VPN config not loading T42G

[MarcM]

OpenVPN config file which was working with 29.73.0.50
does not load anymore in webgui with 29.80 or 29.81.
As a workaround downgrading, loading vpn.cnf file and upgrading again shows vpn active but on 1 of 2 phones. 50% failing.

[Lucia_Yealink]

Hi MarcM，

Do you mean you use the OpenVPN config file in 29.73.0.50, 50% failing?
And in 29.80 or 29.81, you can not load the file at all, right? Please check it for me. Thank you.

If you rebuild the OpenVPN.tar for 29.80 or 29.81. Can the phone load the file?
if not, please kindly provide the OpenVPN.tar file for us. And the level 6 syslog, config.bin and pace trace when the phone load the file fail for us to do more analysis.
You can send the files to Lucia@yealink.com.

About how to get the three files, please refer to the FAQ below:
http://support.yealink.com/faq/faqInfo?id=313

More info about OpenVPN, please refer to the guide:
http://download.support.yealink.com/down...V81_20.pdf

Thank you for your info in advanced.

[MarcM]

Firmware 29.81.0.25 loaded without any issue the same file.

For the record the file was produced by pfsense OpenVPN client export package (v1.3.6) using T38G(2) tar file format.

Thanks anyway