[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G weekly provision problem
Author Message
engine411 Offline
Member
***

Posts: 115
Joined: May 2013
Reputation: 1
Post: #1
T46G weekly provision problem
Having trouble getting my T46G to provision on the weekly schedule. I use 3CX and am trying to get the proper configuration into the 3CX template to roll this out to all our phones.

So far, I've successful getting the Weekly, Time, and Day Of Week settings configured, but no matter what I do in the template, the Weekly Upgrade Interval and Inactivity Time Expire settings do not populate. I can't find those exact settings in the template.

Any 3CX users out there that have this working correctly?


Attached File(s) Thumbnail(s)
   
10-25-2017 01:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #2
RE: T46G weekly provision problem
(10-25-2017 01:50 PM)engine411 Wrote:  Having trouble getting my T46G to provision on the weekly schedule. I use 3CX and am trying to get the proper configuration into the 3CX template to roll this out to all our phones.

So far, I've successful getting the Weekly, Time, and Day Of Week settings configured, but no matter what I do in the template, the Weekly Upgrade Interval and Inactivity Time Expire settings do not populate. I can't find those exact settings in the template.

Any 3CX users out there that have this working correctly?

Hi,

Did you add next two parameters to the template?
static.auto_provision.weekly_upgrade_interval =
static.auto_provision.inactivity_time_expire =

After adding these parameters to the template, please restart 3CX services to load the templates.

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
10-25-2017 02:10 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
engine411 Offline
Member
***

Posts: 115
Joined: May 2013
Reputation: 1
Post: #3
RE: T46G weekly provision problem
@complex1, that is a good point in the right direction, thank you. What is the meaning of this setting and its value: Weekly Upgrade Interval(0~12week)

I think it means "every x weeks", but what is the difference between a value of 0 and 1? Which value means "every week"?
10-26-2017 02:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #4
RE: T46G weekly provision problem
(10-26-2017 02:32 PM)engine411 Wrote:  @complex1, that is a good point in the right direction, thank you. What is the meaning of this setting and its value: Weekly Upgrade Interval(0~12week)

I think it means "every x weeks", but what is the difference between a value of 0 and 1? Which value means "every week"?

Hi,

The difference between a value of 0 and 1 is if it is set to 0 or 1, the IP phone will perform an auto provisioning process every other week.
Do you want to perform an auto provisioning every week, then use the value 2~12

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
10-26-2017 03:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
engine411 Offline
Member
***

Posts: 115
Joined: May 2013
Reputation: 1
Post: #5
RE: T46G weekly provision problem
Here is my config for this auto provision. What I want is for the phone to reprovision each week on Thursday between 10:40 and 11:05 after it's inactive for 2 minutes. Are these settings correct to accomplish that?

auto_provision.weekly.enable = 1
auto_provision.weekly.dayofweek =
auto_provision.weekly_upgrade_interval = 0
auto_provision.inactivity_time_expire = 2

#Configure the start time of the day for the phone to check new configuration files. The default value is 00:00.
#It is only applicable to "Weekly" and "Power on + Weekly" modes.
#If the desired start time of the day is seven forty-five a.m., the value format is 07:45.
auto_provision.weekly.begin_time = 10:40


#Configure the end time of the day for the phone to check new configuration files. The default time is 00:00.
#It is only applicable to "Weekly" and "Power on + Weekly" modes.
#If the desired end time of the day is seven forty-five p.m., the value format is 19:45.
auto_provision.weekly.end_time = 11:05

#Configure the day of week for the phone to check new configuration files. The default vaule is 0123456.
#0-Sunday,1-Monday,2-Tuesday,3-Wednesday,4-Thursday,5-Friday,6-Saturday;
#It is only applicable to "Weekly" and "Power on + Weekly" modes.
#If the desired week is Monday, Tuesday and Wednesday, the value format is 012.
auto_provision.weekly.mask = 4

(10-26-2017 03:00 PM)complex1 Wrote:  
(10-26-2017 02:32 PM)engine411 Wrote:  @complex1, that is a good point in the right direction, thank you. What is the meaning of this setting and its value: Weekly Upgrade Interval(0~12week)

I think it means "every x weeks", but what is the difference between a value of 0 and 1? Which value means "every week"?

Hi,

The difference between a value of 0 and 1 is if it is set to 0 or 1, the IP phone will perform an auto provisioning process every other week.
Do you want to perform an auto provisioning every week, then use the value 2~12

Hope this will help.

That doesn't make sense to me, but that's been the case before with Yealink settings that worked when I tried them. I'll try it. Thanks.
(This post was last modified: 10-26-2017 03:02 PM by engine411.)
10-26-2017 03:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #6
RE: T46G weekly provision problem
This is what I have read in the Admin Guide:
Configures the time interval (in weeks) for the IP phone to perform an auto provisioning.
If it is set to 0, the IP phone will perform an auto provisioning process at the specific day(s) configured by the parameter “static.auto_provision.weekly.dayofweek” every week.
If it is set to other values (for example 3), the IP phone will perform an auto provisioning process at a random day between the specific day(s) configured by the parameter “static.auto_provision.weekly.dayofweek” every three weeks.

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
10-26-2017 03:15 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
engine411 Offline
Member
***

Posts: 115
Joined: May 2013
Reputation: 1
Post: #7
RE: T46G weekly provision problem
I'm beginning to think these phones have a bug. I've attached the settings seen in the phone's Web interface. These settings are supposed to say "reprovision every Thursday between 16:54 and 16:58".

But the phone does not reprovision. So regardless of whether my 3CX template is configured correctly, the phone doesn't seem to follow the settings in its web interface.

Questions; maybe my assumptions are wrong.
  1. When the phone reprovisions, it will reboot, right?
  2. Are the settings in my attachment correct? They seem correct per the admin manual.


Attached File(s) Thumbnail(s)
   
10-26-2017 08:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #8
RE: T46G weekly provision problem
Hi,

There is no bug.
Your settings are correct and the phone will reboot during/after provisioning,
but the re-provisioning will only take place if you have make changes in the extension in 3CX.
So if there are no changes made in the past week then there is no need to re-provisioning the phone.
Just checked on my T48G running v82 and 3CX 15.5 SP1

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
10-26-2017 09:47 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
engine411 Offline
Member
***

Posts: 115
Joined: May 2013
Reputation: 1
Post: #9
RE: T46G weekly provision problem
(10-26-2017 09:47 PM)complex1 Wrote:  Hi,

There is no bug.
Your settings are correct and the phone will reboot during/after provisioning,
but the re-provisioning will only take place if you have make changes in the extension in 3CX.
So if there are no changes made in the past week then there is no need to re-provisioning the phone.
Just checked on my T48G running v82 and 3CX 15.5 SP1

Hope this will help.

Okay - thank you for your kind assistance.
10-27-2017 10:51 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Need bin and rfs files SIP-T46G RobbyK 1 737 01-11-2024 11:26 PM
Last Post: complex1
  SIP-T46G Need firmware update instructions RobbyK 2 974 01-11-2024 10:52 PM
Last Post: RobbyK
  Provision Button back to blank glennbtn 0 407 01-10-2024 06:34 PM
Last Post: glennbtn
  T46G recovery files evoip 1 1,373 10-10-2023 12:46 AM
Last Post: Yisroel_MongoTEL
  T46G Multiple EXT Port amandah 2 1,978 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Photo T46G LED blinks when screen is off W 4 8,136 03-29-2023 05:36 AM
Last Post: matthewchubb
  T46G/S Multicast on PC Port Issue MiKeDaDoC 5 11,556 01-02-2023 01:30 AM
Last Post: kw160008
  T46G call completed elsewhere zimbocz 3 10,022 10-28-2022 03:28 AM
Last Post: tredd1982
  T46G SSL 2 & 3 Vulnerability russavd 0 1,430 09-24-2022 05:07 AM
Last Post: russavd
  T46G - shortcut to activate/ deactivate accounts? westats 4 5,474 07-07-2022 11:40 AM
Last Post: westats

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication