[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T29G v81 During call set up, intercom or broadcast page will barge in and cancel call
Author Message
csmith Offline
Junior Member
**

Posts: 2
Joined: Sep 2016
Reputation: 0
Post: #1
T29G v81 During call set up, intercom or broadcast page will barge in and cancel call
I've tried almost all versions of v81 code and they all seem to behave the same way in this scenario.

If user A is making a call to user B, and user B has not answered the call yet (still ringing) and user C makes an intercom call to user A or a group page that user A is in , User A's call to B is cancelled and User C's page/intercom is auto answered.

It does not matter if "Intercom Barge" (features.intercom.barge) is enabled or disabled.

If I downgrade to V80 code, this does not happen.

Tried versions:
46.81.193.110
46.81.193.70
46.81.193.20
46.81.193.15

Diagnostic Files attached


Attached File(s)
.tar  allconfig.tar (Size: 1.23 MB / Downloads: 0)
(This post was last modified: 06-20-2017 01:01 PM by csmith.)
06-20-2017 12:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Fraukas2 Offline
Kolibri Telecommunication
**

Posts: 38
Joined: Jan 2017
Reputation: 0
Post: #2
RE:T29G v81 During call set up, intercom or broadcast page will barge in
Hi there !

Was about to suggest
Code:
features.intercom.barge=0
but you already tried.

A client of mine is running version X.81.0.20 and I'm running X.81.0.110 and we don't have the problem.

Sorry about that.
06-20-2017 01:57 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
csmith Offline
Junior Member
**

Posts: 2
Joined: Sep 2016
Reputation: 0
Post: #3
RE:
(06-20-2017 01:57 PM)Fraukas2 Wrote:  Hi there !

Was about to suggest
Code:
features.intercom.barge=0
but you already tried.

A client of mine is running version X.81.0.20 and I'm running X.81.0.110 and we don't have the problem.

Sorry about that.

Thanks for the suggestion, we run X.81.193.X for Broadsoft compatibility. This could be an issue in just that line of code.
06-20-2017 06:47 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  VP59 - No Wifi 5G with new Firmware // No Call Recording anymore vilionmedia 3 177 11-07-2020 03:44 AM
Last Post: complex1
  IP call (Direct call) with SRTP Gr2en 0 228 09-30-2020 08:36 AM
Last Post: Gr2en
Brick Yealink t29G | 5 seconds ring delay amichy 2 2,471 08-31-2020 11:08 PM
Last Post: gmanual
  Low intercom tone volume haukzinn 0 467 07-18-2020 08:27 PM
Last Post: haukzinn
  Direct IP Call Outside LAN with specific port BumbleBears 2 1,217 05-28-2020 02:13 PM
Last Post: Lewis-H
  Change certificate on login page HTTPS smartowl 5 1,684 04-20-2020 12:55 PM
Last Post: complex1
  Possible to have T27P switch back to first page of DSS Keys after a period of time? Bobcat19 2 3,890 11-13-2019 07:37 AM
Last Post: Ajani_Exetel
  Yealink T41S Call log JoseVM 1 1,212 09-08-2019 10:34 PM
Last Post: Babylonia
  BLF stop to work after undefined time on SIP-T29G econnet 1 1,691 06-30-2019 03:33 AM
Last Post: Jensen_Yealink
Exclamation Call log on after Att transfer VP-T49G Roksvel 4 2,554 06-18-2019 09:35 AM
Last Post: Roksvel

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication