[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auto Provision Firmware
Author Message
stratos Offline
Junior Member
**

Posts: 18
Joined: Dec 2015
Reputation: 1
Post: #1
Auto Provision Firmware
Hi,

How do you setup the T46 Phone to auto provision to upgrade to new firmware? I'm assuming you would have to download the latest firmware and put it on the phone server. Then, set the phone to auto provision a certain day(s) of the week.
I have many T46 phones and would like to upgrade them to the latest firmware but I didn't want to have to manually upgrade each phone.
I'm new at this so any help would be much appreciated.

Thank you.
06-08-2017 01:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
blakeflorin Offline
Junior Member
**

Posts: 12
Joined: Jun 2017
Reputation: 0
Post: #2
RE: Auto Provision Firmware
(06-08-2017 01:03 PM)stratos Wrote:  Hi,

How do you setup the T46 Phone to auto provision to upgrade to new firmware? I'm assuming you would have to download the latest firmware and put it on the phone server. Then, set the phone to auto provision a certain day(s) of the week.
I have many T46 phones and would like to upgrade them to the latest firmware but I didn't want to have to manually upgrade each phone.
I'm new at this so any help would be much appreciated.

Thank you.

quick run through....I may be missing something, but should get you going in the correct direction. All this should be in the autoprovisioning guides. Set your dhcp to send out the option for server provisioning address. If you dont set this option...you might as well just update each phone manually since you would have to manually enter the provisioning address in each phone.

Phones will be looking for a provisioning server now, either tftp or http. There are generic files all phone will try to download first before their unique config file. One of these files are y000000000000.boot. This is for all yealink phones. Template are available to download off the phone page. There are specific ones for each model...but if all your phones are the same model..this file should be fine. Generally you reference other config files to load from this file, but you should be able to drop this in that file-
firmware.url = tftp://<IPADDRESS>/<ROMNAME>.rom
save it and put it in the root directory of the provisioning server. Put your phones firmware in this same directory. Note it is case sensitive.

Default option on the phone should be to check for a provisioning file every night at midnight. If everything is correct, all phones should update

Your next problem is going to be saving the existing local configuration on each phone. I dont configure or save any local phone settings. Everything I set is off the provisioning. If you add this key at the end of that boot file, it may save your local config. You will need to look into this to verify.-
overwrite_mode = 0

So your y000000000000.boot would look like this-
#!version:1.0.0.1
## The header above must appear as-is in the first line

firmware.url = tftp://192.168.1.10/t46.rom
overwrite_mode = 0
06-08-2017 04:55 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
blakeflorin Offline
Junior Member
**

Posts: 12
Joined: Jun 2017
Reputation: 0
Post: #3
RE: Auto Provision Firmware
quick run through....I may be missing something, but should get you going in the correct direction. All this should be in the autoprovisioning guides. Set your dhcp to send out the option for server provisioning address. If you dont set this option...you might as well just update each phone manually since you would have to manually enter the provisioning address in each phone.

Phones will be looking for a provisioning server now, either tftp or http. There are generic files all phone will try to download first before their unique config file. One of these files are y000000000000.boot. This is for all yealink phones. Template are available to download off the phone page. There are specific ones for each model...but if all your phones are the same model..this file should be fine. Generally you reference other config files to load from this file, but you should be able to drop this in that file-
firmware.url = tftp://<IPADDRESS>/<ROMNAME>.rom
save it and put it in the root directory of the provisioning server. Put your phones firmware in this same directory. Note it is case sensitive.

Default option on the phone should be to check for a provisioning file every night at midnight. If everything is correct, all phones should update

Your next problem is going to be saving the existing local configuration on each phone. I dont configure or save any local phone settings. Everything I set is off the provisioning. If you add this key at the end of that boot file, it may save your local config. You will need to look into this to verify.-
overwrite_mode = 0

So your y000000000000.boot would look like this-
#!version:1.0.0.1
## The header above must appear as-is in the first line

firmware.url = tftp://192.168.1.10/t46.rom
overwrite_mode = 0
06-08-2017 04:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T48s Firmware update failed dangmoss 1 246 01-15-2022 04:40 AM
Last Post: complex1
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 784 01-14-2022 10:22 AM
Last Post: kumagera
  Provision - Server URL port coltarushalo 1 1,319 08-21-2021 12:36 AM
Last Post: complex1
Bug Provision DialNow settings Maciejp 2 1,721 08-13-2021 01:23 PM
Last Post: Maciejp
  Need to remove custom Fonality firmware 1CCT 16 21,163 05-03-2021 08:24 PM
Last Post: kmconklin
  SIP-T46s Bricked after latest firmware update. daniel.broome 2 3,534 04-27-2021 11:39 AM
Last Post: daniel.broome
  OEM Firmware change NotKnown 1 2,169 04-14-2021 07:41 PM
Last Post: complex1
  documentation and firmware T43u jmooo 0 2,171 02-18-2021 02:23 AM
Last Post: jmooo
  Avoid Firmware V85 at all costs! lukeescude 0 1,496 02-13-2021 12:06 AM
Last Post: lukeescude
Bug Yealink T46G wont turn on after firmware update mike702 1 2,641 02-02-2021 08:21 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication