openvpn via autoP not working !

[yva]

hi all ,
i need some help with openvpn tar file and auto provisioning.
the setup is like that :

T26 with ver6.61.23.16 , i know its old ver but its complex system with 150 phones different places . (try to play others v61 also ).

now , i have openvpn server up and running . i created the client tar file .so far so good , if i upload the file from web interface the file upload and then successful connect to the openvpn server .

my problem is that i want use auto prov to push and enable the vpn option . so , in the mac.cfg i added the lines :
[ VPN ]
path = /config/Network/Network.cfg
EnableVPN = 1

[OPENVPN]
path = /tmp/download.cfg
server_address = http://192.168.168.231/vpn/client1.tar

this line do two things , first enable the vpn option , second tell the phone where is the tar file .
this line looks works because after the phone pull the mac.cfg the vpn option switch to enable , and if debug the access.log at 192.168.168.231 i see that the phone got the file :
192.168.1.8 - - [07/Jul/2015:22:35:09 +0300] "GET /vpn/client1.tar HTTP/1.0" 200 20480 "-" "yealink SIP-T26P 6.61.23.16 00:15:65:15:6e:be"

but , even everything looks good the phone come to enable in "vpn active" on the web but not try connect to vpn server . try to reboot after the phone retrieve all the configuration files , same problem .

on the openvpn server log i dont see any traffic from the phone .

please , any idea ? i am trying couple days to find the answer.

thanks

[James_Yealink]

Hello,

Can you try reversing the two parameter and check again?

[OPENVPN]
path = /tmp/download.cfg
server_address = http://192.168.168.231/vpn/client1.tar

[ VPN ]
path = /config/Network/Network.cfg
EnableVPN = 1

If it doesn't work please just upgrade one phone to new firmware for a test.

Regards,
James

[yva]

(07-08-2015 08:58 AM)Yealink_James Wrote:  Hello,

Can you try reversing the two parameter and check again?

[OPENVPN]
path = /tmp/download.cfg
server_address = http://192.168.168.231/vpn/client1.tar

[ VPN ]
path = /config/Network/Network.cfg
EnableVPN = 1

If it doesn't work please just upgrade one phone to new firmware for a test.

Regards,
James

try to replace , same problem .

now tried with ver70 , its not pull the tar file at all . maybe the syntax is different ? .the vpn on off working(EnableVPN = 1) , its just not pull the file
i dont want to jump to ver72 because all the provission template is completely different .
any idea?
thanks

[James_Yealink]

Can you reset phone, set the syslog level to 6, do an autoprovision then send the log to us.

Thanks
James

[yva]

(07-09-2015 08:25 AM)Yealink_James Wrote:  Can you reset phone, set the syslog level to 6, do an autoprovision then send the log to us.

Thanks
James

thanks ,

i will do it with v61 and v70 , it will be very helpful to resolve the issue wite v61 , then i dont need to upgrade 150 phone over the internet .
hope today to be on the lab , test and post the files .
thanks