[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48G and EHS36 not detected after reboot
Author Message
Darren76 Offline
Junior Member
**

Posts: 3
Joined: Feb 2017
Reputation: 0
Post: #1
T48G and EHS36 not detected after reboot
We have a customer testing a T48G and EHS36.
T48 is on 35.80.0.130
their issue is that if the phone reboots due to a configuration change or loses power for any reason the EHS is required to be re-seated to work.

I have attempted to update the firmware on the EHS but have been unsuccessful in locating a process that works on the T48.
If I use the Zero Touch it does not does not start the expansion upgrade process

Unfortunately they do not have any other model of phone to complete the upgrade..

Cheers
02-23-2017 09:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Kevin_Yealink Offline
Administrator
*******

Posts: 204
Joined: Jul 2016
Reputation: 2
Post: #2
RE: T48G and EHS36 not detected after reboot
(02-23-2017 09:59 PM)Darren76 Wrote:  We have a customer testing a T48G and EHS36.
T48 is on 35.80.0.130
their issue is that if the phone reboots due to a configuration change or loses power for any reason the EHS is required to be re-seated to work.

I have attempted to update the firmware on the EHS but have been unsuccessful in locating a process that works on the T48.
If I use the Zero Touch it does not does not start the expansion upgrade process

Unfortunately they do not have any other model of phone to complete the upgrade..

Cheers

Hello

For the issue, you can upgrade the T48G to the newest firmware:
http://download.support.yealink.com/down...1.0.25.zip

Please kindly also tell me the firmware of the EHS now.

I also need to double check with you for the issue:
Do you means that the phone can work well with the EHS, if we reboot the phone, then we have to reset the EHS? Or we have to re-connect the EHS? Please kindly let me know what you means to 'be re-seated'

If the issue still exist, can you export the syslog to the server side. When the issue happened again, please export the syslog(level 6) to me.

Please kindly let me know if any update.
BR
Kevin
02-25-2017 01:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Darren76 Offline
Junior Member
**

Posts: 3
Joined: Feb 2017
Reputation: 0
Post: #3
RE: T48G and EHS36 not detected after reboot
Hello Kevin thank you for your response.
by re-seating I mean we need to unplug it from the phone and plug it back in,as the ehs36 is not detected and does not work untill we do.
the ehs36 works really well until this issue occurs.

How can i get the firmware version of the EHS36 ??

I will see what i can get in regards to the log

Regards

Darren
(This post was last modified: 02-28-2017 10:23 PM by Darren76.)
02-28-2017 10:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Kevin_Yealink Offline
Administrator
*******

Posts: 204
Joined: Jul 2016
Reputation: 2
Post: #4
RE: T48G and EHS36 not detected after reboot
(02-28-2017 10:20 PM)Darren76 Wrote:  Hello Kevin thank you for your response.
by re-seating I mean we need to unplug it from the phone and plug it back in,as the ehs36 is not detected and does not work untill we do.
the ehs36 works really well until this issue occurs.

How can i get the firmware version of the EHS36 ??

I will see what i can get in regards to the log

Regards

Darren

Hello Darren

Thanks for your information. For the issue, please kindly send the config.bin,syslog files to me.
As you need to reboot the phone when testing, please upload the syslog to the server side. For how to export the syslog, you can refer to the attachment.

After export the syslog to server side and reproduce the issue, please kindly send the syslog and config.bin files to me.

May i know how many phones in the customer side? it can help us to improve the priority.

BR
Kevin


Attached File(s)
.pdf  export the syslog to the server.pdf (Size: 1.14 MB / Downloads: 1)
03-02-2017 09:05 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T43Us going "No Service" after reboot jonschwab 2 367 03-12-2024 09:36 PM
Last Post: jonschwab
  T48G/T49G on Ring Central? Gordon 2 9,280 12-27-2023 10:38 AM
Last Post: jseeley
  T48G Top row keypad buttons requiring too much pressure after time Chris708 4 9,823 11-16-2023 01:08 AM
Last Post: here4real
  No dialtone - T46S, EHS36, Sennheiser headset Huleboer 0 1,914 09-28-2023 05:49 PM
Last Post: Huleboer
  T48G Connected handset not answering or ending call with connected handset. Pettis 4 2,325 07-27-2023 05:38 AM
Last Post: Lissvazquez
  T48G + EHS36 +Janra engage 75 not hanging up call kris.hetherington@firstsource.com 1 5,202 09-30-2022 03:23 AM
Last Post: knewgent
  ehs36 and planetronic mbroome 2 5,789 09-30-2022 03:19 AM
Last Post: knewgent
  T48G - TLS 1.2 Support for 3CX Futureweb 1 2,509 09-30-2022 12:55 AM
Last Post: complex1
  T41P/T48G/T58V IPv6 SIP Issues ReubenFarrelly 22 63,152 08-01-2021 06:14 PM
Last Post: Phil2021
Question T48G + WH66 Futureweb 1 4,247 06-09-2021 09:22 PM
Last Post: Futureweb

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication