[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Call Transfer when Call is being held is broken
Author Message
c99hris Offline
Junior Member
**

Posts: 39
Joined: Aug 2015
Reputation: 0
Post: #1
Call Transfer when Call is being held is broken
Any T4x phone using firmware version 35.80.0.95

Call flow:
When I place a caller on hold, then press the BLF key for another user the call gets transferred automatically.
What I want to do is place a call on hold, call another user and say "joe is calling for you, can I transfer to you?" they would say either yes or no and based on the answer I could then transfer the call to the other extension. The way it is now I cannot put the call on hold to see if the other user can take the call.
My switch vendor Netsapiens is asking me to
"stop the device from sending a reefer when trying to page. "

Please help
Thanks
Chris
12-07-2016 12:07 AM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #2
RE: Call Transfer when Call is being held is broken
Hi Chris,

Please use the parameter below to do auto provision to solve this issue.
The parameter means when you press the DSS key during a call, it will do the operation that you configure:
transfer.dsskey_deal_type = 1
#0: New Call
#1: Attended Transfer
#2: Blind Transfer

Best Regards,
Lucia Lu
12-08-2016 10:33 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
c99hris Offline
Junior Member
**

Posts: 39
Joined: Aug 2015
Reputation: 0
Post: #3
RE: Call Transfer when Call is being held is broken
(12-08-2016 10:33 AM)Lucia Wrote:  Hi Chris,

Please use the parameter below to do auto provision to solve this issue.
The parameter means when you press the DSS key during a call, it will do the operation that you configure:
transfer.dsskey_deal_type = 1
#0: New Call
#1: Attended Transfer
#2: Blind Transfer

Best Regards,
Lucia Lu

I changed the setting to New Call and that solved the problem
Thanks
12-08-2016 02:50 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Call Waiting Beep glennbtn 0 434 12-18-2023 05:22 PM
Last Post: glennbtn
  Remove transfer dialog on T46S bsnipes 0 515 12-05-2023 04:44 AM
Last Post: bsnipes
  t46u , call waiting, ring sles 1 824 11-30-2023 05:29 AM
Last Post: msachs
  T48U BLF Park Call not working timotel 0 810 09-20-2023 07:20 AM
Last Post: timotel
  T48G Connected handset not answering or ending call with connected handset. Pettis 4 2,326 07-27-2023 05:38 AM
Last Post: Lissvazquez
  T43U T42S Call Park BLF robm 0 982 05-19-2023 12:16 AM
Last Post: robm
  Directed or group pickup call history softnetvoip 1 1,697 03-08-2023 10:53 PM
Last Post: softnetvoip
  Missed Call Does Not Appear in History bcmike 1 2,098 02-01-2023 05:07 AM
Last Post: complex1
  T46G call completed elsewhere zimbocz 3 10,020 10-28-2022 03:28 AM
Last Post: tredd1982
  Transfer error: Not Emergency Call tredd1982 0 1,904 10-28-2022 03:15 AM
Last Post: tredd1982

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication