[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Call Queue not working with the Grandstream UCM6202
Author Message
ttran Offline
Junior Member
**

Posts: 7
Joined: Mar 2015
Reputation: 0
Post: #1
Call Queue not working with the Grandstream UCM6202
I have the T22P, T28P, T26P, T41G, T46G, and T48G and I cannot get any of them to work with call queue on the Grandstream UCM6202 IP PBX box. Calling the queue from an internal extension works fine and the phone rings, but not from the outside line. Polycom and Grandstream phones works fine. All other features work fine except the call queue.

I contacted Grandstream and they said the problem is in the Yealink phones. Any solutions?
05-04-2017 05:46 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Travis_Yealink Offline
Super Moderator
******

Posts: 171
Joined: Mar 2016
Reputation: 1
Post: #2
RE: Call Queue not working with the Grandstream UCM6202
(05-04-2017 05:46 PM)ttran Wrote:  I have the T22P, T28P, T26P, T41G, T46G, and T48G and I cannot get any of them to work with call queue on the Grandstream UCM6202 IP PBX box. Calling the queue from an internal extension works fine and the phone rings, but not from the outside line. Polycom and Grandstream phones works fine. All other features work fine except the call queue.

I contacted Grandstream and they said the problem is in the Yealink phones. Any solutions?

Hi,

May I know what do you mean "call queue"? Do you mean second incoming call?
Please kindly clarify.

By the way, we never do the compatible test with Grandstream PBX, so normally we don't suggest customer use Yealink phone with the PBX we didn't do the IOT test.

Regards,
Travis_yealink
05-09-2017 12:25 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ttran Offline
Junior Member
**

Posts: 7
Joined: Mar 2015
Reputation: 0
Post: #3
RE: Call Queue not working with the Grandstream UCM6202
A call queue places incoming calls in line to be answered while extension users are busy with other calls. The queued calls are distributed to the next available extension user in the order received.
(This post was last modified: 05-09-2017 02:21 PM by ttran.)
05-09-2017 02:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Travis_Yealink Offline
Super Moderator
******

Posts: 171
Joined: Mar 2016
Reputation: 1
Post: #4
RE: Call Queue not working with the Grandstream UCM6202
(05-09-2017 02:20 PM)ttran Wrote:  A call queue places incoming calls in line to be answered while extension users are busy with other calls. The queued calls are distributed to the next available extension user in the order received.

On yealink phone, we support call waiting feature, but I believe for call queue feature you mentioned, it should be the server side supported feature, right?
when the callee is free, the system will inform the caller, and then they can establish the conversation.

So back to my first reply, Yealink phone never done the IOT test with Grandstream PBX, as you might know, Yealink and Grandstream are competitors, so I can't help you for this issue, hope your understanding.

Regards
05-10-2017 12:58 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #5
RE: Call Queue not working with the Grandstream UCM6202
(05-04-2017 05:46 PM)ttran Wrote:  Calling the queue from an internal extension works fine and the phone rings, but not from the outside line. Polycom and Grandstream phones works fine. All other features work fine except the call queue.

Just FYI The grandstream UCs are just embedded asterisk boxes that Grandstream locks down, so if Grandstream doesn't provide any support you might try looking for the issue related to Asterisk in general.

Having said that, what you describe does not make any sense at all, and without knowing your exact configuration it would be impossible to troubleshoot. I would say it sounds more like a general problem with the queue setup... when you says Polycom and GS phones work, have you tried replacing one of them with a Yealink set using the same extension/password? My guess is that it's not the phone that is the problem, but something to do with the extension configuration that you have the Yealink tied to.

From the phone's perspective all it sees are incoming calls; it has no clue whether those calls come from a ring group, a queue, an external # or an internal one... those are all concepts on the PBX side of things. So if you can dial the extension but it's not reachable as a member of the queue, it's a PBX setup issue.
05-11-2017 01:10 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ttran Offline
Junior Member
**

Posts: 7
Joined: Mar 2015
Reputation: 0
Post: #6
RE: Call Queue not working with the Grandstream UCM6202
No, it's not a setting issue. I have tried several Yealink phone models on the same extension that works with the Polycom and Grandstream phones. None of them are working with call queue when calling from an outside line. Grandstream said that's a Yealink issue, since other brands work fine with their PBX box and they don't want to support Yealink phones because it's their competitor. Does Yealink makes an IP PBX box? What other brands do you recommend?
05-16-2017 04:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Travis_Yealink Offline
Super Moderator
******

Posts: 171
Joined: Mar 2016
Reputation: 1
Post: #7
RE: Call Queue not working with the Grandstream UCM6202
(05-16-2017 04:27 PM)ttran Wrote:  No, it's not a setting issue. I have tried several Yealink phone models on the same extension that works with the Polycom and Grandstream phones. None of them are working with call queue when calling from an outside line. Grandstream said that's a Yealink issue, since other brands work fine with their PBX box and they don't want to support Yealink phones because it's their competitor. Does Yealink makes an IP PBX box? What other brands do you recommend?

Hi,

Yes, that's what I thought, GS and YL are compatitor, so it's more like the compatible issue, Yealink doesn't have own PBX, but we have well compatible with several PBXs, such as 3CX, FreePBX, asterisk, Yeastar and so on.

Anything I can help, freely to let me know.

Regards,
Travis
07-18-2017 02:09 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Adnanka Offline
Junior Member
**

Posts: 2
Joined: Mar 2018
Reputation: 0
Post: #8
RE: Call Queue not working with the Grandstream UCM6202
There are old version and old devices ip phone.
I can see, (End Of Life) yealink ip phones. I'm solved this problem, on the Grandstream 6202.

Que zone, "Alert Info"= " Ring1" select
Test call and you can see working. Okey?

Later, Please information us.

REGARDS
ADNAN
03-04-2018 04:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Adnanka Offline
Junior Member
**

Posts: 2
Joined: Mar 2018
Reputation: 0
Post: #9
RE: Call Queue not working with the Grandstream UCM6202
(07-18-2017 02:09 AM)Travis Wrote:  
(05-16-2017 04:27 PM)ttran Wrote:  No, it's not a setting issue. I have tried several Yealink phone models on the same extension that works with the Polycom and Grandstream phones. None of them are working with call queue when calling from an outside line. Grandstream said that's a Yealink issue, since other brands work fine with their PBX box and they don't want to support Yealink phones because it's their competitor. Does Yealink makes an IP PBX box? What other brands do you recommend?

Hi,

Yes, that's what I thought, GS and YL are compatitor, so it's more like the compatible issue, Yealink doesn't have own PBX, but we have well compatible with several PBXs, such as 3CX, FreePBX, asterisk, Yeastar and so on.

Anything I can help, freely to let me know.

Regards,
Travis


There are old version and old devices ip phone.
I can see, (End Of Life) yealink ip phones. I'm solved this problem, on the Grandstream 6202.

Que zone, "Alert Info"= " Ring1" select
Test call and you can see working. Okey?

Later, Please information us.

REGARDS
ADNAN
03-04-2018 06:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM joao.schlemm 8 24,880 12-27-2023 06:49 PM
Last Post: nolto
  T28P foward call doesn´t work with 2.73.0.50 Tato 4 11,563 09-14-2020 03:49 PM
Last Post: complex1
  default username/password not working after firmware upgrade tfrohling 3 37,569 02-15-2020 01:30 PM
Last Post: khalidnisar
  Attended transfer not working T29G chysky@slany.cz 1 6,286 02-11-2020 02:48 PM
Last Post: chysky@slany.cz
  T21P backlight not working after F/W update donb 0 4,564 11-07-2019 02:29 PM
Last Post: donb
  T22P Action URI ATrans and BTrans not working? DaveThompson 2 12,040 09-10-2019 10:47 AM
Last Post: DaveThompson
  Yealink T27G Not Working With 802.1x Auth After 3cx v14 to v15.5 Upgrade KM Tire IT Support 1 7,037 10-18-2018 05:06 PM
Last Post: KM Tire IT Support
Photo Yealink T21P E2 displays VIA and FROM headers on incoming call DmitryTsyganov 1 7,036 07-12-2018 07:28 PM
Last Post: johnkiniston
  T21P-E2 sends a CANCEL to put a call in hold Diego Juan 0 4,897 03-23-2018 02:52 PM
Last Post: Diego Juan
  T29G DSSKey functionality alternative number call AresK 4 12,226 12-13-2017 06:56 AM
Last Post: Evan_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication