[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T4X no beep on intercom answer
Author Message
jcaruso Offline
Junior Member
**

Posts: 20
Joined: May 2013
Reputation: 0
Post: #1
T4X no beep on intercom answer
We are utilizing two way intercom feature on one of our tenants. When they intercom from a T26 it will beep on the dialing phone once it connects to the other phone. When they intercom from a T48 or a T41 there is no beep or tone when the phones connect.

The settings under Features > Intercom match on both the T26 and T48. I've also tested on a T41P and it does not beep as well. Is there a way to enable the beep once the intercom is answered on the T4X?

The settings on Features > Intercom are set as follows:
Allow Intercom - Enabled
Intercom Mute - Disabled
Intercom Tone - Enabled
Intercom Barge - Disabled
03-22-2017 07:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #2
RE: T4X no beep on intercom answer
HI,

Can you tell me what is the version of the firmware?

Please kindly provide the level 6 syslog, config.bin and pace trace when you reproduce the issue to do further analyze.
You can refer to the FAQ below to get the three files:
http://support.yealink.com/faq/faqInfo?id=313

Before you do a test, please update the firmware to the latest version, go to the website to download the firmware:
http://support.yealink.com/documentFront...isplayPage

How many phones you have in total? and how many of them have the issue?
03-23-2017 09:38 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
JohnJ Offline
Junior Member
**

Posts: 9
Joined: Feb 2018
Reputation: 0
Post: #3
RE: T4X no beep on intercom answer
// SECURITY OPTION 1
// BEEP AN AUDIO ALERT WHEN AN INTERCOM STARTS
features.intercom.tone="1"

// SECURITY OPTION 2
// MUTE YOUR MIC – WHEN AN INTERCOM STARTS
features.intercom.mute="1"

// INTERCOM CONVERSATIONS RING YOUR PHONE TO ANSWER INSTEAD.
// LIFTING THE HANDSET(0) VS HANDSFREE CONVERSATION (1).
features.intercom.allow="1"

// BLOCK INTERCOM CALLS DURING ACTIVE CALLS
// It enables or disables the phone to answer an incoming intercom call while there is already an active call on the IP phone.
features.intercom.barge="0"
04-12-2022 04:46 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Call Waiting Beep glennbtn 0 434 12-18-2023 05:22 PM
Last Post: glennbtn
Wink Intercom and BLF eric@salemcomputer.com 4 9,221 11-04-2020 12:39 AM
Last Post: remingtonsmith
  Intercom tone - make louder? imfloridaguy 7 18,019 09-22-2020 06:54 PM
Last Post: Nraphan
Information Increase intercom tone value support@thearcehouse.com 14 30,937 09-22-2020 06:52 PM
Last Post: Nraphan
  Answer remotely anksharmoli 2 7,502 09-11-2019 04:00 PM
Last Post: Chris708
  Ring Mute while keeping intercom ring on Problemchild 1 8,382 05-09-2018 09:00 AM
Last Post: Kevin_Yealink
  T41P - Pressing Phone Line to Answer Call thenz 1 7,740 09-13-2017 07:09 AM
Last Post: Aishion_Yealink
  XML Beep volume ipcsolutions 2 7,600 09-10-2017 07:39 AM
Last Post: ipcsolutions
  SIP Notify Answer event on T4 range DMC_Support 2 6,997 08-10-2017 05:43 AM
Last Post: DMC_Support
  SIP Notify Answer event on T41 DMC_Support 0 4,643 08-03-2017 04:32 PM
Last Post: DMC_Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication