[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Multiple Lines on a Single Phone
Author Message
TomEdwards Offline
Junior Member
**

Posts: 2
Joined: Jul 2017
Reputation: 0
Post: #1
Multiple Lines on a Single Phone
Greetings,

I am attempting to have multiple appearance directory numbers (MADN) on multiple phone sets. They are ringing as expected, but when the second call arrives to that set, the line is marked "busy", even though that line is not active.

From my testing, it appears if any line is active on the set, all lines are marked busy. If I enable Call Waiting, the other lines will ring, even if one is active.

The problem with that is I want them to be marked busy if in use, so the "Hunt" action will take place and roll the next call to the next vacant line, which could be answered from another phone.

I hope this makes some sense.... I am using T46G sets....
09-26-2017 06:46 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Evan_Yealink Offline
Administrator
*******

Posts: 127
Joined: Mar 2017
Reputation: 0
Post: #2
RE: Multiple Lines on a Single Phone
Dear,

Good day!

For your question, I’ve attached one parameter for your reference.

phone_setting.call_appearance.calls_per_linekey=
Description:
Configures the maximum number of concurrent calls per line key for the IP phone. It applies to all registered lines.
If it is set to 0, there is no limit for the number of concurrent calls.
Example:
phone_setting.call_appearance.calls_per_linekey = 2
It means that you can have up to two concurrent calls per line key on the IP phone.

Note: The value configured by the parameter
“account.X.phone_setting.call_appearance.calls_per_linekey” takes precedence over that configured by this parameter. It is not applicable to SIP-T19(P) E2 IP phones.

Please use the call_appearance.cfg file via auto provision, and then have a test.

Any question, freely to let me know.

Regards,
Evan


Attached File(s)
.cfg  call_appearance.cfg (Size: 72 bytes / Downloads: 14)
09-28-2017 03:46 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
TomEdwards Offline
Junior Member
**

Posts: 2
Joined: Jul 2017
Reputation: 0
Post: #3
RE: Multiple Lines on a Single Phone
What version is this option in? V81? I am at V80 and do not see that. I rolled back to V80 due to a weird issue with the "Redial_Tone" option. I honestly have not pursued that issue in V81 due to other deadlines.
11-21-2017 09:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Release phone from Zoom to upgrade firmware jamesmknox 0 357 05-13-2024 02:41 AM
Last Post: jamesmknox
  2-way paging with no indication on phone nolto 1 2,318 05-11-2023 11:20 PM
Last Post: Yisroel_MongoTEL
  T57W - Using the Phone Directory bill@wesimplifyit.com 0 1,402 04-14-2023 12:41 AM
Last Post: bill@wesimplifyit.com
  W70B - 3CX phone book is not displayed completely ChrisGER 1 5,382 03-19-2023 07:31 PM
Last Post: thomas32
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted) maindriver 4 12,611 03-24-2022 10:25 PM
Last Post: maindriver
  Limit maximum of active calls per phone elastalink 5 15,907 09-09-2021 03:52 AM
Last Post: kapetrosyan
  Best way to manage line keys on multiple T48G/S sani390 0 3,707 07-01-2021 02:06 PM
Last Post: sani390
  Read specific variable from phone configuration saivo 0 3,701 06-13-2021 05:23 PM
Last Post: saivo
  Raw XML for Remote Phone Book rgranholm 1 7,391 03-24-2020 06:14 AM
Last Post: crazyau
  Setting phone to default to No Account by default when Off Hook InterLynx 4 17,262 01-08-2020 01:20 AM
Last Post: tfrazer

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication