[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSSKey to show Line Status
Author Message
Novais Offline
Junior Member
**

Posts: 8
Joined: Aug 2016
Reputation: 0
Post: #1
DSSKey to show Line Status
So this is going to be a bit of a newbie question but how would i be able to program the DSSKeys to display the outside line status from my Yeastar S20? I am using 4 FXO lines and i am sure the client will want a display status from each line.... I tried programming each Line as a separate key but lines 2-4 dont show, only Line 1. I can press the key and then the Line shows up but it picks up the next available outgoing line rather than its specific FXO port...
02-09-2017 06:23 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Michael_Yealink Offline
Administrator
*******

Posts: 46
Joined: Oct 2012
Reputation: 0
Post: #2
RE: DSSKey to show Line Status
hi Vovais

thanks for your information

for this question , i have searched and find Yeastar S20 is a PBX which can support FXO.

for phone side , we can use BLF feature to monitor different extensions' status by sending subscribe message and receive notify message from PBX side .

so for this issue,please check if phone side had configured BLF correctly , you can refer ot below guide , page 552
http://download.support.yealink.com/down...V81_20.pdf

if configure is OK , then please provide the trace file (level 6 log file , bin file , pcap file)of phone side so that i can check if any problem with phone side .
for how to get them and check they are useful, please refer to the FAQ below:
http://support.yealink.com/faq/faqInfo?id=311

at the same time it is also advised to check with Yeastar side to see if issue can be solved faster

TKS & BR

Michael
02-12-2017 02:30 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48S DSS softkeys can only show two at at time afogul 0 796 12-09-2023 05:50 AM
Last Post: afogul
  Red Triangle Icon in status KNERD 1 14,766 09-06-2023 12:13 AM
Last Post: JohnJ
  T48U BLF show line status for selected users integral 2 2,426 07-17-2023 12:51 AM
Last Post: integral
  Locking down buttons/No Line select blmarsa 0 1,456 10-06-2022 09:23 AM
Last Post: blmarsa
  T43U_BLF Like Key randomly changes to Line key Type DND Balavan 0 1,854 08-19-2022 09:37 PM
Last Post: Balavan
  cannot transfer to Park line button srcenturic 0 2,015 06-10-2022 01:41 AM
Last Post: srcenturic
  How to show caller Phone Number when call is forwarded gijoe 0 2,338 05-31-2022 07:40 PM
Last Post: gijoe
  T43-U incoming calls do not land on the correct line/button rtfm2022 7 9,280 05-12-2022 05:41 PM
Last Post: rtfm2022
  T46s Not showing DND status to other users vgraham 3 8,498 02-24-2021 02:23 PM
Last Post: Albert_Yealink
  Line Key6-10 Greyd Out - T46G redmondsau 0 3,580 10-02-2020 07:38 AM
Last Post: redmondsau

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication