[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48G Power LED blinking when screen off
Author Message
TM2-Megatron Offline
Junior Member
**

Posts: 4
Joined: Aug 2015
Reputation: 0
Post: #1
T48G Power LED blinking when screen off
After updating to the latest firmware on my T48G (35.81.0.25), I've noticed an irritating behavior that the phone never exhibited before. Whenever the screen goes off (in the GUI I have Unused Backlight set to off with a 2 minute delay), the Power LED light starts blinking slowly. This doesn't happen when I change the Unused Backlight setting to low.

I can't find any setting related to the Power LED that stops this from happening, nor do I know if this is simply the way the new firmware tells the phone to behave or not. I've tried a factory reset of the phone, and it still happens. It also isn't related to my VOIP service provider, as the phone exhibits the behavior before I even setup an SIP account on in it. If this is some new desired behavior, I'd appreciate an option be added in the phone's GUI to disable it. I find it irritating as I only want the LED to blink like that when there's a voicemail waiting. But now, whenever the screen goes off the phone behaves as if I have a voicemail, and the only way to know for sure is to hit a button to switch on the screen.
(This post was last modified: 03-05-2017 01:44 AM by TM2-Megatron.)
03-05-2017 01:41 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Werner1959 Offline
Member
***

Posts: 70
Joined: Nov 2016
Reputation: 0
Post: #2
RE: T48G Power LED blinking when screen off
Do you mean the same problem as here:
http://forum.yealink.com/forum/showthread.php?tid=34805
?
03-05-2017 08:15 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jensen_Yealink Offline
Administrator
*******

Posts: 100
Joined: Jan 2012
Reputation: 0
Post: #3
RE: T48G Power LED blinking when screen off
Hi, this LED flash is design by default to indicator the phone still live while enter power saving mode.
we will optimization the LED flash in our next version.
thanks for your feedback.
03-06-2017 04:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Werner1959 Offline
Member
***

Posts: 70
Joined: Nov 2016
Reputation: 0
Post: #4
RE: T48G Power LED blinking when screen off
Hi Jensen,

what do you mean with "our next version"? I hope you mean the next firmware and not the next phone-version??? Because this flashing ist absolutely not acceptable, if I cannot change this "default" with a parameter.
03-06-2017 08:16 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jensen_Yealink Offline
Administrator
*******

Posts: 100
Joined: Jan 2012
Reputation: 0
Post: #5
RE: T48G Power LED blinking when screen off
Hi Werner1959,

it is next release firmware but not the next phone-version.
thank you.
03-08-2017 07:27 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Artabanos Offline
Banned

Posts: 7
Joined: Nov 2016
Post: #6
RE: T48G Power LED blinking when screen off
(03-08-2017 07:27 AM)Jensen Wrote:  Hi Werner1959,

it is next release firmware but not the next phone-version.
thank you.

A new firmware was released today. But the issue still exists. So please clarify, what do you mean with "next" release?
03-14-2017 12:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
MHedish Offline
Junior Member
**

Posts: 2
Joined: May 2015
Reputation: 0
Post: #7
RE: T48G Power LED blinking when screen off
(03-06-2017 04:49 AM)Jensen Wrote:  Hi, this LED flash is design by default to indicator the phone still live while enter power saving mode.
we will optimization the LED flash in our next version.
thanks for your feedback.

How can you say this is "design by default?" This is a "new" item in the firmware. This is a CHANGE to the behavior of the device. No one likes it. No one.

I've never walked by my phone and wondered if it was still working. Oh, that's right, let's make it look like I have VM waiting. That'll let me know the phone is still working. Really?

I use a headset so the green headset light is always on. ALWAYS. That's one way to know the phone is working. Why emulate the MWI?

We need an option to turn off this useless "feature" now. Not months from now. There are plenty of people here that have all requested this be fixed.
03-14-2017 01:48 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Werner1959 Offline
Member
***

Posts: 70
Joined: Nov 2016
Reputation: 0
Post: #8
RE: T48G Power LED blinking when screen off
(03-08-2017 07:27 AM)Jensen Wrote:  It is next release firmware but not the next phone-version.
thank you.
The next firmware release was today. The problem is not solved. Why? Yealink MUST help us NOW. Blinking without missed call and without new message is stupid and therefore not acceptable.
03-14-2017 05:40 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #9
RE: T48G Power LED blinking when screen off
To all the people out there, please do not shout at the forum and keep it nice. This is really not necessarily and you don’t getting things faster. Only more frustrations. Maybe are some words not well formulated. Sorry about that. Be patience.

Please try next workaround where the display is at a low backlight level and let’s say after 3 hours the screensaver is going active. As for now the MWI led is not flashing.
Settings > Power Savings > Power Saving-Disabled
Settings > Preference > Screensaver Wait Time-3h
Settings > Preference > Active Backlight Level-1

Hope this helps.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
03-15-2017 01:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48G/T49G on Ring Central? Gordon 2 9,284 12-27-2023 10:38 AM
Last Post: jseeley
  T42G - Stuck at Welcome screen Maciejp 1 757 12-22-2023 01:47 AM
Last Post: complex1
  exp43 Stuck on Wellcome Screen nolto 5 4,306 12-15-2023 02:48 PM
Last Post: sles
  T48G Top row keypad buttons requiring too much pressure after time Chris708 4 9,824 11-16-2023 01:08 AM
Last Post: here4real
  T46U + EXP43 Stuck on Welcome Screen after update danantonielli 2 3,003 10-06-2023 10:04 PM
Last Post: roland@simplicloud.co.za
  T48G Connected handset not answering or ending call with connected handset. Pettis 4 2,327 07-27-2023 05:38 AM
Last Post: Lissvazquez
Photo T46G LED blinks when screen is off W 4 8,137 03-29-2023 05:36 AM
Last Post: matthewchubb
Information Toggle Power LED or update config via remote? 48design-cg 0 1,080 01-17-2023 05:32 PM
Last Post: 48design-cg
  T48G + EHS36 +Janra engage 75 not hanging up call kris.hetherington@firstsource.com 1 5,206 09-30-2022 03:23 AM
Last Post: knewgent
  T48G - TLS 1.2 Support for 3CX Futureweb 1 2,513 09-30-2022 12:55 AM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication