New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How do I know which entry to use version 81 in provisioning.
Author Message
Zbych Offline
Junior Member
**

Posts: 2
Joined: Nov 2016
Reputation: 0
Post: #1
How do I know which entry to use version 81 in provisioning.
How do I know which entry to use version 81.
I have a phone T21 E2 FV 52.81.0.25, HV 52.0.0.0.0.0.0
Documentation Yealink_SIP-T2_Series_T19(P) E2_T4_Series_IP_Phones_Administrator_Guide_V81_20.pdf given that, for example: static.directory_setting.url = . Meanwhile, the phone recognizes only the entry: directory_setting.url
01-05-2017 08:48 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 470
Joined: Aug 2016
Reputation: 4
Post: #2
RE: How do I know which entry to use version 81 in provisioning.
Dear Sir,

Yes,in V81, the parameter is: "static.directory_setting.url=". But it can also recognizes the parameter:"directory_setting.url= "

Please make sure the auto provision file is correct.
About how to do auto provision, please refer to the guide below:

http://download.support.yealink.com/down...V81_20.pdf

Any question, please let me know.

Regards
01-06-2017 11:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Zbych Offline
Junior Member
**

Posts: 2
Joined: Nov 2016
Reputation: 0
Post: #3
RE: How do I know which entry to use version 81 in provisioning.
I want to achieve such an effect as in the Annex.
What should then enter in my phone, would phone wanted to read static.directory_setting.url.
With entries like this does not work:

y000000000000.boot:
#!version:1.0.0.1
## The header above must appear as-is in the first line
include:config <y000000000052.cfg>
overwrite_mode = 0

y000000000052.cfg:
#!version:1.0.0.1

##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##

################################################################################​#######
## Autop URL ##
################################################################################​#######
static.auto_provision.server.url = http://172.30.10.239/Http-ser/
static.auto_provision.server.username =
static.auto_provision.server.password =

################################################################################​#######
## Contact ##
################################################################################​#######
ocal_contact.data_photo_tar.url =

###(Except T20P Model)
static.directory_setting.url = http://172.30.10.239/Http-ser/XML/favori...etting.xml


favorite_setting.xml:
<root_favorite_set>
<item id_name="localdirectory" display_name="Local Directory" priority="1" enable="1" dev="common"/>
<item id_name="history" display_name="History" priority="2" enable="0" dev="common"/>
<item id_name="networkcalllog" display_name="Network CallLog" priority="3" enable="0" dev="common"/>
<item id_name="remotedirectory" display_name="Remote Phone Book" priority="4" enable="1" dev="common"/>
<item id_name="ldap" display_name="LDAP" priority="5" enable="0" dev="T21 T23 T40 T27 T27G T29 T41 T42 T42S T41S T46 T46S T48 T48S T49 T61 T66 T69 T69S"/>
<item id_name="broadsoftdirectory" display_name="Network Directories" priority="6" enable="0" dev="common"/>
</root_favorite_set>


Attached File(s) Thumbnail(s)
   
01-09-2017 08:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 470
Joined: Aug 2016
Reputation: 4
Post: #4
RE: How do I know which entry to use version 81 in provisioning.
Dear Sir,

Thank you for your detail info.

After checked the parameters you describe, it is correct for the phone.

Can you kindly provide the level 6 syslog, config.bin and pace trace when you do auto provision, so that we can locate the problem. Thank you.
About how to get the three files, please refer to the FAQ below:
http://support.yealink.com/faq/faqInfo?id=313

Please also provide the directory .xml file to me.You can send it to Lucia@yealink.com.

Beside, please check for me if you use the parameter "directory_setting.url " to do provision, can it work well?

Thank you for your info in advanced.
01-09-2017 08:50 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 470
Joined: Aug 2016
Reputation: 4
Post: #5
RE: How do I know which entry to use version 81 in provisioning.
Sorry for my late reply.

And I have done a test with your configuration and found you are right. The parameter “static.directory_setting.url” can not be recognized by the phone.

Suggest to use the parameter “directory_setting.url=” to do auto provision. And I will feedback this issue to our R&D and PD to modify it.
Thank you for your concern about this.
01-12-2017 06:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Set PC port link to 1Gb from provisioning file avayax 1 74 09-10-2019 03:30 PM
Last Post: complex1
  Remote Phonebook XML version, http(s) ssstofff 1 1,143 12-10-2018 07:25 AM
Last Post: ssstofff
  Firmware url version variables possible? rromano 1 918 08-22-2018 05:28 PM
Last Post: johnkiniston
  Get Phone Firmware version remotely nachete 0 1,594 07-10-2017 12:01 PM
Last Post: nachete
  Provisioning Chadsuperb 4 4,218 07-06-2017 03:37 PM
Last Post: complex1
  Phones always reboot when applying new config via provisioning avayax 3 4,837 12-15-2016 01:55 PM
Last Post: jolouis
  Phone provisioning: Display message on screen KNERD 2 3,249 12-05-2016 03:54 PM
Last Post: KNERD
  Recommendation provisioning kychifre 2 2,741 06-30-2015 06:38 PM
Last Post: kychifre
  CP860 - Re-provisioning redirects page tsukraw 3 4,984 03-05-2015 10:33 AM
Last Post: James_Yealink
  Where's firmwware version v73? jayw654 6 5,422 11-24-2014 01:37 PM
Last Post: James_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication