SIP-T27/29 phones (setting) SOFT KEYS (call park)

[Shawn]

Hi Yealink:

Checking in to see if there has been any status change for this need:
Using either the SIP-T27G or SIP-T29G phones (current firmware) ...

Can we control the 4 SOFT KEYS (below the LCD screen)?
This was semi-possible back in the older firmware days (example) SIP-T22P.

Reason:
During a call (4 in-call SOFT KEYS) (transfer, Hold, Conference, More)

We would like to set one of these SOFT KEYS (to be Asterisk style CALL PARK).
Can we control the settings and change what the SOFT KEY for HOLD does?

We are speaking about the "in call" 4 SOFT KEYS (not when the phone is on hook).
We would rather have a CALL PARK button (than) a HOLD button.

Thinking about it:
It is a waste of a PFK button (when) all 4 or 5 are needed as parking orbits BLFs.

Can we control this via the .cfg file uploading process?
If you have the commands for this, thank you for information.

[Problemchild]

I would like an answer to this question too, on Cisco phones the Park option is there when on call no need to look for it . On the yeah link phones we currently have T41's, T27's & T46's the on call custom menu does not offer that option which puzzles me and I'm sure many others, the park option cannot be moved into the 1st on call screen instead forcing us to to press the "More" key and then selecting park to park the call. Additionally under the phone interface DDS Key >> Programmable key cannot be set to be a dedicated call park . Yeahlink really need to get this sorted so the phone can be more intuitive.

[anonymous1695900204539]

Follow up this issue in Tikcet:https://ticket.yealink.com/index.php/bug/57305

[Problemchild]

(11-02-2017 11:46 AM)Paul Wrote:  Follow up this issue in Tikcet:https://ticket.yealink.com/index.php/bug/57305

Will this solution also work for T41P & T46G phones?