[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48s show Talking on users who are not on an active call
Author Message
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #1
T48s show Talking on users who are not on an active call
This seems to happen too a lot of our CSR reps, they are in a call group for the outside lines and even though they are not on the phones it shows them talking on the DSSKeys.

If I reboot my phone it goes away but will come back as they send and receive calls.

Any suggestion for resolution?
08-10-2017 01:52 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Johnson_Yealink Offline
Administrator
*******

Posts: 65
Joined: Apr 2017
Reputation: 0
Post: #2
RE: T48s show Talking on users who are not on an active call
Dear Customer,

This is Johnson from Yealink technical support team. Nice to work with you.
You mean you setting BLF DSS key on your phone to monitor someone.
For example, you monitor A via setting a BLF DSS key.
When A on idle status, but on your phone you can see A is talking from the BLF DSS
key correct?

For this issue, please double check A whether enable DND feature or not?

Besides, please kindly provide the trace file and config.bin and level 6 log for me.

How to obtain above issue issue, please refer to below link?
http://support.yealink.com/faq/faqInfo?id=313

BR
Johnson
08-11-2017 09:39 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #3
RE: T48s show Talking on users who are not on an active call
Well I found the issue, but I can not find out how to resolve. I tried to upload the same config and it did not work. It seems a few of the DSSKey (BLFs) are missing the linekey.xx.line =1. Example from the exported config:

linekey.16.label = Stephanie
linekey.16.line = 1
linekey.16.type = 16
linekey.16.value = 464
linekey.16.xml_phonebook = 0
linekey.17.label = Scott
linekey.17.type = 16
linekey.17.value = 254
linekey.17.xml_phonebook = 0
linekey.18.label = Katie
linekey.18.type = 16
linekey.18.value = 225
linekey.18.xml_phonebook = 0
linekey.19.label = Kim
linekey.19.type = 16
linekey.19.value = 230
linekey.19.xml_phonebook = 0
linekey.2.label = Beth
linekey.2.line = 1
linekey.2.type = 16
linekey.2.value = 457
linekey.2.xml_phonebook = 0

As you can see Scott, Katie, and Kim are all missing the linekey.(dsskeynumber)line =1.

Attached config.bin.

I do not really have any way to recreate the issue, you should be able to see this from the config file. I also attached the cfg file as well that we are using and it shows all of the linekeys added appropriately.

(08-11-2017 09:39 AM)Johnson_Yealink Wrote:  Dear Customer,

This is Johnson from Yealink technical support team. Nice to work with you.
You mean you setting BLF DSS key on your phone to monitor someone.
For example, you monitor A via setting a BLF DSS key.
When A on idle status, but on your phone you can see A is talking from the BLF DSS
key correct?

For this issue, please double check A whether enable DND feature or not?

Besides, please kindly provide the trace file and config.bin and level 6 log for me.

How to obtain above issue issue, please refer to below link?
http://support.yealink.com/faq/faqInfo?id=313

BR
Johnson

Also DND feature is set for Off.


Attached File(s)
.bin  config (6).bin (Size: 572.02 KB / Downloads: 3)
.cfg  phoneconfig_t48s.cfg (Size: 8.12 KB / Downloads: 5)
(This post was last modified: 08-14-2017 04:36 PM by Scott311.)
08-14-2017 03:53 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Johnson_Yealink Offline
Administrator
*******

Posts: 65
Joined: Apr 2017
Reputation: 0
Post: #4
RE: T48s show Talking on users who are not on an active call
Dear Customer,

Only have config.bin file, I can't reproduce and confirm this issue.
Therefore, would you please try you best to reproduce this issue,
and provide trace file / level 6 log/ config.bin file for me.

BR
Johnson
08-16-2017 09:13 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #5
RE: T48s show Talking on users who are not on an active call
This is a T48S so the instructions are different from what you'd attached. Here is the file that a local 6 gives me.

I'm not sure how too reproduce this as the presense does not go away. I have an open ticket with Genband as well too see if there is a SIP notify issue.

I'll will not allow me too attach the .log file.
The type of file that you attached is not allowed. Please remove the attachment or choose a different type.
08-16-2017 03:25 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #6
RE: T48s show Talking on users who are not on an active call
After working with our SIP provider they have determined it is an issue with the T48S. \

The root cause appears to be a T48-S phone issue. The phone is not sending a BYE for the attended leg on an attended transfer. It should send the BYE after getting the NOTIFY. Other Yealink phones are sending this. Yealink will need to be engaged.
08-18-2017 06:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #7
RE: T48s show Talking on users who are not on an active call
Odd question but is it possible to get G firmware onto an S. According to our vendor the G model is tested and working but not the S.

Or is the specific chipset in the models different?
08-22-2017 07:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Johnson_Yealink Offline
Administrator
*******

Posts: 65
Joined: Apr 2017
Reputation: 0
Post: #8
RE: T48s show Talking on users who are not on an active call
Dear Customer,

For this issue,can you tell your phone firmware version?

Besides, T48G and T48S have different firmware.

Therefore, I advise you upgrade the firmware into the latest firmware version.
You can get it from below link.
http://download.support.yealink.com/down....0.110.rar


BR
Johnson
08-23-2017 01:00 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #9
RE: T48s show Talking on users who are not on an active call
We are using the latest firmware already.
Firmware Version 66.81.0.110

Will provide you with the lvl6

(08-23-2017 01:00 AM)Johnson_Yealink Wrote:  Dear Customer,

For this issue,can you tell your phone firmware version?

Besides, T48G and T48S have different firmware.

Therefore, I advise you upgrade the firmware into the latest firmware version.
You can get it from below link.
http://download.support.yealink.com/down....0.110.rar


BR
Johnson
08-23-2017 12:13 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Scott311 Offline
Junior Member
**

Posts: 17
Joined: May 2017
Reputation: 0
Post: #10
RE: T48s show Talking on users who are not on an active call
Johnson any update on this, I see the ticket I submitted is set too "Confirming and Fixing"

https://ticket.yealink.com/index.php/bug/52739
08-28-2017 01:13 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48s fw 66.84.0.15 Verizon - Need Recovery FW jonnya_ny 2 783 01-30-2024 05:23 AM
Last Post: jonnya_ny
  Call Waiting Beep glennbtn 0 434 12-18-2023 05:22 PM
Last Post: glennbtn
  T48S DSS softkeys can only show two at at time afogul 0 465 12-09-2023 05:50 AM
Last Post: afogul
  t46u , call waiting, ring sles 1 819 11-30-2023 05:29 AM
Last Post: msachs
  T48U BLF Park Call not working timotel 0 807 09-20-2023 07:20 AM
Last Post: timotel
  T48S Handset logo and menu style jseeley 0 726 09-05-2023 08:52 AM
Last Post: jseeley
  T48G Connected handset not answering or ending call with connected handset. Pettis 4 2,323 07-27-2023 05:38 AM
Last Post: Lissvazquez
  T48U BLF show line status for selected users integral 2 1,722 07-17-2023 12:51 AM
Last Post: integral
  T43U T42S Call Park BLF robm 0 979 05-19-2023 12:16 AM
Last Post: robm
  T48S BLF Talking vs Ringing JordanHVRA 0 1,017 04-05-2023 01:31 PM
Last Post: JordanHVRA

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication