[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W52P Reliability issues - Initializing data
Author Message
chrisdixon2 Offline
Junior Member
**

Posts: 4
Joined: Jan 2015
Reputation: 0
Post: #1
W52P Reliability issues - Initializing data
Dear All,

We have had the W52Ps for about 18 months now but never really got them working well. The Desktop handsets we use (T42G) all work fine so the problem is isolated to the cordless ones. We get the following issues:

1: The individual handsets will randomly have "Initializing data" on the screen
2: The base stations web interface will stop responding (monitored with Zabbix)
3: The handset cuts out saying it is 'busy'

Once you reboot the station and the handsets it all goes back to normal for a week or two, however the user can miss a call if they don't notice the phone has stopped working which is very poor in a customer service environment like ours.

We have 5 base stations and around 20 W52handsets all in constant use with no repeaters. Before these we had normal cordless phones with ATA adapters and they never had the same sort of issues (and were much cheaper). We have the latest firmware on all the handsets and bases.

Any help would be appretiated as I know this is not isolated to jsut us looking through the forum!

many thanks

Chris
(This post was last modified: 12-05-2016 09:52 AM by chrisdixon2.)
12-05-2016 09:50 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #2
RE: W52P Reliability issues - Initializing data
Hi Chris,

First of all, please reset all W52P base stations to factory default.
Then for test assign no more than 2 handsets to each base station.
Do not roam the handsets.
Test again and if results are positive add one (1) handset to each base station.
Test again and so on till the issue occurs.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
12-05-2016 02:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Elaine_Yealink Offline
Super Moderator
******

Posts: 152
Joined: Aug 2014
Reputation: 4
Post: #3
RE: W52P Reliability issues - Initializing data
Dear Chris,

Please have a test with following test version and see if issue repeats:

http://ftp.yealink.com/?ShareToken=4ACEF...27785FEF87
After upgrading, please export the syslog (level 6) to syslog server, and detect for 24 hours to see if issue repeats. If yes, please feedback with config.bin and syslog to Yealink support team.
For syslog server, we are using 3CDaemon if you don't have one.

At the mean time, please check and get information below
1.For Deployment and Firmware:
--1. How many base and handset are deployed in the space.
--2. How many hanset are connected to each base
--3. Would you mind sending pictures or diagram for the deployment on customer side
--4. Are their any other brand DECT phones are deployed in the same space
--5. Confirm the firmware version for all handsets and bases.
--6. What is the distance between handset and the base it registered to?
--7. What is the distance between each base?
--8. Are there any repeaters deployed on site? How many?
2.Issue symptoms and frequency
--1. How is the frequency for the problem? How many times per day?
--2. When dropping issue happens, after how long will the handset connect to base again?
--3. When dropping issue happens, if disconnect 1-2 base, will the situation become better?
--4. Is Eco mode on or off on each handset?
--5. Is PoE used or PSU?

Regards
Elaine
12-12-2016 06:14 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Elaine_Yealink Offline
Super Moderator
******

Posts: 152
Joined: Aug 2014
Reputation: 4
Post: #4
RE: W52P Reliability issues - Initializing data
Dear Chris,

We have some reports from customers that the above test version helps to fix the problem. Please have a test and let us know if it works for you. If not, please send the information to me. We will continue to troubleshoot.

Merry Christmas
Elaine
12-23-2016 01:46 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52P not working after change of broadband supplier Jasibansel 1 514 01-22-2024 07:15 PM
Last Post: complex1
  Random handset dropouts and "Initializing Data" YCMJamie 6 17,483 11-15-2023 01:25 AM
Last Post: stevem@norteccommunications.com
Sad W52P not picking up IP Burkni 4 4,161 09-19-2023 06:22 PM
Last Post: Burkni
  W56H with W52P Base dmvcomms 7 7,401 03-06-2023 04:39 PM
Last Post: poznaniak
  W73H handset with W52P problem reboot Paco Brufal 2 2,804 03-03-2023 01:21 AM
Last Post: nolto
  W52P Repeater RT10/rt20/RT30 schnell-yealink 3 8,653 04-20-2022 10:17 PM
Last Post: complex1
  W52P Firmware upgrade aunijaffer@gmail.com 5 12,337 09-07-2021 11:42 PM
Last Post: complex1
  W52P 2 handsets DAZZLING 1 6,946 06-01-2021 09:55 PM
Last Post: complex1
  W52P Openvpn with mikrotik info@quantiss.com 4 17,336 04-11-2021 06:25 AM
Last Post: Harms_Kubiak
  Is there no call history in web management panel in W52P? poznaniak 1 7,653 08-10-2020 12:49 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication