(07-19-2017 08:29 AM)Danielll Wrote: Well guys, finally i bought for myself EHS36 remote connector to use with the Plantronics CS520 remote headset on one of the Yealink T26p telephone.Take after the EHS36 Client control guidelines identified with Plantronics remote headset, it neglects to work. At the point when inbound call to the T26p telephone, it rings however on the Platronics remote headset, I hear 3 short beeps rather than customary ring tone. After squeezing the noting catch on the Plantronics, I can't hear the guest. I saw the headset light Driven on unfaltering green and the T26p screen shows "Talking" status however I don't hear any voice. ...
Okay, - this answer may be somewhat too late. ;-) However, - I have found the reason of that problem. There seems to exist a
fundamental incompatibility with new EHS36 models (which contains firmware 4.16.0.0) and old V7x based IP phones.
I can confirm this for the T38G IP phone model. Solution:
EHS36 firmware downgrade!
I am now on EHS36 firmware v2.16.0.0 and my Plantronics CS540 is working almost perfectly! So everyone which has the same problem should try a EHS36 firmware downgrade.
Regarding the T26p IP phone model I recommend EHS36 firmware
v3.16.0.0. This one should be the correct one for V73 firmware based phones (like the T26p).
More Information can be found here:
http://forum.yealink.com/forum/showthread.php?tid=41584
Kind regards
lorn10