Feedback - Firmware 35.8.0.60

[Matthias.]

Hi,

thanks for a new firmware. Refering to my feedback on firmware 35.8.0.50 here is my feedback about the latest firmware.

- Calls only displayed as number and not as Conatct from Outlook, Exchange or LDAP even with BToE. We found out that the name of the incoming caller is only displayed if the number is saved without the country code.

Our numbers are all stored in E.164 format an this won't work. -still not working-

- Playing voicemails calls the Exchange Voicemailbox and you need the pin. On the Lync phone edition you can play directly without pin. -still not working-

I would very much appreciate a feedback.

Thanks

[Steve.baptista]

Hey MK-Ask this worked for us for VM Pin

Steps:
1. Log in the web interface.
2. Go to Settings-> Auto Provision-> Server URL, and input the parameter “M7:account.1.voice_mail.skin_pin.enable = 0”
3. And Press “Confirm” and “Autoprovision Now”

Verify:
1. Go to the Voice mail Tap.
2. Press the Plan Voice Mail button, go to the Message Center to verify whether the Voice Mail require PIN.

[Matthias.]

Hi Steve,

thanks for your reply.

I've tried your steps but unfortunately it doesn't work for me.

So i wait for the next firmware release or maybe an answer from the yealink support.

[Yann]

(02-07-2017 11:23 AM)mk-ask Wrote:  - Calls only displayed as number and not as Conatct from Outlook, Exchange or LDAP even with BToE. We found out that the name of the incoming caller is only displayed if the number is saved without the country code.

Our numbers are all stored in E.164 format an this won't work. [b]-still not working-

Hi mk-ask, I found a very simple quick fix for this issue. Yealink phone do note read the "telephonenumber" attribute in active directory but the "ipPhone" one.
Just add the number in the correct field and it works like a charm.

Best regards
Yann

[ExplorerMichael111]

(03-22-2017 10:58 AM)Yann Wrote:  

(02-07-2017 11:23 AM)mk-ask Wrote:  - Calls only displayed as number and not as Conatct from Outlook, Exchange or LDAP even with BToE. We found out that the name of the incoming caller is only displayed if the number is saved without the country code.

Our numbers are all stored in E.164 format an this won't work. [b]-still not working-

Hi mk-ask, I found a very simple quick fix for this issue. Yealink phone do note read the "telephonenumber" attribute in active directory but the "ipPhone" one.
Just add the number in the correct field and it works like a charm.

Best regards
Yann

I can confirm this solution works. Previously had the same issue as the OP, running on the same firmware. Thanks Yann!

[Matthias.]

Thanks Yann and ExplorerMichael111 but this solution/workaround doesn't work for us.

But Yealink promised me a new firmware later this week to correct this issue.

Best regards
Matthias