[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48s show Talking on users who are not on an active call
Author Message
Daodeth Offline
Junior Member
**

Posts: 8
Joined: Oct 2017
Reputation: 0
Post: #21
RE: T48s show Talking on users who are not on an active call
(11-03-2017 12:47 PM)Scott311 Wrote:  I do not work with yealink and I do not know your voip provider. I would first export the config and see what that line code looks like. If it not the default it will show up in there. There is no setting in the GUI that I could ever find.

Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.
11-03-2017 01:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #22
RE: T48s show Talking on users who are not on an active call
(11-03-2017 01:17 PM)Daodeth Wrote:  
(11-03-2017 12:47 PM)Scott311 Wrote:  I do not work with yealink and I do not know your voip provider. I would first export the config and see what that line code looks like. If it not the default it will show up in there. There is no setting in the GUI that I could ever find.

Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.

No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.

Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.
11-03-2017 01:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Daodeth Offline
Junior Member
**

Posts: 8
Joined: Oct 2017
Reputation: 0
Post: #23
RE: T48s show Talking on users who are not on an active call
(11-03-2017 01:43 PM)Scott311 Wrote:  
(11-03-2017 01:17 PM)Daodeth Wrote:  
(11-03-2017 12:47 PM)Scott311 Wrote:  I do not work with yealink and I do not know your voip provider. I would first export the config and see what that line code looks like. If it not the default it will show up in there. There is no setting in the GUI that I could ever find.

Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.

No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.

Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.

So i have exported the config(cfg) from "setting/configuration/export CFG file/all settings"
I don't see any heading for "transfer:hang up."
3j
11-03-2017 01:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Daodeth Offline
Junior Member
**

Posts: 8
Joined: Oct 2017
Reputation: 0
Post: #24
RE: T48s show Talking on users who are not on an active call
(11-03-2017 01:43 PM)Scott311 Wrote:  
(11-03-2017 01:17 PM)Daodeth Wrote:  
(11-03-2017 12:47 PM)Scott311 Wrote:  I do not work with yealink and I do not know your voip provider. I would first export the config and see what that line code looks like. If it not the default it will show up in there. There is no setting in the GUI that I could ever find.

Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.

No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.

Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.

So I got the config from "settings/configuration/export CFG configuration/all settings" don't see any headings for "transfer:hang up"

Am I missing a step?
11-03-2017 01:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #25
RE: T48s show Talking on users who are not on an active call
(11-03-2017 01:57 PM)Daodeth Wrote:  
(11-03-2017 01:43 PM)Scott311 Wrote:  
(11-03-2017 01:17 PM)Daodeth Wrote:  
(11-03-2017 12:47 PM)Scott311 Wrote:  I do not work with yealink and I do not know your voip provider. I would first export the config and see what that line code looks like. If it not the default it will show up in there. There is no setting in the GUI that I could ever find.

Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.

No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.

Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.

So I got the config from "settings/configuration/export CFG configuration/all settings" don't see any headings for "transfer:hang up"

Am I missing a step?

It would be: transfer.hang_up_after_success_trans = 3

Mine was near the bottom of the config.
11-03-2017 02:01 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Daodeth Offline
Junior Member
**

Posts: 8
Joined: Oct 2017
Reputation: 0
Post: #26
RE: T48s show Talking on users who are not on an active call
(11-03-2017 02:01 PM)Scott311 Wrote:  
(11-03-2017 01:57 PM)Daodeth Wrote:  
(11-03-2017 01:43 PM)Scott311 Wrote:  
(11-03-2017 01:17 PM)Daodeth Wrote:  
(11-03-2017 12:47 PM)Scott311 Wrote:  I do not work with yealink and I do not know your voip provider. I would first export the config and see what that line code looks like. If it not the default it will show up in there. There is no setting in the GUI that I could ever find.

Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.

No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.

Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.

So I got the config from "settings/configuration/export CFG configuration/all settings" don't see any headings for "transfer:hang up"

Am I missing a step?

It would be: transfer.hang_up_after_success_trans = 3

Mine was near the bottom of the config.

Would you mind looking at my config and see if I'm missing something.


Attached File(s)
.cfg  001565c8a464-all.cfg (Size: 695 bytes / Downloads: 2)
11-03-2017 02:06 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #27
RE: T48s show Talking on users who are not on an active call
(11-03-2017 02:06 PM)Daodeth Wrote:  
(11-03-2017 02:01 PM)Scott311 Wrote:  
(11-03-2017 01:57 PM)Daodeth Wrote:  
(11-03-2017 01:43 PM)Scott311 Wrote:  
(11-03-2017 01:17 PM)Daodeth Wrote:  Are you exporting the config from the T48s, the trouble phones, or the Voip provider.
Sorry for the many questions, but thank you for the help.

No problem, and I understand I worked on this for quite some time. I am exporting the config from the phones.

Actually Yealink helped me find this issue, I exported it from the phone, changed the config on the phone and imported it back. I know its timely but if your VOIP provider has a specific area where you can set Parameters up on your phones you can add this too your entire subscriber base via a Parameter.

So I got the config from "settings/configuration/export CFG configuration/all settings" don't see any headings for "transfer:hang up"

Am I missing a step?

It would be: transfer.hang_up_after_success_trans = 3

Mine was near the bottom of the config.

Would you mind looking at my config and see if I'm missing something.

Now question for you before I look at it, does it do it on all of your phones? Because it did not do it on all of our phones. It seemed to be ones we had setup with a call group. I would make sure you have a phone that it specifically is happening on where it shows "Talking"
11-03-2017 02:09 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #28
RE: T48s show Talking on users who are not on an active call
Now question for you before I look at it, does it do it on all of your phones? Because it did not do it on all of our phones. It seemed to be ones we had setup with a call group. I would make sure you have a phone that it specifically is happening on where it shows "Talking"
11-03-2017 02:10 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Daodeth Offline
Junior Member
**

Posts: 8
Joined: Oct 2017
Reputation: 0
Post: #29
RE: T48s show Talking on users who are not on an active call
These 2 phones are doing showing talking, one is a t48s the other is T42s. What bothers me is that the T46s are all fine.


Attached File(s)
.cfg  001565c8a464-all (1).cfg (Size: 695 bytes / Downloads: 1)
11-03-2017 02:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #30
RE: T48s show Talking on users who are not on an active call
(11-03-2017 02:17 PM)Daodeth Wrote:  These 2 phones are doing showing talking, one is a t48s the other is T42s. What bothers me is that the T46s are all fine.

That doesn't look like the entire config of the phone. Mine was about 100-120 lines.
11-03-2017 02:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48s fw 66.84.0.15 Verizon - Need Recovery FW jonnya_ny 2 787 01-30-2024 05:23 AM
Last Post: jonnya_ny
  Call Waiting Beep glennbtn 0 436 12-18-2023 05:22 PM
Last Post: glennbtn
  T48S DSS softkeys can only show two at at time afogul 0 469 12-09-2023 05:50 AM
Last Post: afogul
  t46u , call waiting, ring sles 1 825 11-30-2023 05:29 AM
Last Post: msachs
  T48U BLF Park Call not working timotel 0 811 09-20-2023 07:20 AM
Last Post: timotel
  T48S Handset logo and menu style jseeley 0 730 09-05-2023 08:52 AM
Last Post: jseeley
  T48G Connected handset not answering or ending call with connected handset. Pettis 4 2,327 07-27-2023 05:38 AM
Last Post: Lissvazquez
  T48U BLF show line status for selected users integral 2 1,726 07-17-2023 12:51 AM
Last Post: integral
  T43U T42S Call Park BLF robm 0 984 05-19-2023 12:16 AM
Last Post: robm
  T48S BLF Talking vs Ringing JordanHVRA 0 1,019 04-05-2023 01:31 PM
Last Post: JordanHVRA

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication