[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48G Parking Call - Wazo - Version: 17.11 "Phoenix"
Author Message
JasonWarren Offline
Junior Member
**

Posts: 1
Joined: Aug 2017
Reputation: 0
Post: #1
T48G Parking Call - Wazo - Version: 17.11 "Phoenix"
Hello, I am working on migrating from Incredible PBX over to Wazo and am struggle with Call Parking.

T48G Firmware 35.81.0.70
In my PBX (WAZO) confirguration, call Parking is set to ext 700 with parked calls going to ext, 751-753.

I have tried just about every configuration I can possibly think of to get this straight. Here's the current behaviour

1) BLF with Park Slots are greyed out (ext. 751,752,753)
2) PARK CALL (I have tried a type=call park, transfer, intercom, etc.) is set to 700. This is greyed out
3) When external call comes in, I can press the PARK CALL button and I immediately hear music on the caller end. I have no idea where the call goes as the presence does not show on the BLFs
4) T48G screen shows the pause icon with the word HOLD written, but not sure were it went or how to retrieve it.
08-22-2017 04:09 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #2
RE: T48G Parking Call - Wazo - Version: 17.11 "Phoenix"
Dear Sir,

Please see the detail example:
A make a call to B(ext 700), B configure call park to ext 751,752,753, you configure BLF key to monitor 751-753 in phone C. But after you press the call park key to park the call success, all of the BLF keys are gray out. Also you can retrive the park call success. Then how can you retrive the call? What is the status of the BLF keys?

If any misunderstanding, please figure out to me.

There is an similar case, we solve that case by Enable Call Park notification in the server side, please try to configure this feature in the server side and test.

If the problem can not be solved, please provide the level 6 syslog, config.bin and pace trace of both phone B and C when you reproduce the issue, so we can do further trouble shooting.

Please refer to the FAQ to collect the three files:
http://support.yealink.com/faq/faqInfo?id=313

Please note to upgrade the firmware to the lasted firmware version:
http://download.support.yealink.com/down....0.110.zip

Besides, may i know how many phones you have in total? And how many of them have the issue?

Best Regards
Lucia
08-24-2017 09:23 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Van Offline
Junior Member
**

Posts: 3
Joined: Apr 2017
Reputation: 0
Post: #3
RE: T48G Parking Call - Wazo - Version: 17.11 "Phoenix"
Hi,

been using the same setup (Wazo, Yealinks) and spent some time earlier today trying to figure this out.
What worked for me is the guide here: http://sip.gr/downloads/How%20to%20use%2...0Phone.pdf

I can park calls and also have BLF feedback on the phone.
Please note that autoprovisioning from Wazo didn't work for me for these settings, so used the phone web interface.

Also, make sure that you check the parking strategy in Wazo, so that it always picks the first slot, not the next one. You may also have to restrict the number of parking slots to the number you expect necessary.

Try this and let us know if it worked...


(08-22-2017 04:09 PM)JasonWarren Wrote:  Hello, I am working on migrating from Incredible PBX over to Wazo and am struggle with Call Parking.

T48G Firmware 35.81.0.70
In my PBX (WAZO) confirguration, call Parking is set to ext 700 with parked calls going to ext, 751-753.

I have tried just about every configuration I can possibly think of to get this straight. Here's the current behaviour

1) BLF with Park Slots are greyed out (ext. 751,752,753)
2) PARK CALL (I have tried a type=call park, transfer, intercom, etc.) is set to 700. This is greyed out
3) When external call comes in, I can press the PARK CALL button and I immediately hear music on the caller end. I have no idea where the call goes as the presence does not show on the BLFs
4) T48G screen shows the pause icon with the word HOLD written, but not sure were it went or how to retrieve it.
08-28-2017 08:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #4
RE: T48G Parking Call - Wazo - Version: 17.11 "Phoenix"
Dear Sir,

If i do not misunderstand you, you can get the BLF Park feature work in Wizo, Yealink.

For the park slot, it is up to your configuration.
As we do not have the test environment of Wazo, so i take 3CX as an example, you can configure the DSS key as call park, the value as slot: SP1
When you are on a call, press the call park key, you can park the call to slot SP1.
If you configure the DSSkey as BLF in another phone, the value as slot SP1, after you park the call to slot SP1, the LED of the BLF key will be red, and if you press the BLF key, you can retrive the call in the other phone.

Best Regards
Lucia
08-31-2017 09:32 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48G/T49G on Ring Central? Gordon 2 9,278 12-27-2023 10:38 AM
Last Post: jseeley
  Call Waiting Beep glennbtn 0 434 12-18-2023 05:22 PM
Last Post: glennbtn
  t46u , call waiting, ring sles 1 819 11-30-2023 05:29 AM
Last Post: msachs
  T48G Top row keypad buttons requiring too much pressure after time Chris708 4 9,823 11-16-2023 01:08 AM
Last Post: here4real
  T48U BLF Park Call not working timotel 0 807 09-20-2023 07:20 AM
Last Post: timotel
  T48G Connected handset not answering or ending call with connected handset. Pettis 4 2,322 07-27-2023 05:38 AM
Last Post: Lissvazquez
  T43U T42S Call Park BLF robm 0 979 05-19-2023 12:16 AM
Last Post: robm
  Directed or group pickup call history softnetvoip 1 1,689 03-08-2023 10:53 PM
Last Post: softnetvoip
  Missed Call Does Not Appear in History bcmike 1 2,092 02-01-2023 05:07 AM
Last Post: complex1
  T46G call completed elsewhere zimbocz 3 10,013 10-28-2022 03:28 AM
Last Post: tredd1982

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication