[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Poll: Are you seeing the same behavior in FW xx.81.0.110?
Yes - the clock stops working when MWI is lit
No - the clock works even when MWI is lit
[Show Results]
 
Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Possible Bug: MWI and Clock
Author Message
AMount Offline
Junior Member
**

Posts: 7
Joined: Apr 2015
Reputation: 0
Post: #1
Possible Bug: MWI and Clock
I've noticed an issue with my T21P E2 and T23G running xx.81.0.110. It is not happening on my T29G running the same version.

When MWI is lit, the clock won't update. For example:
  1. New message arrives at 13:21, MWI lights up
  2. Five minutes later, the clock still says 13:21
  3. If I lift the handset, the clock will update to the current time
  4. Once I put the handset back, the clock freezes again

When MWI is cleared and turns off, the clock works normally.

Can anyone else confirm this behavior?
(This post was last modified: 06-27-2017 11:49 PM by AMount.)
06-27-2017 08:28 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Johnson_Yealink Offline
Administrator
*******

Posts: 65
Joined: Apr 2017
Reputation: 0
Post: #2
RE: Possible Bug: MWI and Clock
Dear Customer,

This is Johnson from Yealink technical support team. Nice to work with you.
Good news.
This issue is fixed via xx.81.0.101 firmware.
You can download this firmware via below link.
http://ftp.yealink.com/?ShareToken=9C3EB...E5C0B7134C

Any update, please kindly let me know.

BR
Johnson
06-30-2017 01:44 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
AMount Offline
Junior Member
**

Posts: 7
Joined: Apr 2015
Reputation: 0
Post: #3
RE: Possible Bug: MWI and Clock
We've also discovered this happens when the missed call indicator is displayed.
07-12-2017 05:18 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Johnson_Yealink Offline
Administrator
*******

Posts: 65
Joined: Apr 2017
Reputation: 0
Post: #4
RE: Possible Bug: MWI and Clock
Dear Customer,

When you upgrade firmware to xx.81.0.101 version,
it also can fix this issue.

BR
Johnson
07-17-2017 09:51 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
AMount Offline
Junior Member
**

Posts: 7
Joined: Apr 2015
Reputation: 0
Post: #5
RE: Possible Bug: MWI and Clock
Hello Johnson,

I've installed firmware xx.81.0.104 on the T19PE2, T21PE2, T23G, T27P, and T40P, and the issue seems to be resolved.

Thank you.
07-18-2017 02:58 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
EducFor Offline
Junior Member
**

Posts: 3
Joined: Oct 2016
Reputation: 0
Post: #6
RE: Possible Bug: MWI and Clock
Hello Johnson,
I have also the same bug with T23G and firmware X.81.0.110
Where can I found firmware xx.81.0.101 or xx.81.0.104 as you suggest ?
Thank you
Best regards
09-18-2017 09:51 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication