[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G + Exp40 Hangs
Author Message
chrischevy Offline
Junior Member
**

Posts: 25
Joined: Nov 2014
Reputation: 0
Post: #1
T46G + Exp40 Hangs
We installed a T46G with 4 EXP40 modules on FreePBX (80 BLF keys programmed in total)

Firmware is 28.80.0.95. I've tried more recent firmwares but the BLF keys would not work on the EXP40

The phone is powered via POE and there is an additional power supply plugged in the 3rd EXP module.

The phone works fine for a few hours (around 20 hours before the issue appeared last time) but after that, it stops ringing and and it cannot place outgoing calls. Arrows are showing that the call is being placed but it never completes.

A reboot fixes the issue temporarly.

Anyone else having this issue ?
(This post was last modified: 03-15-2017 03:39 AM by chrischevy.)
03-14-2017 04:47 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
chrischevy Offline
Junior Member
**

Posts: 25
Joined: Nov 2014
Reputation: 0
Post: #2
RE: T46G + Exp40 stops ringing
Ok here's a little update:

I've retried updating the firmware to the most recent version (28.81.0.70) and the 4 Exp40 Modules configured themselves, but only the first one (closest to the phone) seemed to worked correctly. All the lights on the other modules were out. (with an "x" by the icons)

I then tried to downgrade the firmware, one version at a time, doing a factory reset between each, and the newest firmware that I could get to work correctly is 28.80.0.130

I'm waiting to see if the phone will hang again tomorrow.
03-15-2017 03:10 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
chrischevy Offline
Junior Member
**

Posts: 25
Joined: Nov 2014
Reputation: 0
Post: #3
RE: T46G + Exp40 Hangs
Ok the phone just stopped working again.
It took around 20 hours, like last time.
I was running a capture on the FreePBX so I will have a lot of information available.
03-15-2017 07:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Klaus_Yealink Offline
Super Moderator
******

Posts: 180
Joined: Jul 2015
Reputation: 0
Post: #4
RE: T46G + Exp40 Hangs
Hello,

Do you mean after around 20 hours, when there is an incoming call, the phone will not ring? so please let me know is there any show on the lcd when there is an incoming call?

For this issue, I suggest you upgrade to 28.81.0.25 from our official web site, reset this phone, then do the below things:

1.change to power supply, then test again.please let me know the result.

2.decrease the EXP module to 3 or 2, then test again. please let me know the result.

3.please send me the config.bin and level 6 log about this issue(with 4 exp)

About how to get these files, please refer to this FAQ:

http://support.yealink.com/faq/faqInfo?id=311

klaus
03-17-2017 07:53 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
chrischevy Offline
Junior Member
**

Posts: 25
Joined: Nov 2014
Reputation: 0
Post: #5
RE: T46G + Exp40 Hangs
Issue just happened again with the latest firmware and 4 EXP40 modules. The 20 hours delay is no longer valid. It happened after 16-17 hours, so it's probably random.
I sent all the files to support.

We removed a lot of BLFs to check if it helps (went from around 80 to around 20)

Thanks
(This post was last modified: 03-17-2017 06:14 PM by chrischevy.)
03-17-2017 05:19 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bart@wiggers.com Offline
Junior Member
**

Posts: 2
Joined: Feb 2015
Reputation: 0
Post: #6
RE: T46G + Exp40 Hangs
Hi Chris,

Did you find the solution.
We have the same issue with only
the first EXP40 working.

Bart.
08-12-2018 10:59 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Asanka Offline
Junior Member
**

Posts: 18
Joined: Jun 2015
Reputation: 0
Post: #7
RE: T46G + Exp40 Hangs
Is your PABX local or hosted? If it's hosted or it gets NATed on the way to the PABXes, try changing the SIP listen port to something else other than 5060.

What we do is have unique SIP listen ports for all the pones because we had a lot of problems NAT causing issues with BLF as well as transfers.

AsankG
Corp VoIP
[Image: Exetel-Logo.png]
08-15-2018 01:32 AM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
chrischevy Offline
Junior Member
**

Posts: 25
Joined: Nov 2014
Reputation: 0
Post: #8
RE: T46G + Exp40 Hangs
We ended up using less BLFs, simple as that...
11-20-2018 08:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Need bin and rfs files SIP-T46G RobbyK 1 732 01-11-2024 11:26 PM
Last Post: complex1
  SIP-T46G Need firmware update instructions RobbyK 2 967 01-11-2024 10:52 PM
Last Post: RobbyK
  T46G recovery files evoip 1 1,368 10-10-2023 12:46 AM
Last Post: Yisroel_MongoTEL
  T46G Multiple EXT Port amandah 2 1,976 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Photo T46G LED blinks when screen is off W 4 8,133 03-29-2023 05:36 AM
Last Post: matthewchubb
  T46G/S Multicast on PC Port Issue MiKeDaDoC 5 11,552 01-02-2023 01:30 AM
Last Post: kw160008
  T46G call completed elsewhere zimbocz 3 10,016 10-28-2022 03:28 AM
Last Post: tredd1982
  T46G SSL 2 & 3 Vulnerability russavd 0 1,429 09-24-2022 05:07 AM
Last Post: russavd
  T46G - shortcut to activate/ deactivate accounts? westats 4 5,473 07-07-2022 11:40 AM
Last Post: westats
  WH63 Connect to T46G 79schultz 1 2,811 07-06-2022 03:08 PM
Last Post: markvdheijden

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication