screensaver.type to custom. We've uploaded our company's logo with screensaver.upload_url, everything else provisions just fine, except provision.type = 1 does not work. None of our T46S phones sets screensaver type to custom. T46G does it just fine. Ive added the line to both mac and common cfg files. Can anyone help how I could provision this 1 particular setting? I'm using firmware 66.81.188.4 on T46S and 28.81.188.4 on T46G
10-31-2017 02:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,544
Joined: Jan 2014
Reputation: 48
Post: #2
RE: Screensaver.type on T46S
(10-31-2017 02:54 PM)wim Wrote:  We are currently provisioning T46S but I cant figure out how to set screensaver.type to custom. We've uploaded our company's logo with screensaver.upload_url, everything else provisions just fine, except provision.type = 1 does not work. None of our T46S phones sets screensaver type to custom. T46G does it just fine. Ive added the line to both mac and common cfg files. Can anyone help how I could provision this 1 particular setting? I'm using firmware 66.81.188.4 on T46S and 28.81.188.4 on T46G

Hi,

I think you are using the wrong parameter (provision.type)
To switch the Screensaver Type to Custom mode, please use this parameter:

#If it is set to 1 (Custom), the LCD screen will display the custom screen saver images (you need to upload custom image files to the IP phone).
screensaver.type = 1

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
10-31-2017 04:06 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
wim Offline
Junior Member
**

Posts: 4
Joined: Oct 2017
Reputation: 0
Post: #3
RE: Screensaver.type on T46S
(10-31-2017 04:06 PM)complex1 Wrote:  
(10-31-2017 02:54 PM)wim Wrote:  We are currently provisioning T46S but I cant figure out how to set screensaver.type to custom. We've uploaded our company's logo with screensaver.upload_url, everything else provisions just fine, except provision.type = 1 does not work. None of our T46S phones sets screensaver type to custom. T46G does it just fine. Ive added the line to both mac and common cfg files. Can anyone help how I could provision this 1 particular setting? I'm using firmware 66.81.188.4 on T46S and 28.81.188.4 on T46G

Hi,

I think you are using the wrong parameter (provision.type)
To switch the Screensaver Type to Custom mode, please use this parameter:

#If it is set to 1 (Custom), the LCD screen will display the custom screen saver images (you need to upload custom image files to the IP phone).
screensaver.type = 1

Hope this will help.

My excuses, that was a typing error. I did use screensaver.type = 1. My parameters are:
screensaver.display_clock.enable = 1
screensaver.upload_url = http://x.x.x.x/televoip.jpg
screensaver.wait_time = 120
screensaver.type = 1
screensaver.picture_change_interval = 300
screensaver.clock_move_interval = 60

The other parameters work like intended, my only problem is not getting the screensaver type to custom.
11-02-2017 07:33 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
wim Offline
Junior Member
**

Posts: 4
Joined: Oct 2017
Reputation: 0
Post: #4
RE: Screensaver.type on T46S
(10-31-2017 04:06 PM)complex1 Wrote:  
(10-31-2017 02:54 PM)wim Wrote:  We are currently provisioning T46S but I cant figure out how to set screensaver.type to custom. We've uploaded our company's logo with screensaver.upload_url, everything else provisions just fine, except provision.type = 1 does not work. None of our T46S phones sets screensaver type to custom. T46G does it just fine. Ive added the line to both mac and common cfg files. Can anyone help how I could provision this 1 particular setting? I'm using firmware 66.81.188.4 on T46S and 28.81.188.4 on T46G

Hi,

I think you are using the wrong parameter (provision.type)
To switch the Screensaver Type to Custom mode, please use this parameter:

#If it is set to 1 (Custom), the LCD screen will display the custom screen saver images (you need to upload custom image files to the IP phone).
screensaver.type = 1

Hope this will help.

My bad, that was a typing error. I do use the parameter screensaver.type = 1. my parameters are as follows:
screensaver.display_clock.enable = 1
screensaver.upload_url = http://x.x.x.x/image.jpg
screensaver.wait_time = 120
screensaver.type = 1
screensaver.picture_change_interval = 300
screensaver.clock_move_interval = 60

All other parameters work as intended. I just cannot set screensaver type to custom via that line.
(This post was last modified: 11-02-2017 07:35 AM by wim.)
11-02-2017 07:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,544
Joined: Jan 2014
Reputation: 48
Post: #5
RE: Screensaver.type on T46S
(11-02-2017 07:34 AM)wim Wrote:  
(10-31-2017 04:06 PM)complex1 Wrote:  
(10-31-2017 02:54 PM)wim Wrote:  We are currently provisioning T46S but I cant figure out how to set screensaver.type to custom. We've uploaded our company's logo with screensaver.upload_url, everything else provisions just fine, except provision.type = 1 does not work. None of our T46S phones sets screensaver type to custom. T46G does it just fine. Ive added the line to both mac and common cfg files. Can anyone help how I could provision this 1 particular setting? I'm using firmware 66.81.188.4 on T46S and 28.81.188.4 on T46G

Hi,

I think you are using the wrong parameter (provision.type)
To switch the Screensaver Type to Custom mode, please use this parameter:

#If it is set to 1 (Custom), the LCD screen will display the custom screen saver images (you need to upload custom image files to the IP phone).
screensaver.type = 1

Hope this will help.

My bad, that was a typing error. I do use the parameter screensaver.type = 1. my parameters are as follows:
screensaver.display_clock.enable = 1
screensaver.upload_url = http://x.x.x.x/image.jpg
screensaver.wait_time = 120
screensaver.type = 1
screensaver.picture_change_interval = 300
screensaver.clock_move_interval = 60

All other parameters work as intended. I just cannot set screensaver type to custom via that line.

Hi,

Because your phone is running the Lydis v81 firmware, please use this parameter screensaver.mode = 1 (x.81.x.x) instead of screensaver.type = 1 (x.82.x.x) and try again.

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
11-02-2017 08:38 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
wim Offline
Junior Member
**

Posts: 4
Joined: Oct 2017
Reputation: 0
Post: #6
RE: Screensaver.type on T46S
(11-02-2017 08:38 AM)complex1 Wrote:  
(11-02-2017 07:34 AM)wim Wrote:  
(10-31-2017 04:06 PM)complex1 Wrote:  
(10-31-2017 02:54 PM)wim Wrote:  We are currently provisioning T46S but I cant figure out how to set screensaver.type to custom. We've uploaded our company's logo with screensaver.upload_url, everything else provisions just fine, except provision.type = 1 does not work. None of our T46S phones sets screensaver type to custom. T46G does it just fine. Ive added the line to both mac and common cfg files. Can anyone help how I could provision this 1 particular setting? I'm using firmware 66.81.188.4 on T46S and 28.81.188.4 on T46G

Hi,

I think you are using the wrong parameter (provision.type)
To switch the Screensaver Type to Custom mode, please use this parameter:

#If it is set to 1 (Custom), the LCD screen will display the custom screen saver images (you need to upload custom image files to the IP phone).
screensaver.type = 1

Hope this will help.

My bad, that was a typing error. I do use the parameter screensaver.type = 1. my parameters are as follows:
screensaver.display_clock.enable = 1
screensaver.upload_url = http://x.x.x.x/image.jpg
screensaver.wait_time = 120
screensaver.type = 1
screensaver.picture_change_interval = 300
screensaver.clock_move_interval = 60

All other parameters work as intended. I just cannot set screensaver type to custom via that line.

Hi,

Because your phone is running the Lydis v81 firmware, please use this parameter screensaver.mode = 1 (x.81.x.x) instead of screensaver.type = 1 (x.82.x.x) and try again.

Hope this will help.

Unfortunately, screensaver.mode = 1 does not work either. I've resetted the phone and provisioned again. screensaver type was still set to system.
11-02-2017 02:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,544
Joined: Jan 2014
Reputation: 48
Post: #7
RE: Screensaver.type on T46S
(11-02-2017 02:51 PM)wim Wrote:  
(11-02-2017 08:38 AM)complex1 Wrote:  
(11-02-2017 07:34 AM)wim Wrote:  
(10-31-2017 04:06 PM)complex1 Wrote:  
(10-31-2017 02:54 PM)wim Wrote:  We are currently provisioning T46S but I cant figure out how to set screensaver.type to custom. We've uploaded our company's logo with screensaver.upload_url, everything else provisions just fine, except provision.type = 1 does not work. None of our T46S phones sets screensaver type to custom. T46G does it just fine. Ive added the line to both mac and common cfg files. Can anyone help how I could provision this 1 particular setting? I'm using firmware 66.81.188.4 on T46S and 28.81.188.4 on T46G

Hi,

I think you are using the wrong parameter (provision.type)
To switch the Screensaver Type to Custom mode, please use this parameter:

#If it is set to 1 (Custom), the LCD screen will display the custom screen saver images (you need to upload custom image files to the IP phone).
screensaver.type = 1

Hope this will help.

My bad, that was a typing error. I do use the parameter screensaver.type = 1. my parameters are as follows:
screensaver.display_clock.enable = 1
screensaver.upload_url = http://x.x.x.x/image.jpg
screensaver.wait_time = 120
screensaver.type = 1
screensaver.picture_change_interval = 300
screensaver.clock_move_interval = 60

All other parameters work as intended. I just cannot set screensaver type to custom via that line.

Hi,

Because your phone is running the Lydis v81 firmware, please use this parameter screensaver.mode = 1 (x.81.x.x) instead of screensaver.type = 1 (x.82.x.x) and try again.

Hope this will help.

Unfortunately, screensaver.mode = 1 does not work either. I've resetted the phone and provisioned again. screensaver type was still set to system.

Hi,

I can’t help you any further. Sorry for that.
It looks like you have found a bug.
I think the people of Yealink (support) can help you better or contact Lydis (Yealink distributer) about this issue. Firmware x.81.188.4 is customized by them.
http://www.lydis.nl or mail to info@lydis.nl

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
11-02-2017 10:13 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Common config with t46s not working Alan11111111 3 13,280 09-08-2017 11:03 AM
Last Post: Fuur
  T40P DSS Deal Type? GIWM 5 14,344 04-26-2017 05:50 PM
Last Post: GIWM
  T46G provision screensaver settings n1cks21 1 8,783 10-11-2016 09:37 PM
Last Post: n1cks21
  Chnage conference type yeacpt 1 7,943 06-21-2016 09:53 PM
Last Post: yeacpt
  T46 auto provision dtmf type KristianMedK 4 14,695 10-15-2015 02:17 PM
Last Post: KristianMedK
  Programmable Softkey Multicast Paging Type 24 Cloud9phone 3 11,454 08-29-2014 10:29 PM
Last Post: jasit

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication