[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W52P disable call ended display
Author Message
PhilipDarnell Offline
Junior Member
**

Posts: 1
Joined: Sep 2017
Reputation: 0
Post: #1
W52P disable call ended display
Hi

I have a 3CX system setup using W52Ps and T27Gs the way it is setup is 2 ring groups, if unanswered on the first ring group it fails over onto the second ring group. Some of the phones are in both rings groups. On the T27G this fails over seamlessly, unfortunately on the W52Ps it displays 'Call Ended' after the first ring group and then takes a second or so before the phone starts ringing again, is there anyway to disable the phone displaying call ended?
09-21-2017 09:39 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
janduy.manzanos@gmail.com Offline
Network and data communications analyst
**

Posts: 12
Joined: Jan 2016
Reputation: 0
Post: #2
RE: W52P disable call ended display
(09-21-2017 09:39 AM)PhilipDarnell Wrote:  Hi

I have a 3CX system setup using W52Ps and T27Gs the way it is setup is 2 ring groups, if unanswered on the first ring group it fails over onto the second ring group. Some of the phones are in both rings groups. On the T27G this fails over seamlessly, unfortunately on the W52Ps it displays 'Call Ended' after the first ring group and then takes a second or so before the phone starts ringing again, is there anyway to disable the phone displaying call ended?

Hello PhilipDarnell,

Let me see if I understand, the flame rings and then closed, right?

Upgraded equipment firmware?

Tested with other equipment to see if the same thing happens?
11-22-2017 07:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52P not working after change of broadband supplier Jasibansel 1 514 01-22-2024 07:15 PM
Last Post: complex1
Sad W52P not picking up IP Burkni 4 4,160 09-19-2023 06:22 PM
Last Post: Burkni
  W56H with W52P Base dmvcomms 7 7,399 03-06-2023 04:39 PM
Last Post: poznaniak
  W73H handset with W52P problem reboot Paco Brufal 2 2,804 03-03-2023 01:21 AM
Last Post: nolto
  W52P Repeater RT10/rt20/RT30 schnell-yealink 3 8,651 04-20-2022 10:17 PM
Last Post: complex1
  W52P Firmware upgrade aunijaffer@gmail.com 5 12,335 09-07-2021 11:42 PM
Last Post: complex1
  W52P 2 handsets DAZZLING 1 6,944 06-01-2021 09:55 PM
Last Post: complex1
  W52P Openvpn with mikrotik info@quantiss.com 4 17,336 04-11-2021 06:25 AM
Last Post: Harms_Kubiak
  Slow to ring on incoming call rodcrux 1 7,717 01-25-2021 07:10 PM
Last Post: complex1
  internal call between two base stations fails janus 1 7,241 01-07-2021 07:20 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication