[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Caller ID on attended transfer
Author Message
tcarter@teklinks.com Offline
Tim Carter
**

Posts: 5
Joined: Aug 2016
Reputation: 0
Post: #1
Caller ID on attended transfer
Hello,

I have an issue with caller ID not being passed on attended transfer. It works fine on blind transfer. The phones are T42G,T46G,T48G running XX.80.193.130 firmware. It also does the same on T46S running 66.81.193.110.

Example: Inbound caller to ext 101 receives call from John Doe @ 222-222-2222, transfers (attended) to ext 102, ext 102 receives the call but the display only shows Station 101 as the caller ID. Blind transfer displays the caller ID as John Doe 222-222-2222.

Any ideas?

Thanks,

Tim
08-30-2017 08:39 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Aishion_Yealink Offline
Administrator
*******

Posts: 116
Joined: Mar 2017
Reputation: 1
Post: #2
RE: Caller ID on attended transfer
(08-30-2017 08:39 PM)tcarter@teklinks.com Wrote:  Hello,

I have an issue with caller ID not being passed on attended transfer. It works fine on blind transfer. The phones are T42G,T46G,T48G running XX.80.193.130 firmware. It also does the same on T46S running 66.81.193.110.

Example: Inbound caller to ext 101 receives call from John Doe @ 222-222-2222, transfers (attended) to ext 102, ext 102 receives the call but the display only shows Station 101 as the caller ID. Blind transfer displays the caller ID as John Doe 222-222-2222.

Any ideas?

Thanks,

Tim
Dear Tim,

Do you mean after transfer when ext102 are talking with John Doe, the screen on ext102 display ext101 instead of John Doe 222-222-2222, if so, please kindly set below auto provision parameter:

account.x.refresh_remote_id.enable = 1
features.save_init_num_to_history.enable = 1

For more information about auto provision, please refer to below guide:

http://download.support.yealink.com/down...V81_70.pdf

If the issue still exist, please kindly reproduce the issue and offer us trace files about ext102 for further analysis as below:

a. Level 6 syslog
b. PCAP trace
c. Config.bin

You can get the guide from this link to see how to export the issue data:

http://support.yealink.com/faq/faqInfo?id=311

Any misunderstandings, please feel free to contact us.

Best Regards
Aishion
08-31-2017 02:30 PM
Find all posts by this user    like1    dislike0 Quote this message in a reply
tcarter@teklinks.com Offline
Tim Carter
**

Posts: 5
Joined: Aug 2016
Reputation: 0
Post: #3
RE: Caller ID on attended transfer
Thank you Aishion! That did correct the issue. Have a great day!
09-01-2017 02:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Aishion_Yealink Offline
Administrator
*******

Posts: 116
Joined: Mar 2017
Reputation: 1
Post: #4
RE: Caller ID on attended transfer
(09-01-2017 02:07 PM)tcarter@teklinks.com Wrote:  Thank you Aishion! That did correct the issue. Have a great day!

Dear Tim,

Gald to hear that and my pleasure. It's my honor to work with you.

​If you have another question, please feel free to create a new ticket to contact us.
-----------------------------------------Important Notification May Need Your Attention------------------------------------------------------------
Dear Yealink Cusotmer,
 
To Provide better technical support Service and best support experience, Yealink decide to open Yealink Ticket system service (https://ticket.yealink.com )to Yealink customers. and glad to inform you it’s ready now!
At the same time, Yealink plan to redefine the role of email support@yealink.com that after 2017-9-17, the mail will be only for Ticket login problems report or Case follow-up (Please provide ticket case ID), for technical case open and submit,  Please use Yealink Ticketing system. Hope your understanding.
 
How to get Yealink Ticket account? And what’s benefit? Here you go:
Yealink ticketing system (https://ticket.yealink.com ), is powerful, record-able and traceable system which definately brings value-add service to Yealink customers. Please following this guide http://support.yealink.com/faq/faqInfo?id=678 to Register and enjoy Yealink Ticketing Service with below valued-added benefit:
l Open & Manage & Trace case easily
l Communicate with Yealink technical support team directly to get latest update
l Check the status of your opened cases and review closed cases
The Ticket account also can be used for:
l Apply Skype for Business license for Yealink SFB phones.
l Login Yealink support website & forum to get more support resource about Yealink products
 
Best Regards
Yealink Technical Support Team
​----------------------------------------------------------------------------------------------------------------------------------------------------------------
09-04-2017 03:23 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Catherine33 Offline
Junior Member
**

Posts: 1
Joined: Oct 2017
Reputation: 0
Post: #5
RE: Caller ID on attended transfer
I am having this same problem with T56A and T58A phones..

I tried your suggestion of
account.x.refresh_remote_id.enable = 1
features.save_init_num_to_history.enable = 1

uploading it manually through Settings -> Configuration -> Upload File

Here are the entries I added to the configuration file I downloaded:

account.1.refresh_remote_id.enable = 1
account.2.refresh_remote_id.enable = 1
account.3.refresh_remote_id.enable = 1
account.4.refresh_remote_id.enable = 1
account.5.refresh_remote_id.enable = 1
account.6.refresh_remote_id.enable = 1
account.7.refresh_remote_id.enable = 1
account.8.refresh_remote_id.enable = 1
account.9.refresh_remote_id.enable = 1
account.10.refresh_remote_id.enable = 1
account.11.refresh_remote_id.enable = 1
account.12.refresh_remote_id.enable = 1
account.13.refresh_remote_id.enable = 1
account.14.refresh_remote_id.enable = 1
account.15.refresh_remote_id.enable = 1
account.16.refresh_remote_id.enable = 1

features.save_init_num_to_history.enable = 1

Then I uploaded it with the additional lines.

But no success!

Please tell me how to fix this!


(08-31-2017 02:30 PM)Aishion_Yealink Wrote:  
(08-30-2017 08:39 PM)tcarter@teklinks.com Wrote:  Hello,

I have an issue with caller ID not being passed on attended transfer. It works fine on blind transfer. The phones are T42G,T46G,T48G running XX.80.193.130 firmware. It also does the same on T46S running 66.81.193.110.

Example: Inbound caller to ext 101 receives call from John Doe @ 222-222-2222, transfers (attended) to ext 102, ext 102 receives the call but the display only shows Station 101 as the caller ID. Blind transfer displays the caller ID as John Doe 222-222-2222.

Any ideas?

Thanks,

Tim
Dear Tim,

Do you mean after transfer when ext102 are talking with John Doe, the screen on ext102 display ext101 instead of John Doe 222-222-2222, if so, please kindly set below auto provision parameter:

account.x.refresh_remote_id.enable = 1
features.save_init_num_to_history.enable = 1

For more information about auto provision, please refer to below guide:

http://download.support.yealink.com/down...V81_70.pdf

If the issue still exist, please kindly reproduce the issue and offer us trace files about ext102 for further analysis as below:

a. Level 6 syslog
b. PCAP trace
c. Config.bin

You can get the guide from this link to see how to export the issue data:

http://support.yealink.com/faq/faqInfo?id=311

Any misunderstandings, please feel free to contact us.

Best Regards
Aishion
10-27-2017 12:01 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #6
RE: Caller ID on attended transfer
Hi Aishion,

We have this same issue, I have added those parameters but the caller ID is still not handed off during the transfer.

I followed the steps to gather the PCAP, Config.bin and SYSLOG.

Can I send those two you,. I did reboot the T48S prior to the test. Thanks.

(09-01-2017 02:07 PM)tcarter@teklinks.com Wrote:  Thank you Aishion! That did correct the issue. Have a great day!

What Firmware version are you using? Thanks.
(This post was last modified: 12-21-2017 05:13 PM by Scott311.)
12-21-2017 04:41 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
PC112 Köln-Süd Offline
Junior Member
**

Posts: 3
Joined: Feb 2018
Reputation: 0
Post: #7
RE: Caller ID on attended transfer
In our Case the Issue also had not been fixed by adding the Parameters.
Maybe it only works with a specific FW Version?
Or did we made an mistake applying this fix?
We just uploaded the two Parameter lines in an CFG File using the
autprov. Function.
Was it right?
Or anything else to do?
Erol
PC112.de
(This post was last modified: 02-22-2018 12:31 PM by PC112 Köln-Süd.)
02-22-2018 12:09 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
tcarter@teklinks.com Offline
Tim Carter
**

Posts: 5
Joined: Aug 2016
Reputation: 0
Post: #8
RE: Caller ID on attended transfer
(12-21-2017 04:41 PM)Scott311 Wrote:  Hi Aishion,

We have this same issue, I have added those parameters but the caller ID is still not handed off during the transfer.

I followed the steps to gather the PCAP, Config.bin and SYSLOG.

Can I send those two you,. I did reboot the T48S prior to the test. Thanks.

(09-01-2017 02:07 PM)tcarter@teklinks.com Wrote:  Thank you Aishion! That did correct the issue. Have a great day!

What Firmware version are you using? Thanks.
66.81.193.110
02-22-2018 03:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
PC112 Köln-Süd Offline
Junior Member
**

Posts: 3
Joined: Feb 2018
Reputation: 0
Post: #9
RE: Caller ID on attended transfer
We would be very pleased if Support would answer.

Our Customer forces us to replace all the Yealink phones if this issue could not be fixed[/align] soon.
02-23-2018 09:35 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CEPM Nate Offline
Junior Member
**

Posts: 6
Joined: Feb 2018
Reputation: 0
Post: #10
RE: Caller ID on attended transfer
PC112, did you confirm that the lines are actually added to the config? (Export config file to check)
03-02-2018 06:01 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Remove transfer dialog on T46S bsnipes 0 515 12-05-2023 04:44 AM
Last Post: bsnipes
  T46U Caller ID Bitrez66 0 1,411 11-25-2022 05:58 PM
Last Post: Bitrez66
  Transfer error: Not Emergency Call tredd1982 0 1,903 10-28-2022 03:15 AM
Last Post: tredd1982
  T48U 'transfer.dsskey_deal_type' issue srcenturic 0 1,957 06-27-2022 02:52 PM
Last Post: srcenturic
  Attended Transfers not transferring snagrat 2 3,301 06-22-2022 01:53 AM
Last Post: snagrat
  cannot transfer to Park line button srcenturic 0 1,778 06-10-2022 01:41 AM
Last Post: srcenturic
  How to show caller Phone Number when call is forwarded gijoe 0 2,022 05-31-2022 07:40 PM
Last Post: gijoe
Bug Transfer to Broadworks Network Directory Contacts - screen timeout issue livehappy42 0 2,665 10-27-2021 07:58 AM
Last Post: livehappy42
  T48s setting outbound caller ID thunderzhao 1 5,043 09-10-2021 04:08 PM
Last Post: complex1
  extend input time transfer Krisje 5 9,443 03-22-2021 11:29 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication