[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Use case for Bluetooth enabled IP phones?
Author Message
bradpitt Offline
Junior Member
**

Posts: 6
Joined: Mar 2017
Reputation: 0
Post: #1
Use case for Bluetooth enabled IP phones?
Hi,

Soon we are moving to a new office and (maybe) we'll finally do the switch to this "new" VoIP thing Smile

So I'm evaluating different options and I'm thinking about using Yealink phones because I find them to be reasonably priced, but I have one use case in mind. I see that some of the phones support Bluetooth connectivity using BT40 USB dongle.

So, my colleague wants to pair his Android cell/mobile phone with his desktop IP phone using Bluetooth. When his mobile phone rings, he wants to answer the call using the paired desktop phone. He also wants the ability to transfer the call through VoIP to another IP phone/extension ("Oh, you need to talk to my colleague Mr Someone Else. Hold on a sec, I'll put you through.") Can this be achieved using Yealink hardware? Which Yealink phones support such functionality? If not, is this possible at all (maybe using some other hardware)? Thank you

Update 1: It's possible. See my reply below.
Update 2: Changed title to more accurate (was "Use case for BT40 Bluetooth dongle?")
(This post was last modified: 03-26-2017 07:07 PM by bradpitt.)
03-26-2017 09:11 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 43
Post: #2
RE: Use case for BT40 Bluetooth dongle?
Hi,

The BT40 Bluetooth USB Dongle support connectivity with a Bluetooth headset, not with a device such as a smartphone.
So what your colleague want to accomplish is not possible. I think it is not possible at all.

Please read the Datasheet and list of headsets which are compatible with Yealink IP Phones.
http://download.support.yealink.com/down...asheet.pdf
http://download.support.yealink.com/down...20V2.0.pdf

Hope this helps.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
03-26-2017 11:33 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bradpitt Offline
Junior Member
**

Posts: 6
Joined: Mar 2017
Reputation: 0
Post: #3
RE: Use case for BT40 Bluetooth dongle?
Thank you for your answer.

I did a little bit more research, and found out that it is actually possible, even with Yealink hardware. So far I found one model SIP VP-T49G (but it's way too much expensive), in which's user guide I found this:

Quote:Bluetooth-Enabled Mobile Phone

Yealink SIP VP-T49G IP phone supports the use of your IP phone in conjunction with Bluetooth-enabled mobile phone. You can do the following:

- Pair and connect your IP phone with a Bluetooth-enabled mobile phone to make and receive mobile calls. Your mobile phone is automatically assigned a line key on your IP phone.

But as I said, it's waaay out of my price range. So far I also found SPA525G2 phone from unknown manufacturer and they call this feature "Mobile Line". Also expensive, less expensive, but still. I would like not to mix phones of different manufacturers in deployment, so I'm searching further for more modestly priced alternatives.
(This post was last modified: 03-26-2017 01:15 PM by bradpitt.)
03-26-2017 01:06 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 43
Post: #4
RE: Use case for BT40 Bluetooth dongle?
Hi,

I thought your question was regarding the use of the BT40 Bluetooth Dongle…

bradpitt Wrote:I see that some of the phones support Bluetooth connectivity using BT40 USB dongle.

So, my colleague wants to pair his Android cell/mobile phone with his desktop IP phone using Bluetooth.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
03-26-2017 05:34 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bradpitt Offline
Junior Member
**

Posts: 6
Joined: Mar 2017
Reputation: 0
Post: #5
RE: Use case for BT40 Bluetooth dongle?
Hi,

yeah, you are right, so sorry for confusion. My bad. Actually I meant any IP phone with whatever Bluetooth capability (just thought that BT40 is the only possible way to add that capability to Yealink phones).

So, SIP VP-T49G is the only option from Yealink?
(This post was last modified: 03-26-2017 07:34 PM by bradpitt.)
03-26-2017 06:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #6
RE: Use case for Bluetooth enabled IP phones?
There is the Grandstream line of phones, GXP2130v2 - that supports this feature. It runs around $80.
It is not a touchscreen.
Has a smaller screen.
But it does have 8 BLF Buttons built in.

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
(This post was last modified: 03-27-2017 02:54 PM by CWR.)
03-27-2017 02:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #7
RE: Use case for Bluetooth enabled IP phones?
Just to throw another perspective in here since you said you are relatively new to VoIP.

Your scenario is kind of backwards from what most deployments typically see. In your setup, you are trying to have:
1) External caller -> Cell phone --> Desk Phone (--> PBX --> some other desk phone)

A few downsides to that approach:
1) As you have found, just finding hardware to support it is difficult.
2) Have not done it myself, but I would guess even with at VP-49G or any of the others people have mentioned, I suspect you would not be able to get the second part (Transfer from desk phone to somebody else's phone in the office) to work.
3) If somehow you could get #2 to work, the entire call is still relying on the cell phone to operate, so a) you're using cell minutes b) you're keeping that original cell phone busy until the call is done. c) If the person walks away with their cell while the call is happening, if it went out of Bluetooth range it'd drop.

To avoid all these issues the typical suggestion is to take the idea and turn it upside down, so you end up with a much more typical call flow:
1) External Caller -> Office PBX -> Desk Phone -> Call Forward or Follow-me -> Cell phone

Basically instead of having people call the cell direct, they call a dedicated number on the office PBX that is assigned to the specific desk phone. In the PBX you program things so that the system generates a second call from the PBX out to the cell phone (you can do this using follow-me, or call forwarding). If you're not sure, you can do it directly on the desk phone itself by using the Call Forward feature, and putting in the cell phone # as the "forward to" value.

Advantages to doing this way are:
1) Easily supported. Any Yealink phone will let you do the forwarding on it, or you can do it on PBX as long as your system supports it (virtually all should).
2) Transferring is now possible. Most PBXes have an "in call transfer" feature, so while you're talking on the cell because the call is going through the PBX, you dial that "in call transfer" and the PBX automatically takes the caller and forwards it over to somebody else, hanging up your cell phone. That means you can go off, leave the building, make other calls etc without worry about the other caller.

Of course there's more to it than that, as doing it this way also means you can now do proper central billing/CDR records, etc. Not sure if you're planning to handle the PBX yourself or what, but a VoIP vendor who knows their stuff would be an asset for this kind of thing.
(This post was last modified: 03-27-2017 07:33 PM by jolouis.)
03-27-2017 07:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jensen_Yealink Offline
Administrator
*******

Posts: 100
Joined: Jan 2012
Reputation: 0
Post: #8
RE: Use case for Bluetooth enabled IP phones?
(03-26-2017 09:11 AM)bradpitt Wrote:  Hi,

Soon we are moving to a new office and (maybe) we'll finally do the switch to this "new" VoIP thing Smile

So I'm evaluating different options and I'm thinking about using Yealink phones because I find them to be reasonably priced, but I have one use case in mind. I see that some of the phones support Bluetooth connectivity using BT40 USB dongle.

So, my colleague wants to pair his Android cell/mobile phone with his desktop IP phone using Bluetooth. When his mobile phone rings, he wants to answer the call using the paired desktop phone. He also wants the ability to transfer the call through VoIP to another IP phone/extension ("Oh, you need to talk to my colleague Mr Someone Else. Hold on a sec, I'll put you through.") Can this be achieved using Yealink hardware? Which Yealink phones support such functionality? If not, is this possible at all (maybe using some other hardware)? Thank you

Update 1: It's possible. See my reply below.
Update 2: Changed title to more accurate (was "Use case for BT40 Bluetooth dongle?")

Hi Bradpitt,

right now only T49G support this feature, but we have already add this requirement to our list and will support in our future release firmware.
03-28-2017 03:38 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Thongkon Offline
Junior Member
**

Posts: 2
Joined: Mar 2017
Reputation: 0
Post: #9
RE: Use case for Bluetooth enabled IP phones?
I think sensible Some phones can connect Bluetooth using the BT40 USB dongle.



แทงบอลออนไลน์
(This post was last modified: 03-29-2017 07:32 AM by Thongkon.)
03-29-2017 07:28 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Thongkon Offline
Junior Member
**

Posts: 2
Joined: Mar 2017
Reputation: 0
Post: #10
RE: Use case for Bluetooth enabled IP phones?
I think sensible Some phones can connect Bluetooth using the BT40 USB dongle.



แทงบอลออนไลน์
03-29-2017 07:30 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Phones no longer support Let Encrypt johnbeaumont 20 31,332 01-19-2024 08:09 AM
Last Post: tom-nbb
  Firmware phones T33G esoriano 1 884 12-13-2023 02:50 AM
Last Post: complex1
  MP54 Teams phones sometimes fail to log in jzcase 0 670 11-21-2023 12:26 AM
Last Post: jzcase
  Phones without a "server/PBX" kermitxyz 0 651 11-13-2023 02:26 AM
Last Post: kermitxyz
  Do Yealink IP Phones Support ZRTP? nolto 0 1,344 01-15-2023 11:35 PM
Last Post: nolto
  integrate Salesforce CRM to Yealink phones mehdi.ett 3 11,693 12-21-2022 02:20 PM
Last Post: Arun Kiran
  MP50 Phones not dialling az@a2z-computing.com 7 8,445 09-23-2022 09:35 PM
Last Post: Oksania
  Reconfigure a hundred phones? poznaniak 2 4,608 01-26-2022 06:41 PM
Last Post: poznaniak
  Are legacy phones a security risk? Tinov 2 5,773 01-22-2022 07:41 PM
Last Post: Amelie Davis
  Yealink Phones and CVE-2021-44228 DaveNL 0 3,431 12-15-2021 02:41 PM
Last Post: DaveNL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication