Backlight LED blinking..

[Gilb]

hi,
the backlight led is stay on for 30 sec and the turn off for 1 sec and turn on for 30 sec again
how to change it to stay off until there is an action on device?
thanks..

[Karl_Yealink]

Hi,

This is Karl from Yealink support team.

About your issue,you can setting like below.
1.Go to web user interface.
2.Go to Settings->Preference
3.Select blacklight inactive level to off and select black time to 15(minimum)
The device's blacklight will turn off after 15sec without any action.And it will turn on again until an action here.

Hope this can help you.
Please feel free to contact with us any question!

[Gilb]

(07-11-2015 10:31 AM)Yealink_Karl Wrote:  Hi,

This is Karl from Yealink support team.

About your issue,you can setting like below.
1.Go to web user interface.
2.Go to Settings->Preference
3.Select blacklight inactive level to off and select black time to 15(minimum)
The device's blacklight will turn off after 15sec without any action.And it will turn on again until an action here.

Hope this can help you.
Please feel free to contact with us any question!

Changed it to 15sec,
and it still turn on for 15sec and turn off for 15sec and than turn on again
what's the problem?

thanks

[Karl_Yealink]

Hi,

You can reset to factory setting and try again.

Hope this can help you.
Please feel free to contact with us any question!