[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Problem with Dial tone > Beep Beep
Author Message
Cloud Communications Offline
Junior Member
**

Posts: 7
Joined: Nov 2013
Reputation: 0
Post: #1
Problem with Dial tone > Beep Beep
Hi,

Im using an Asterisk PBX.

When calling internally to an extension with a SNOM phone, the dial tone is correct.
When I call with a Yealink phone (T4X) the dial tone stops after 3seconds and changes into a 'Beep Beep'

I already tried:
Subscribe MWI To Voice Mail - Disabled
Voice Mail Tone - Disabled
Tones > Select Country > Custom > Stutter - 0

Can anyway help? Can't solve this issue for days.

Thanks a lot!
01-09-2017 08:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Travis_Yealink Offline
Super Moderator
******

Posts: 171
Joined: Mar 2016
Reputation: 1
Post: #2
RE: Problem with Dial tone > Beep Beep
(01-09-2017 08:58 PM)Cloud Communications Wrote:  Hi,

Im using an Asterisk PBX.

When calling internally to an extension with a SNOM phone, the dial tone is correct.
When I call with a Yealink phone (T4X) the dial tone stops after 3seconds and changes into a 'Beep Beep'

I already tried:
Subscribe MWI To Voice Mail - Disabled
Voice Mail Tone - Disabled
Tones > Select Country > Custom > Stutter - 0

Can anyway help? Can't solve this issue for days.

Thanks a lot!

Hi,

For this issue, suggest you:
1. Reset the phone to factory(long press the OK key for 5s) and test again
2. switch the account to see if the issue was the server side
3. if the issue only with Yealink phone, please tell me besides the beep beep, did the call established normally?
Please kindly collect trace files to me also:
a. Level 6 syslog
b. PCAP trace
c. Config.bin
You can get the guide from this link to see how to export the issue data:
http://support.yealink.com/faq/faqInfo?id=311

regards
Travis
01-11-2017 09:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Cloud Communications Offline
Junior Member
**

Posts: 7
Joined: Nov 2013
Reputation: 0
Post: #3
RE: Problem with Dial tone > Beep Beep
(01-11-2017 09:49 AM)Travis Wrote:  
(01-09-2017 08:58 PM)Cloud Communications Wrote:  Hi,

Im using an Asterisk PBX.

When calling internally to an extension with a SNOM phone, the dial tone is correct.
When I call with a Yealink phone (T4X) the dial tone stops after 3seconds and changes into a 'Beep Beep'

I already tried:
Subscribe MWI To Voice Mail - Disabled
Voice Mail Tone - Disabled
Tones > Select Country > Custom > Stutter - 0

Can anyway help? Can't solve this issue for days.

Thanks a lot!

Hi,

For this issue, suggest you:
1. Reset the phone to factory(long press the OK key for 5s) and test again
2. switch the account to see if the issue was the server side
3. if the issue only with Yealink phone, please tell me besides the beep beep, did the call established normally?
Please kindly collect trace files to me also:
a. Level 6 syslog
b. PCAP trace
c. Config.bin
You can get the guide from this link to see how to export the issue data:
http://support.yealink.com/faq/faqInfo?id=311

regards
Travis


Hi Travis,

Thank you for your reply.

1a. Already did a factory reset, and tested this out with only the account + BLF's filled in.
1b. It's on more devices, not only 1 Yealink.

2. Tested with more extensions. when we swap the extension to a SNOM phone, the issue disappears. The problem is also an other Yealinks with other extensions.

3. there is no problem with the connected line / voice quality is fine. The only thing that disappears is the dial tone after a few seconds replaced by: beep beep---silence for 5seconds---beep beep---...

a.
.pcap  28.81.0.15_11_11_6.pcap (Size: 123.55 KB / Downloads: 1)
b.
.bin  dgdm_config.bin (Size: 332.52 KB / Downloads: 1)
c.
.zip  dgdm.zip (Size: 198.13 KB / Downloads: 1)

Thank you for helping me out.

KR,
01-11-2017 10:22 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Travis_Yealink Offline
Super Moderator
******

Posts: 171
Joined: Mar 2016
Reputation: 1
Post: #4
RE: Problem with Dial tone > Beep Beep
(01-11-2017 10:22 AM)Cloud Communications Wrote:  
(01-11-2017 09:49 AM)Travis Wrote:  
(01-09-2017 08:58 PM)Cloud Communications Wrote:  Hi,

Im using an Asterisk PBX.

When calling internally to an extension with a SNOM phone, the dial tone is correct.
When I call with a Yealink phone (T4X) the dial tone stops after 3seconds and changes into a 'Beep Beep'

I already tried:
Subscribe MWI To Voice Mail - Disabled
Voice Mail Tone - Disabled
Tones > Select Country > Custom > Stutter - 0

Can anyway help? Can't solve this issue for days.

Thanks a lot!

Hi,

For this issue, suggest you:
1. Reset the phone to factory(long press the OK key for 5s) and test again
2. switch the account to see if the issue was the server side
3. if the issue only with Yealink phone, please tell me besides the beep beep, did the call established normally?
Please kindly collect trace files to me also:
a. Level 6 syslog
b. PCAP trace
c. Config.bin
You can get the guide from this link to see how to export the issue data:
http://support.yealink.com/faq/faqInfo?id=311

regards
Travis


Hi Travis,

Thank you for your reply.

1a. Already did a factory reset, and tested this out with only the account + BLF's filled in.
1b. It's on more devices, not only 1 Yealink.

2. Tested with more extensions. when we swap the extension to a SNOM phone, the issue disappears. The problem is also an other Yealinks with other extensions.

3. there is no problem with the connected line / voice quality is fine. The only thing that disappears is the dial tone after a few seconds replaced by: beep beep---silence for 5seconds---beep beep---...

a.
b.
c.

Thank you for helping me out.

KR,

Hi,

I've submitted the case to our R&D team, will keep you posted.
By the way, may I know how many Yealink phones do you have in total?

regards
Travis
01-13-2017 07:45 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Cloud Communications Offline
Junior Member
**

Posts: 7
Joined: Nov 2013
Reputation: 0
Post: #5
RE: Problem with Dial tone > Beep Beep
(01-13-2017 07:45 AM)Travis Wrote:  
(01-11-2017 10:22 AM)Cloud Communications Wrote:  
(01-11-2017 09:49 AM)Travis Wrote:  
(01-09-2017 08:58 PM)Cloud Communications Wrote:  Hi,

Im using an Asterisk PBX.

When calling internally to an extension with a SNOM phone, the dial tone is correct.
When I call with a Yealink phone (T4X) the dial tone stops after 3seconds and changes into a 'Beep Beep'

I already tried:
Subscribe MWI To Voice Mail - Disabled
Voice Mail Tone - Disabled
Tones > Select Country > Custom > Stutter - 0

Can anyway help? Can't solve this issue for days.

Thanks a lot!

Hi,

For this issue, suggest you:
1. Reset the phone to factory(long press the OK key for 5s) and test again
2. switch the account to see if the issue was the server side
3. if the issue only with Yealink phone, please tell me besides the beep beep, did the call established normally?
Please kindly collect trace files to me also:
a. Level 6 syslog
b. PCAP trace
c. Config.bin
You can get the guide from this link to see how to export the issue data:
http://support.yealink.com/faq/faqInfo?id=311

regards
Travis


Hi Travis,

Thank you for your reply.

1a. Already did a factory reset, and tested this out with only the account + BLF's filled in.
1b. It's on more devices, not only 1 Yealink.

2. Tested with more extensions. when we swap the extension to a SNOM phone, the issue disappears. The problem is also an other Yealinks with other extensions.

3. there is no problem with the connected line / voice quality is fine. The only thing that disappears is the dial tone after a few seconds replaced by: beep beep---silence for 5seconds---beep beep---...

a.
b.
c.

Thank you for helping me out.

KR,

Hi,

I've submitted the case to our R&D team, will keep you posted.
By the way, may I know how many Yealink phones do you have in total?

regards
Travis

Hi Travis,

Thanks for keeping me posted.

Our firm has +XXXX Yealink devices active.
Regarding the customer, where we see the issue there are +/- 20 Yealink Phones.
At the moment we see this issue as well with other customers.
01-13-2017 08:12 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Travis_Yealink Offline
Super Moderator
******

Posts: 171
Joined: Mar 2016
Reputation: 1
Post: #6
RE: Problem with Dial tone > Beep Beep
(01-13-2017 08:12 AM)Cloud Communications Wrote:  
(01-13-2017 07:45 AM)Travis Wrote:  
(01-11-2017 10:22 AM)Cloud Communications Wrote:  
(01-11-2017 09:49 AM)Travis Wrote:  
(01-09-2017 08:58 PM)Cloud Communications Wrote:  Hi,

Im using an Asterisk PBX.

When calling internally to an extension with a SNOM phone, the dial tone is correct.
When I call with a Yealink phone (T4X) the dial tone stops after 3seconds and changes into a 'Beep Beep'

I already tried:
Subscribe MWI To Voice Mail - Disabled
Voice Mail Tone - Disabled
Tones > Select Country > Custom > Stutter - 0

Can anyway help? Can't solve this issue for days.

Thanks a lot!

Hi,

For this issue, suggest you:
1. Reset the phone to factory(long press the OK key for 5s) and test again
2. switch the account to see if the issue was the server side
3. if the issue only with Yealink phone, please tell me besides the beep beep, did the call established normally?
Please kindly collect trace files to me also:
a. Level 6 syslog
b. PCAP trace
c. Config.bin
You can get the guide from this link to see how to export the issue data:
http://support.yealink.com/faq/faqInfo?id=311

regards
Travis


Hi Travis,

Thank you for your reply.

1a. Already did a factory reset, and tested this out with only the account + BLF's filled in.
1b. It's on more devices, not only 1 Yealink.

2. Tested with more extensions. when we swap the extension to a SNOM phone, the issue disappears. The problem is also an other Yealinks with other extensions.

3. there is no problem with the connected line / voice quality is fine. The only thing that disappears is the dial tone after a few seconds replaced by: beep beep---silence for 5seconds---beep beep---...

a.
b.
c.

Thank you for helping me out.

KR,

Hi,

I've submitted the case to our R&D team, will keep you posted.
By the way, may I know how many Yealink phones do you have in total?

regards
Travis

Hi Travis,

Thanks for keeping me posted.

Our firm has +XXXX Yealink devices active.
Regarding the customer, where we see the issue there are +/- 20 Yealink Phones.
At the moment we see this issue as well with other customers.


Hi,

Suggestion from our R&D team:
Please go to web interface, Features-->General information--> 180 Ring Workaround, and disable this option.

Wait for your update.

Regards
Travis
01-16-2017 01:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Cloud Communications Offline
Junior Member
**

Posts: 7
Joined: Nov 2013
Reputation: 0
Post: #7
RE: Problem with Dial tone > Beep Beep
(01-16-2017 01:19 AM)Travis Wrote:  
(01-13-2017 08:12 AM)Cloud Communications Wrote:  
(01-13-2017 07:45 AM)Travis Wrote:  
(01-11-2017 10:22 AM)Cloud Communications Wrote:  
(01-11-2017 09:49 AM)Travis Wrote:  Hi,

For this issue, suggest you:
1. Reset the phone to factory(long press the OK key for 5s) and test again
2. switch the account to see if the issue was the server side
3. if the issue only with Yealink phone, please tell me besides the beep beep, did the call established normally?
Please kindly collect trace files to me also:
a. Level 6 syslog
b. PCAP trace
c. Config.bin
You can get the guide from this link to see how to export the issue data:
http://support.yealink.com/faq/faqInfo?id=311

regards
Travis


Hi Travis,

Thank you for your reply.

1a. Already did a factory reset, and tested this out with only the account + BLF's filled in.
1b. It's on more devices, not only 1 Yealink.

2. Tested with more extensions. when we swap the extension to a SNOM phone, the issue disappears. The problem is also an other Yealinks with other extensions.

3. there is no problem with the connected line / voice quality is fine. The only thing that disappears is the dial tone after a few seconds replaced by: beep beep---silence for 5seconds---beep beep---...

a.
b.
c.

Thank you for helping me out.

KR,

Hi,

I've submitted the case to our R&D team, will keep you posted.
By the way, may I know how many Yealink phones do you have in total?

regards
Travis

Hi Travis,

Thanks for keeping me posted.

Our firm has +XXXX Yealink devices active.
Regarding the customer, where we see the issue there are +/- 20 Yealink Phones.
At the moment we see this issue as well with other customers.


Hi,

Suggestion from our R&D team:
Please go to web interface, Features-->General information--> 180 Ring Workaround, and disable this option.

Wait for your update.

Regards
Travis
Hi Travis,

Thank you for your reply!

Changing the feature (180 Ring Workaround) doesn't fix the issue.

Note:
When I set Message '0' (Settings > Tones > Message '0') the "beep beep" disappears, but there is also no dial tone any more (just silent).

Thank you for helping us out!
01-16-2017 05:41 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Cloud Communications Offline
Junior Member
**

Posts: 7
Joined: Nov 2013
Reputation: 0
Post: #8
RE: Problem with Dial tone > Beep Beep
(01-16-2017 05:41 AM)Cloud Communications Wrote:  
(01-16-2017 01:19 AM)Travis Wrote:  
(01-13-2017 08:12 AM)Cloud Communications Wrote:  
(01-13-2017 07:45 AM)Travis Wrote:  
(01-11-2017 10:22 AM)Cloud Communications Wrote:  Hi Travis,

Thank you for your reply.

1a. Already did a factory reset, and tested this out with only the account + BLF's filled in.
1b. It's on more devices, not only 1 Yealink.

2. Tested with more extensions. when we swap the extension to a SNOM phone, the issue disappears. The problem is also an other Yealinks with other extensions.

3. there is no problem with the connected line / voice quality is fine. The only thing that disappears is the dial tone after a few seconds replaced by: beep beep---silence for 5seconds---beep beep---...

a.
b.
c.

Thank you for helping me out.

KR,

Hi,

I've submitted the case to our R&D team, will keep you posted.
By the way, may I know how many Yealink phones do you have in total?

regards
Travis

Hi Travis,

Thanks for keeping me posted.

Our firm has +XXXX Yealink devices active.
Regarding the customer, where we see the issue there are +/- 20 Yealink Phones.
At the moment we see this issue as well with other customers.


Hi,

Suggestion from our R&D team:
Please go to web interface, Features-->General information--> 180 Ring Workaround, and disable this option.

Wait for your update.

Regards
Travis
Hi Travis,

Thank you for your reply!

Changing the feature (180 Ring Workaround) doesn't fix the issue.

Note:
When I set Message '0' (Settings > Tones > Message '0') the "beep beep" disappears, but there is also no dial tone any more (just silent).

Thank you for helping us out!

Hi Travis,

Do you already had feedback from the R&D-team?
Thanks alot.
01-19-2017 02:55 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Travis_Yealink Offline
Super Moderator
******

Posts: 171
Joined: Mar 2016
Reputation: 1
Post: #9
RE: Problem with Dial tone > Beep Beep
(01-19-2017 02:55 PM)Cloud Communications Wrote:  
(01-16-2017 05:41 AM)Cloud Communications Wrote:  
(01-16-2017 01:19 AM)Travis Wrote:  
(01-13-2017 08:12 AM)Cloud Communications Wrote:  
(01-13-2017 07:45 AM)Travis Wrote:  Hi,

I've submitted the case to our R&D team, will keep you posted.
By the way, may I know how many Yealink phones do you have in total?

regards
Travis

Hi Travis,

Thanks for keeping me posted.

Our firm has +XXXX Yealink devices active.
Regarding the customer, where we see the issue there are +/- 20 Yealink Phones.
At the moment we see this issue as well with other customers.


Hi,

Suggestion from our R&D team:
Please go to web interface, Features-->General information--> 180 Ring Workaround, and disable this option.

Wait for your update.

Regards
Travis
Hi Travis,

Thank you for your reply!

Changing the feature (180 Ring Workaround) doesn't fix the issue.

Note:
When I set Message '0' (Settings > Tones > Message '0') the "beep beep" disappears, but there is also no dial tone any more (just silent).

Thank you for helping us out!

Hi Travis,

Do you already had feedback from the R&D-team?
Thanks alot.

Hi,

I sent you a private message on 15th Jan, did you receive it?
Holiday Note: We will have Chinese New Year Holiday from Jan.23rd to Feb 3rd. During the period, Yealink office will be closed...

I will get back to you after we finish the holiday, sorry about that.
Hope your kind understanding.

Regards
Travis
01-22-2017 05:51 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Travis_Yealink Offline
Super Moderator
******

Posts: 171
Joined: Mar 2016
Reputation: 1
Post: #10
RE: Problem with Dial tone > Beep Beep
(01-22-2017 05:51 AM)Travis Wrote:  
(01-19-2017 02:55 PM)Cloud Communications Wrote:  
(01-16-2017 05:41 AM)Cloud Communications Wrote:  
(01-16-2017 01:19 AM)Travis Wrote:  
(01-13-2017 08:12 AM)Cloud Communications Wrote:  Hi Travis,

Thanks for keeping me posted.

Our firm has +XXXX Yealink devices active.
Regarding the customer, where we see the issue there are +/- 20 Yealink Phones.
At the moment we see this issue as well with other customers.


Hi,

Suggestion from our R&D team:
Please go to web interface, Features-->General information--> 180 Ring Workaround, and disable this option.

Wait for your update.

Regards
Travis
Hi Travis,

Thank you for your reply!

Changing the feature (180 Ring Workaround) doesn't fix the issue.

Note:
When I set Message '0' (Settings > Tones > Message '0') the "beep beep" disappears, but there is also no dial tone any more (just silent).

Thank you for helping us out!

Hi Travis,

Do you already had feedback from the R&D-team?
Thanks alot.

Hi,

I sent you a private message on 15th Jan, did you receive it?
Holiday Note: We will have Chinese New Year Holiday from Jan.23rd to Feb 3rd. During the period, Yealink office will be closed...

I will get back to you after we finish the holiday, sorry about that.
Hope your kind understanding.

Regards
Travis


Hi,

Sorry for late reply.

I just got feedback from our R&D team, and our engineer checked the trace files you provided, and found it's a known issue, with our new V81 firmware version x.81.0.40, the issue was fixed.

Please download from below link:
http://ftp.yealink.com/?ShareToken=7A3BB...F0313EC143

Regards
Travis
02-07-2017 04:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Call Waiting Beep glennbtn 0 436 12-18-2023 05:22 PM
Last Post: glennbtn
  Key pad speed dial FAILS from non-default account jseeley 1 982 09-08-2023 05:56 AM
Last Post: jseeley
  History Dial Back option number@ip Marcelve 1 1,117 08-18-2023 03:23 AM
Last Post: Marcelve
  Speed Dial to a specific phone? prestigefac 0 1,112 02-06-2023 12:11 AM
Last Post: prestigefac
  T4X no beep on intercom answer jcaruso 2 7,358 04-12-2022 04:46 AM
Last Post: JohnJ
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 6,481 01-14-2022 10:22 AM
Last Post: kumagera
  Creating Pause in Speed Dial on T42S tcodispot 1 4,485 12-16-2020 05:47 AM
Last Post: Yisroel_MongoTEL
Question Problem: LDAP search in v83 does not work as in v81 zonder 1 6,818 09-23-2020 06:33 AM
Last Post: proofy
  Intercom tone - make louder? imfloridaguy 7 18,022 09-22-2020 06:54 PM
Last Post: Nraphan
Information Increase intercom tone value support@thearcehouse.com 14 30,947 09-22-2020 06:52 PM
Last Post: Nraphan

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication