New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T29G Park Calls
Author Message
Pettis Offline
Junior Member
**

Posts: 6
Joined: Dec 2016
Reputation: 0
Post: #1
T29G Park Calls
So at the company I work at we are pushing out 46's 48's and 49's, however I am using a T29G. I have been reading on documentation of the phones and been experimenting on my Yealink. I have ran into a snag.

We have three reserved parks; 1001 1002 and 1003. I have made some key's set to park call at those reserved parks. My phone can park a call and it can see that a call is parked.

But when I go to pick up a parked call it says, "The number you have entered has not been recognized. Please try again." My boss's 48 picks and parks calls as expected.

Has anyone one of you had this problem?
(This post was last modified: 12-22-2016 10:18 PM by Pettis.)
12-22-2016 10:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
atdjr Offline
Junior Member
**

Posts: 7
Joined: Feb 2014
Reputation: 0
Post: #2
RE: T29G Park Calls
Maybe you need to perform a firmware upgrade is one is available for that model....Just a thought
12-23-2016 12:26 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Pettis Offline
Junior Member
**

Posts: 6
Joined: Dec 2016
Reputation: 0
Post: #3
RE: T29G Park Calls
(12-23-2016 12:26 AM)atdjr Wrote:  Maybe you need to perform a firmware upgrade is one is available for that model....Just a thought

Unfortunately it does have the latest firmware: 46.81.0.25
12-23-2016 12:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jensen_Yealink Offline
Administrator
*******

Posts: 98
Joined: Jan 2012
Reputation: 0
Post: #4
RE: T29G Park Calls
Hi Pettis,

Nice to know you via mail. i would like to know some detail, so i can help more on this:
1/ could you please share the detail process how you park the call and how you pick up(it should be retrieve) the parked call? what characters you have type in while retrieve.
2/ the call was park on T29G, and the parked call can't retrieve from the same T29G, but it can retrieve from T48G?
3/ can the T29G retrieve the other parked call?
4/ all the accounts on the same group?
please also kindly share other details.
12-23-2016 04:55 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Pettis Offline
Junior Member
**

Posts: 6
Joined: Dec 2016
Reputation: 0
Post: #5
RE: T29G Park Calls
(12-23-2016 04:55 AM)Jensen Wrote:  Hi Pettis,

Nice to know you via mail. i would like to know some detail, so i can help more on this:
1/ could you please share the detail process how you park the call and how you pick up(it should be retrieve) the parked call? what characters you have type in while retrieve.
2/ the call was park on T29G, and the parked call can't retrieve from the same T29G, but it can retrieve from T48G?
3/ can the T29G retrieve the other parked call?
4/ all the accounts on the same group?
please also kindly share other details.

Hi Jensen! I attached the DSSKey scrnsht to show you how I would like for the call park to work.

My boss's phone works but he has the T48G and his options actually say "enhanced call park."

We are all on the same group. I can't dial the extensions or press the parked spot to pick up the call. But my phone see's when a car is parked and can park a call.


Attached File(s) Thumbnail(s)
   
12-27-2016 07:18 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jensen_Yealink Offline
Administrator
*******

Posts: 98
Joined: Jan 2012
Reputation: 0
Post: #6
RE: T29G Park Calls
Hi Pettis,

Yealink IP phones support call park feature under the following modes:
 FAC mode (dial the call park code to park the call to desired or local extension)
 Transfer mode (park the call to directional parking lot directly)
from your screenshot, you are using the transfer mode i think. So the DSS key to retrieve should be Code+reserved park port.
the detail can refer to below admin guide from P494 to P506:
http://download.support.yealink.com/down...V81_20.pdf
12-29-2016 05:29 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Pettis Offline
Junior Member
**

Posts: 6
Joined: Dec 2016
Reputation: 0
Post: #7
RE: T29G Park Calls
(12-29-2016 05:29 AM)Jensen Wrote:  Hi Pettis,

Yealink IP phones support call park feature under the following modes:
 FAC mode (dial the call park code to park the call to desired or local extension)
 Transfer mode (park the call to directional parking lot directly)
from your screenshot, you are using the transfer mode i think. So the DSS key to retrieve should be Code+reserved park port.
the detail can refer to below admin guide from P494 to P506:
http://download.support.yealink.com/down...V81_20.pdf

I am not sure exactly what you mean, but I have tried numerous configurations and it just seems that this phone doesn't want to pick up the extensions 1001 1002 1003.

Also I was using FAC mode.
(This post was last modified: 12-29-2016 05:07 PM by Pettis.)
12-29-2016 04:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jensen_Yealink Offline
Administrator
*******

Posts: 98
Joined: Jan 2012
Reputation: 0
Post: #8
RE: T29G Park Calls
Hi Pettis,

Could you share the detail how the "enhanced call park." configured on the T48G that works well on your Boss side? while the T48G retrieve the parked call, what is the prompt on the LCD? what is the operational process?
If your server side support FAC mode, then you need to type in the FAC code and the extension, for example, the retrieve FAC code is *88, the call has been park to 1001, you need to type in: *881001.
12-30-2016 01:43 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T29 Park reminder brandywine 4 2,820 08-20-2019 05:20 AM
Last Post: kapetrosyan
  T29G BLF Keys going dark rjhartman68 0 360 04-10-2019 02:59 PM
Last Post: rjhartman68
  BLF and Call Park on T29G pureit 0 356 04-02-2019 01:36 AM
Last Post: pureit
  T29G DTMF Duration mightychrisgill 1 664 02-04-2019 12:50 PM
Last Post: complex1
  T29G Remote Phonebook no lookup for incoming call Chris708 1 1,977 07-16-2018 03:15 PM
Last Post: Chris708
  T29G doesn't work Sam54 1 1,412 05-09-2018 02:04 AM
Last Post: Travis_Yealink
  T29G - Not Authorized to access the web interface shifa 2 3,602 05-04-2018 12:30 AM
Last Post: shifa
  T29G Registration failed Roshtech 1 1,443 01-29-2018 05:37 AM
Last Post: Evan_Yealink
  Automatic message display on T29G yc12843 2 1,877 01-25-2018 08:58 PM
Last Post: yc12843
  T29G Opus Codec fastdevice 2 3,352 09-07-2017 04:05 PM
Last Post: oliv

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication