[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Video Phone Collaboration
Author Message
ctiefel Offline
Junior Member
**

Posts: 24
Joined: Nov 2013
Reputation: 0
Post: #1
Video Phone Collaboration
We have a deployment at a client with 3 locations. The first has a VC400 and the other two have a VC110. Often times they will video conferences between all three locations. The locations with the VC110s are only utilizing 1 screen while the main location with the VC400 has two screens. The main locations is asking for a way to be able to display the other two locations with one on one screen and the other location on the other screen. As it is right now they can only show the other locations on one screen and themselves on another which they do not want. Is there a way to accomplish this?
05-09-2017 07:53 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Link_Yealink Offline
Junior Member
**

Posts: 4
Joined: Apr 2017
Reputation: 0
Post: #2
RE: Video Phone Collaboration
(05-09-2017 07:53 PM)ctiefel Wrote:  We have a deployment at a client with 3 locations. The first has a VC400 and the other two have a VC110. Often times they will video conferences between all three locations. The locations with the VC110s are only utilizing 1 screen while the main location with the VC400 has two screens. The main locations is asking for a way to be able to display the other two locations with one on one screen and the other location on the other screen. As it is right now they can only show the other locations on one screen and themselves on another which they do not want. Is there a way to accomplish this?

Yes, it can be accomplished to show two locations on screen one by one.

1. After meeting established , Set the layout as full screen of one participant by click the yellow button on remote controller
2. Then click the red button on remote controller "More"->"Focus(Display2)'->select to display the other participant on the sencond screen.
05-10-2017 06:56 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Reset Yealink phone mp56 with usb key DLEFEBVRE 0 1,371 09-04-2024 10:13 PM
Last Post: DLEFEBVRE
  Could Someone Give me advice on Yealink phone setup for remote work? rich20509 0 1,360 04-15-2024 01:26 PM
Last Post: rich20509
  Anyone use a Yealink phone with a Talkswitch PBX? abiza 1 1,621 04-12-2024 04:43 PM
Last Post: Thenand
  Yealink phone with hearing aids Jamie22RR 2 3,130 04-10-2024 11:08 PM
Last Post: WillDavies15
  Yealink VOIP phone losing connection every few minutes robertpowell 0 1,760 03-27-2024 02:29 PM
Last Post: robertpowell
  Yealink IP phone lesliefrench 0 1,372 01-25-2024 12:37 PM
Last Post: lesliefrench
  Remote Phonebook - Numbers Display Format On Phone Medryn 19 75,349 11-24-2023 02:28 AM
Last Post: shulem@theteklink.com
  IP Phone Login Error "ERR_INVALID_HTTP_RESPONSE" nolto 2 4,031 10-06-2023 04:34 PM
Last Post: nolto
  Multicast Stops Working until Phone Rebooted Blake1 10 16,553 09-21-2023 05:47 PM
Last Post: axiompm
  Is there a way to get the incoming caller phone number with an Action URI? troy44 1 2,362 09-04-2023 01:46 PM
Last Post: Regend_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication