[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Shared Call Appearance unstable
Author Message
CraigFox Offline
Junior Member
**

Posts: 18
Joined: Apr 2013
Reputation: 0
Post: #1
Shared Call Appearance unstable
The SCA feature seems unstable. Calls are dropped while on hold.

In my scenario, two phones (T48s and W56p) are configured with the same extension (201). SCA seems to work fine, I can place a call on hold on one phone and pick up the call on the other and visa-versa.

If /when the active call drops, the W56p still sees an active SCA call (201 - held) while the T48s, accurately, shows no active call. The only way to get W56p, still seeing the an active SCA, to reset its call appearance is to initiate another call from the T48p.

I have been able to reproduce this. It only happens if the W56p is the device that places the call on hold. If the T48s places the call on hold the calls remain active until one of the devices picks up the call. After the W56p places the call on hold, the call drops 36 later. This will not happen if the call was put on hold from the T48s. Also active (talking) calls will not drop.

Using FreeSwitch v1.6.18
W56p Base firmware: 61.0.0.11
W56p Handset firmware 61.20.0.15

The glass is neither half full nor half empty, It's too big.
07-16-2017 04:14 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #2
RE: Shared Call Appearance unstable
Hi,

Please make sure the phones are running the latest firmware and try again.
T48S: http://download.support.yealink.com/down....0.110.rar
W56P: http://download.support.yealink.com/down...0.0.15.zip
W56H: http://download.support.yealink.com/down...0.0.15.zip

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
07-16-2017 10:05 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CraigFox Offline
Junior Member
**

Posts: 18
Joined: Apr 2013
Reputation: 0
Post: #3
RE: Shared Call Appearance unstable
They are... same issue.

I have verified the same using the same phones / systems / settings but replacing the
W56p with a T42s. Works fine.

Using barge in from the W56p also drops calls.

The glass is neither half full nor half empty, It's too big.
07-16-2017 01:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CraigFox Offline
Junior Member
**

Posts: 18
Joined: Apr 2013
Reputation: 0
Post: #4
RE: Shared Call Appearance unstable
I am pretty sure this is a bug in the firmware.

Has anyone gotten this to work with a W56? I've tries with two of them with no success.

The glass is neither half full nor half empty, It's too big.
07-17-2017 03:13 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #5
RE: Shared Call Appearance unstable
Hi,

I have tried your scenario with two phones (T48G and W56P) and a 3CX PBX, but I can not reproduce your issue.
Also when the W56P places the call on hold, the call never drops.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
07-17-2017 06:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CraigFox Offline
Junior Member
**

Posts: 18
Joined: Apr 2013
Reputation: 0
Post: #6
RE: Shared Call Appearance unstable
Appreciate you trying to help. Good to know that 3cx does not have the issue. We picked the phone based on Yealink's partnership with FreeSwitch. Perhaps we should have done more testing with other brands.

Anyone from Yealink want to chime in? This is a reproducible issues with a firmware based feature.

The glass is neither half full nor half empty, It's too big.
07-18-2017 08:24 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CraigFox Offline
Junior Member
**

Posts: 18
Joined: Apr 2013
Reputation: 0
Post: #7
RE: Shared Call Appearance unstable
Again thanks for the help.

Would you be able to upload the W56 SIP config file you are using so I can do a comparison?

The glass is neither half full nor half empty, It's too big.
07-19-2017 02:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #8
RE: Shared Call Appearance unstable
Hi,

Please help us to get trace files from W56P.
You will know the method via this FAQ: http://support.yealink.com/faq/faqInfo?id=313

And I need to confirm one question with you again.
You said you put the call on hold in W56P, after 36 it will drop.
Do you mean 36 seconds? 36 seconds every time?

Finally, can you tell me how many phones in your side now?
All DECT phones face this issue?
07-26-2017 09:06 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  permisson to Call list on t46S ist denied wolfi30 1 289 03-04-2024 02:08 PM
Last Post: wolfi30
  permission denied to call list wolfi30 0 231 02-23-2024 08:54 PM
Last Post: wolfi30
  MP54 Call Forwarding pureit2018 0 496 11-23-2023 07:58 AM
Last Post: pureit2018
  Enhanced DSS Key - Conference Call joe1st 0 524 11-11-2023 05:27 AM
Last Post: joe1st
  Unable to Answer call without pressing Line 1 TheKirbyGroup 0 646 11-03-2023 11:04 PM
Last Post: TheKirbyGroup
  Yealink T28 setup audible ring on 2nd incoming call JeffWilkinson 20 86,338 10-18-2023 12:59 PM
Last Post: sles
  Picking up a call does not display Caller's Name oliv 0 1,299 04-19-2023 04:25 PM
Last Post: oliv
  Yealink T27P -Incoming call issue rsarceno 0 1,249 01-25-2023 08:54 AM
Last Post: rsarceno
Information T27G call foward all Aerium 0 1,334 09-13-2022 04:36 PM
Last Post: Aerium
  Remebering call volume settings SystemCraft 1 2,526 07-15-2022 07:42 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication