[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
speaker on auto answer
Author Message
Sergey_9_ Offline
Banned

Posts: 5
Joined: Apr 2017
Post: #1
Question speaker on auto answer
I enabled auto answer function on line1, but when call is being auto answered, sound goes to handset and nobody hears it, so
How can i enable auto answer with speaker, instead of headphone?
07-03-2017 01:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #2
RE: speaker on auto answer
Can you check for me what is the model and firmware version of the phone?
How many phones have the problem?

If the model is DECT(W52 or W56), then you can use the parameter via auto provision below to disabled the handset auto answer:
custom.handset.auto_answer.enable=0
If the phone model is not DECT, then please provide the level 6 syslog, config.bin and pace trace for me to double check, i wil use your configuration to do test in my local side.

Thank you.
07-04-2017 06:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Sergey_9_ Offline
Banned

Posts: 5
Joined: Apr 2017
Post: #3
RE: speaker on auto answer
(07-04-2017 06:17 AM)Lucia Wrote:  Can you check for me what is the model and firmware version of the phone?
How many phones have the problem?

If the model is DECT(W52 or W56), then you can use the parameter via auto provision below to disabled the handset auto answer:
custom.handset.auto_answer.enable=0
If the phone model is not DECT, then please provide the level 6 syslog, config.bin and pace trace for me to double check, i wil use your configuration to do test in my local side.

Thank you.

Model of my phone is T21P E2, with firmware version 52.81.0.110.
I have only one yeastar phone, so this problem is only on one phone.
Syslog
.txt  001565ACD8CE.txt (Size: 59.61 KB / Downloads: 2) and
.bin  config.bin (Size: 189.02 KB / Downloads: 1) .
07-04-2017 07:12 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #4
RE: speaker on auto answer
Thank you for your reply.
Have already submit the files to our R&D to check. Any update, will let you know.
07-04-2017 09:04 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Sergey_9_ Offline
Banned

Posts: 5
Joined: Apr 2017
Post: #5
RE: speaker on auto answer
(07-04-2017 09:04 AM)Lucia Wrote:  Thank you for your reply.
Have already submit the files to our R&D to check. Any update, will let you know.

Are you still there?
I'm waiting for 1.5 days for your answer.
I don't know what to do.
07-06-2017 06:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #6
RE: speaker on auto answer
Yes, i am still here.
For this problem, our R&D are doing test and analyzing now. You know, it need time to solve problem.

As i can see in the log:

[SIP] <IPC_ntfp>:msg=0x00040105, wparam=0, lparam=32770, size=848, id=Undefied on dspg
<134>Jul 4 07:02:19 Log [1111]: VOIC<6+info > HandFree Status = [0]
<134>Jul 4 07:02:19 Log [1111]: VOIC<6+info > HandSet Status = [1]

It looks like the problem occured when the phone send message to the UI part. The UI invoke the HandSet instead of the HandFree.
And our R&D are doing test and try to locate the problem, but still need more time to fix it.

Please be patient, any update for this issue, i will let you know.

Best Regards
Lucia
07-06-2017 07:29 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Sergey_9_ Offline
Banned

Posts: 5
Joined: Apr 2017
Post: #7
RE: speaker on auto answer
(07-06-2017 07:29 AM)Lucia Wrote:  Yes, i am still here.
For this problem, our R&D are doing test and analyzing now. You know, it need time to solve problem.

As i can see in the log:

[SIP] <IPC_ntfp>:msg=0x00040105, wparam=0, lparam=32770, size=848, id=Undefied on dspg
<134>Jul 4 07:02:19 Log [1111]: VOIC<6+info > HandFree Status = [0]
<134>Jul 4 07:02:19 Log [1111]: VOIC<6+info > HandSet Status = [1]

It looks like the problem occured when the phone send message to the UI part. The UI invoke the HandSet instead of the HandFree.
And our R&D are doing test and try to locate the problem, but still need more time to fix it.

Please be patient, any update for this issue, i will let you know.

Best Regards
Lucia

I just wanted to make sure, that i'm not forgotten, sorry for misunderstanding.
Best regards
Sergey_9_
07-06-2017 07:56 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #8
RE: speaker on auto answer
Our R&D have done a lot of test, when the phone receive and auto answer the incoming call, the phone judge the handset is off hook, so the auto answer the call via handset, it is by design.

So please check if the handset is on hook. Two reason may cause this problem, please help to check:
1. you do not connect the handset or the handset is on hook.
2. the on hook key is demaged.

If when you press the on hook key, it still auto answer from the Speaker, then please help to do the test below:
press the on hook key for many times
press the Speaker key for many times

At the same time, provide the video of the whole test, the level 6 syslog, config.bin and pace trace for us to do further analyze.
Please export the log to the server side.
Refer to the FAQ to capture the three files:support.yealink.com/faq/faqInfo?id=313

Thank you.
07-07-2017 08:01 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Sergey_9_ Offline
Banned

Posts: 5
Joined: Apr 2017
Post: #9
RE: speaker on auto answer
(07-07-2017 08:01 AM)Lucia Wrote:  Our R&D have done a lot of test, when the phone receive and auto answer the incoming call, the phone judge the handset is off hook, so the auto answer the call via handset, it is by design.

So please check if the handset is on hook. Two reason may cause this problem, please help to check:
1. you do not connect the handset or the handset is on hook.
2. the on hook key is demaged.

If when you press the on hook key, it still auto answer from the Speaker, then please help to do the test below:
press the on hook key for many times
press the Speaker key for many times

At the same time, provide the video of the whole test, the level 6 syslog, config.bin and pace trace for us to do further analyze.
Please export the log to the server side.
Refer to the FAQ to capture the three files:support.yealink.com/faq/faqInfo?id=313

Thank you.

Hi Lucia!
After reading your answer i decided to check all you mentioned above and i discovered that my phone have non standard handset (i bought this phone on ebay) and size of handset is way too big to press on hook key.
Now i wonder how did i missed that...

I tried to press on hook button manually and call once more, all worked just great, it auto answered with speaker instead of handset.

Thanks for your help and have a nice day!
Best regards
Sergey_9_
07-07-2017 08:56 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Unable to Answer call without pressing Line 1 TheKirbyGroup 0 646 11-03-2023 11:04 PM
Last Post: TheKirbyGroup
  YEALINK AUTO PROVISION Dmitryche 1 6,426 08-09-2019 09:25 AM
Last Post: Paz_Yealink
  Auto firmware upgrade Kala 2 9,044 05-21-2018 03:50 PM
Last Post: Kala
  Multicast Paging force speaker jolouis 6 17,133 10-14-2016 10:15 PM
Last Post: jolouis
Star Auto sign in for Yealink T48G nixx 1 7,158 03-01-2016 05:55 AM
Last Post: Klaus_Yealink
  headphone auto answer renegadex 6 18,648 10-21-2015 11:31 PM
Last Post: julilluss
  T22 Lost Lock & Answer Feature lrwestrick 2 9,169 08-19-2015 03:13 AM
Last Post: Fabio Souza
  Answer second call or make a call when busy spapakons 9 43,604 02-24-2015 01:11 AM
Last Post: cloudneto
  t48G auto answering netswork 2 9,812 01-14-2015 02:17 PM
Last Post: CWR
  T48G Auto Provisioning For 3CX v12 Slator 1 10,165 10-22-2014 09:52 PM
Last Post: Slator

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication