[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T29G Firmware T29-46.81.0.70 Breaks DialPlan Rules
Author Message
fastdevice Offline
Junior Member
**

Posts: 13
Joined: Dec 2014
Reputation: 0
Post: #1
T29G Firmware T29-46.81.0.70 Breaks DialPlan Rules
DialPlan rules are no longer working with Auto provisioning.
03-26-2017 08:18 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #2
RE: T29G Firmware T29-46.81.0.70 Breaks DialPlan Rules
From your description, it is working before but now no longer working, then what operation you do before it fail to work?

Can you kindly tell me how do you configure in the auto provision file?
And figure out to me which one fial to work. It would be better if you can provide the config.bin for us to check. Thank you.
03-27-2017 10:26 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
fastdevice Offline
Junior Member
**

Posts: 13
Joined: Dec 2014
Reputation: 0
Post: #3
RE: T29G Firmware T29-46.81.0.70 Breaks DialPlan Rules
Hi Lucia,

Very frustrated over the new v81 firmware and lack of accurate documentation. The DialPlan rule syntax has changed and not well documented. The configuration tool still shows the rules using the prior syntax but it now requires a new syntax to work. Had to figure this out by trial-and-error. The same for Auto Provisioning. Auto Provisioning doesn't follow any of the prior or new documentation and behaves differently depending on whether you use a TFTP or Web server. I've sent your team PCAP and Syslogs showing the undocumented behavior and nobody responds. Am I the only one using a T29G with the new firmware?
03-27-2017 11:41 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 43
Post: #4
RE: T29G Firmware T29-46.81.0.70 Breaks DialPlan Rules
fastdevice Wrote:Very frustrated over the new v81 firmware and lack of accurate documentation.

Hi,

Are you saying all documentation of the v81_70 firmware is wrong/inaccurate?
Even the Admin Guide, Template Files and Release Notes?
Are you sure you have read the right documentation, which can be found here:
http://support.yealink.com/documentFront...umentId=15

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
03-27-2017 01:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
fastdevice Offline
Junior Member
**

Posts: 13
Joined: Dec 2014
Reputation: 0
Post: #5
RE: T29G Firmware T29-46.81.0.70 Breaks DialPlan Rules
I'm referring to config and provisioning guides.

The configuration tool outputs the old format dialplan: dialplan.dialnow.1.rule , while the template shows: dialplan.dialnow.rule.1 Honestly, this subtle change goes against portions of the Auto Provisioning guide the indicates that if the .boot files are not present, the phone will resort to using the older .cfg method.

Provided you are implementing an HTTP server for auto provisioning.

The Auto Provisioning Guide focuses on the, "y000000000000.boot" file and states that it tries to download this file first. When in fact, it actually looks for the mac.boot file first, NOT the "y000000000000.boot" Why couldn't the guide just state that it looks for the mac.boot and if not found, then look for "y000000000000.boot" However, even more important, it goes on to state that if the boot file is not found, it will then looks for common and mac.cfg files. Well, I can tell you that I let the phone sit for two days straight and it NEVER looks for anything but .boot files. And don't get me started with the behavior in encrypted mode. I spent hours mapping out the odd sequence of events when looking for .enc files. In fact, I've given up on encrypted.

Now if you move to a TFTP server, many behaviors are similar to the provisioning guide.
03-27-2017 06:16 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
fastdevice Offline
Junior Member
**

Posts: 13
Joined: Dec 2014
Reputation: 0
Post: #6
RE: T29G Firmware T29-46.81.0.70 Breaks DialPlan Rules
The configuration tool outputs the old format dialplan: dialplan.dialnow.1.rule , while the template shows: dialplan.dialnow.rule.1 Honestly, this subtle change goes against portions of the Auto Provisioning guide that indicates if the .boot files are not present, the phone will resort to using the older .cfg method.

Provided you are implementing an HTTP server for auto provisioning.

The Auto Provisioning Guide focuses on the, "y000000000000.boot" file and states that it tries to download this file first. When in fact, it actually looks for the mac.boot file first, NOT the "y000000000000.boot" Why couldn't the guide just state that it looks for the mac.boot and if not found, then look for "y000000000000.boot" However, even more important, it goes on to state that if the boot file is not found, it will then looks for common and mac.cfg files. Well, I can tell you that I let the phone sit for two days straight and it NEVER looks for anything but .boot files. And don't get me started with the behavior in encrypted mode. I spent hours mapping out the odd sequence of events when looking for .enc files. In fact, I've given up on encrypted.

Now if you move to a TFTP server, many behaviors are similar to the provisioning guide.
(This post was last modified: 03-27-2017 06:19 PM by fastdevice.)
03-27-2017 06:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #7
RE: T29G Firmware T29-46.81.0.70 Breaks DialPlan Rules
Dear,

Sorry for my late reply.

About the configuration tool, we will double check and modify it ASAP.

About the auto provision guide, it mention below:
he IP phone will try to download the MAC-Oriented boot file firstly and then download the
configuration files referenced in the MAC-Oriented boot file in sequence from the provisioning
server during the auto provisioning process. If no MAC-Oriented boot file is found, the IP phone
will try to download the common boot file and then download the configuration files referenced
in the common boot file in sequence. If no common boot file is found, the IP phone will try to
download the Common CFG file firstly, and then try to download the MAC-Oriented CFG file
from the provisioning server.
04-13-2017 02:23 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
fastdevice Offline
Junior Member
**

Posts: 13
Joined: Dec 2014
Reputation: 0
Post: #8
RE: T29G Firmware T29-46.81.0.70 Breaks DialPlan Rules
Hi Lucia,

This part of your statement does not work using an HTTP server, but does work using a TFTP server.

"...If no common boot file is found, the IP phone will try to
download the Common CFG file firstly, and then try to download the MAC-Oriented CFG file
from the provisioning server. "
(This post was last modified: 04-13-2017 04:30 AM by fastdevice.)
04-13-2017 04:08 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T21P E2 firmware upgrade janp 0 644 01-27-2024 02:43 AM
Last Post: janp
  Firmware upgrade fails on T21P E2 p.pasquino@technology4you.it 0 5,163 11-02-2021 04:42 PM
Last Post: p.pasquino@technology4you.it
  T29G not registering using TLS dscope 2 8,204 02-09-2021 10:53 PM
Last Post: pmurphy
  Using SIP-T29G with SangomaOS (parked calls) Shawn 0 4,796 01-09-2021 08:24 AM
Last Post: Shawn
  Multiline Transfer T29G pedro_indy 0 5,275 11-27-2020 01:11 AM
Last Post: pedro_indy
  T21P_E2 firmware 84.0.125 slow with VLAN GwenH 3 12,102 11-03-2020 11:01 PM
Last Post: complex1
  T26P Can not upgrade firmware martien.poels@bank2loyalty.com 2 9,468 09-21-2020 05:16 PM
Last Post: complex1
Lightbulb Yealink T28P Firmware Upgrade Fails Michelth 11 54,820 06-27-2020 10:13 AM
Last Post: complex1
Smile Can a T29G Config.bin file be uploaded into a T23G Red Stone Telecom 0 4,466 03-29-2020 08:35 PM
Last Post: Red Stone Telecom
  default username/password not working after firmware upgrade tfrohling 3 37,562 02-15-2020 01:30 PM
Last Post: khalidnisar

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication