[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Line Keys in FW 81
Author Message
Alexander2 Offline
Junior Member
**

Posts: 13
Joined: Jan 2017
Reputation: 0
Post: #1
Line Keys in FW 81
Hello,
i think there is something wrong with the Linekeys in FW 28.81.0.20 ... after provisioning there are no descriptions in the Line-Fields... also the line Keys will appear after pressing them once...

As you can on the first picture - the device is fresh provisioned.

On the second pic i have pressed the first line key

On the third pic i have pressed the second line key..

How to enable the old view with the extension name in description on both line keys?

We are using a 3CX with default template settings.

Thanks for your help!


Attached File(s) Thumbnail(s)
           
01-19-2017 09:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,245
Joined: Jan 2014
Reputation: 36
Post: #2
RE: Line Keys in FW 81
Hi,

FW 28.81.0.x is not (yet) supported in 3CX v15 as you can see in the "Phones" tab.
Please use the by 3CX Supported firmware "28.80.0.130 - Yealink T46G FW: Added support for Lets Encrypt" and try again.

Hope this helps.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
01-19-2017 11:22 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Alexander2 Offline
Junior Member
**

Posts: 13
Joined: Jan 2017
Reputation: 0
Post: #3
RE: Line Keys in FW 81
(01-19-2017 11:22 AM)complex1 Wrote:  Hi,

FW 28.81.0.x is not (yet) supported in 3CX v15 as you can see in the "Phones" tab.
Please use the by 3CX Supported firmware "28.80.0.130 - Yealink T46G FW: Added support for Lets Encrypt" and try again.

Hope this helps.

Hello,
thx for your reply! I have over 60 phones here... i cannot downgrade every phone by hand... any solution for this? Can i definie a FW in the provisioning tmpl to downgrade them automaticly?
01-19-2017 12:06 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,245
Joined: Jan 2014
Reputation: 36
Post: #4
RE: Line Keys in FW 81
Quote:Can i definie a FW in the provisioning tmpl to downgrade them automaticly?

Hi,

You may modify the template but then it is still one after the other and not all at once.
Every device has his own and unique MAC- and/or IP-address, that’s why.

I suggest first downgrade them to .125 with the firmware found on the Yealink side, then upgrade to .130 from 3CX PBX.
Don’t forget to reset every phone to factory default to prevent strange behaviour of the phones caused by the upgrade.

Before you start this downgrade/upgrade process for all 60+ phones, I suggest to try this for only one phone and check if it will solve your issue.

Hope this helps.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
01-19-2017 12:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Alexander2 Offline
Junior Member
**

Posts: 13
Joined: Jan 2017
Reputation: 0
Post: #5
RE: Line Keys in FW 81
Sorry i don't have the time to manually downgrade more than 60 phones... i will provision the phone with the FW 81 ... and with buggy Line-Keys.... i cannot understand why there is no option to define the FW via server... but thx for your help
01-20-2017 08:00 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Fraukas2 Offline
Kolibri Telecommunication
**

Posts: 38
Joined: Jan 2017
Reputation: 0
Post: #6
RE: Line Keys in FW 81
Just place something like this in your general T46G autoprovision template.
Code:
firmware.url=http://<user>:<pass>@<domain>/prov/28.81.0.130.rom

I'm not 100% certain it will work since it is 3CX. But worth a shot.
(This post was last modified: 01-21-2017 01:55 AM by Fraukas2.)
01-21-2017 01:51 AM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Alexander2 Offline
Junior Member
**

Posts: 13
Joined: Jan 2017
Reputation: 0
Post: #7
RE: Line Keys in FW 81
(01-21-2017 01:51 AM)François1 Wrote:  Just place something like this in your general T46G autoprovision template.
Code:
firmware.url=http://<user>:<pass>@<domain>/prov/28.81.0.130.rom

I'm not 100% certain it will work since it is 3CX. But worth a shot.

thanks for your help. But this is already implemented by 3CX:


{IF network=LOCALLAN}
firmware.url = %%PROVLINKLOCAL%%/firmware/yealink/%%firmware%%
{ELSE}
firmware.url = %%PROVLINK%%/firmware/yealink/%%firmware%%
{ENDIF}

So the telefon does upgrade automatically ... but it does not downgrade to the version wich is supported by the server..
01-23-2017 10:42 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #8
RE: Line Keys in FW 81
(01-19-2017 09:52 AM)Alexander2 Wrote:  Hello,
i think there is something wrong with the Linekeys in FW 28.81.0.20 ... after provisioning there are no descriptions in the Line-Fields... also the line Keys will appear after pressing them once...

As you can on the first picture - the device is fresh provisioned.

On the second pic i have pressed the first line key

On the third pic i have pressed the second line key..

How to enable the old view with the extension name in description on both line keys?

We are using a 3CX with default template settings.

Thanks for your help!

3cx is currently supporting 28.80.0.130 and not 28.81.0.20.

How did your phones even get to that version? New in box?

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
(This post was last modified: 01-23-2017 08:41 PM by CWR.)
01-23-2017 08:38 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T43-U incoming calls do not land on the correct line/button rtfm2022 7 908 05-12-2022 05:41 PM
Last Post: rtfm2022
  LCD DSS keys displays large buttons over date / time xuan69 2 2,020 11-03-2021 06:57 PM
Last Post: xuan69
  Line Key6-10 Greyd Out - T46G redmondsau 0 2,124 10-02-2020 07:38 AM
Last Post: redmondsau
  Line Key LED vs BLF LED? uberdome 0 2,186 11-01-2019 08:46 PM
Last Post: uberdome
  T42S do not display icon in YealinkIPPhoneStatus line oliv 2 4,425 08-26-2019 06:15 AM
Last Post: oliv
  Configure DSS keys via DECT rubberducky 1 3,655 06-10-2019 02:09 PM
Last Post: jolouis
  DSS Keys T48S Dario 0 2,617 09-27-2018 10:07 AM
Last Post: Dario
  T46G - Line Call Forwarding to External # David R 1 3,873 08-17-2018 02:38 PM
Last Post: jolouis
  Select available line nick.spannagel 1 3,758 06-07-2018 11:59 AM
Last Post: Jensen_Yealink
  T48S Line appearance indicator malfunctioning Jeffrey101380 1 4,303 05-30-2018 12:05 PM
Last Post: Kevin_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication