[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[W52P+W56P] Same base station with with different handset models - Auto-provisioning
Author Message
Asanka Offline
Junior Member
**

Posts: 18
Joined: Jun 2015
Reputation: 0
Post: #1
[W52P+W56P] Same base station with with different handset models - Auto-provisioning
Hi Guys,

Just have a quick question. We've situation where we're in a mixed device deployment. We've got W52Ps and W56Ps all in one location.

As both models use the same base and basefiles, what is the process upgrading firmware for each type of handset model?

Ideally i would not want to add the firmware URL to each MAC-file as it would mean that there are more places to keep track of when it comes to maintenance.

Regards

AsankG
Corp VoIP
[Image: Exetel-Logo.png]
01-16-2017 10:39 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #2
RE: Same base station with with different handset models - Auto-provisioning
Dear Sir,

Do you mean you want to upgrade the handset firmware of W52 and W56 in the same time, right?

In the wui, we can only upgrade W52H or W56H in one time. But we can use the parameter 'over_the_air.url' via auto provision to update the firmware at the same time. Please see the detail below:

1.upload the firmware of W52H and W56H, in my side,26.73.0.10 is for W52H,61.80.0.1 is for W56H

2.configure a cfg1 file, add this parameter in cfg1 file:
#!version:1.0.0.1

over_the_air.url = http://10.2.2.21:8099/26.73.0.10.rom

auto_provision.server.url = http://10.2.2.21:8099/cfg2.cfg


3.configure a cfg2 file, add this parameter in cfg2 file:
#!version:1.0.0.1

over_the_air.url = http://10.2.2.21:8099/61.80.0.1.rom

4. add the auto provision URL in server URL(in mt test, it is http://10.2.2.21:8099/cfg1.cfg) via web interface.
click on auto provision now, it will ask for the auto provision server, and download cfg1 file, upgrade W52H to 26.73.0.10, and it also ask for another provision server URL.

5.in this test,firstly,W52H will upgrade to 26.73.0.10, and base will obtain the second provision server URL after upgrading, and it will download cfg2 file, upgrade W56H to 61.80.0.1
then all is done. it may spend some time to upgrade. So we use a nested auto provision way to access it.

You can refer to the picture below:
   
   
01-17-2017 07:01 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Asanka Offline
Junior Member
**

Posts: 18
Joined: Jun 2015
Reputation: 0
Post: #3
RE: [W52P+W56P] Same base station with with different handset models - AutoProv
Hi Lucia,

Thanks for this. But i don't think this would work in a situation where a 52H and 56H gets connected to the same base. Also even if it's two different bases, firmware details are stored in the base file which would be the same file as the the bases are identical for the devices.

My suggestion is that in the next firmware update for the base, create a new OTA URL like below so that we can deploy the correct handset firmware according to the handset.

over_the_air.url.w52h = http://path_to_w52h_frimware/w52h-latest.rom
over_the_air.url.w56h = http://path_to_w56h_frimware/w56h-latest.rom

This would allow for customers with mixed deployment an easy way of updating firmware.

AsankG
Corp VoIP
[Image: Exetel-Logo.png]
05-05-2017 01:04 AM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Asanka Offline
Junior Member
**

Posts: 18
Joined: Jun 2015
Reputation: 0
Post: #4
RE: [W52P+W56P] Same base station with with different handset models - AutoP
Hi Lucia,

Thanks for this. But i don't think this would work in a situation where a 52H and 56H gets connected to the same base. Also even if it's two different bases, firmware details are stored in the base file which would be the same file as the the bases are identical for the devices.

My suggestion is that in the next firmware update for the base, create a new OTA URL like below so that we can deploy the correct handset firmware according to the handset.

over_the_air.url.w52h =path_to_w52h_frimware
over_the_air.url.w56h = path_to_w56h_frimware

This would allow for customers with mixed deployment an easy way of updating firmware.

AsankG
Corp VoIP
[Image: Exetel-Logo.png]
05-05-2017 01:05 AM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #5
RE: [W52P+W56P] Same base station with different handset models - Auto-provisioning
Yes, thank you for your suggest.

We have already add the parameter before in V81:
over_the_air.url.w52h =
over_the_air.url.w56h =

Regards
Lucia
05-05-2017 01:12 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
SteveDavies Offline
Junior Member
**

Posts: 3
Joined: Aug 2017
Reputation: 0
Post: #6
RE: [W52P+W56P] Same base station with different handset models - Auto-provisioning
(05-05-2017 01:12 AM)Lucia Wrote:  Yes, thank you for your suggest.

We have already add the parameter before in V81:
over_the_air.url.w52h =
over_the_air.url.w56h =

Regards
Lucia

Hi Lucia,

I have seen W56P v.81 base firmware mentioned a couple of times since the start for this year (2017) but still cannot see anywhere to download it. Is it possible to have a beta release to test in our office?

Thanks,
Steve
08-25-2017 02:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  w53H how to set up the hedset to reconect base with the best signal autoprimer 0 212 12-27-2021 02:36 PM
Last Post: autoprimer
  Deregister w56H without old base. digiaustin 1 2,702 08-01-2021 05:39 PM
Last Post: Phil2021
Tongue W52P Connectivity problems "out of range" or "synchronizing" gadget 5 14,087 12-11-2018 08:40 AM
Last Post: complex1
  T19P E2 auto provision firmware. NI 1 4,608 10-08-2018 05:15 PM
Last Post: NI
  Firmware upgrade with provisioning url(relative) arvind.zapp 10 20,265 05-12-2017 06:01 AM
Last Post: Asanka
  cannot disable auto provisioning W52P - W56H Babaloo71 5 11,493 02-21-2017 06:59 AM
Last Post: Karl_Yealink
  T29G v81 Provisioning w/ Encryption fastdevice 4 7,225 01-16-2017 12:09 PM
Last Post: Lucia_Yealink
Bug [W52P] SIP CANCEL with "Call completed elsewhere" shows missed call x0r 7 22,904 12-08-2016 08:00 AM
Last Post: smiso
  W52P headset capabilities jgreer 2 8,891 06-24-2016 02:25 AM
Last Post: gadget
  W52P Crashing (memory leak?) damo@launtel.net.au 7 14,495 05-31-2016 10:39 AM
Last Post: damo@launtel.net.au

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication