[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Speakerphone page (Intercom)
Author Message
fraukas
Unregistered

 
Post: #1
Speakerphone page (Intercom)
Hello guys !

I just installed a new client of mine who's used to use the function "Intercom" or "Page" to the whole company.
My VoIP server is on a modified Asterisk basis. The shortcut i did on the server for the Page to all of her extension is *399 that is going to page extensions 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249 and 250 (this is the setup for the extension 213).
When i use the Line key type "Intercom" with value *399, all the phones do beep but no sounds come out of the internal speaker.
Is there a maximum number of extensions that can be paged at the same time ?

I've got:
- 28x T23G on the firmware 44.80.0.95
- 3x T46G on the firmware 28.80.0.95
- 2x W52P on 25.73.0.40

Thanks for your time.
11-30-2016 04:41 PM
     Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #2
RE: Speakerphone page (Intercom)
For that large a setup I would look into using Multicast Paging instead of the Asterisk Page function. Multicast will allow the page to be picked up by all phones at almost the same time, and reduces network usage/delays because it only requires a single set of packets to flow rather than having Asterisk duplicate them out to each individual phone.

Yealink has a bunch of info describing how to setup Multicast directly on their phones, it's quite easy to do.
12-01-2016 08:30 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
fraukas
Unregistered

 
Post: #3
RE: Speakerphone page (Intercom)
Cool !
Thanks a lot for the answer !
12-02-2016 06:05 PM
     Quote this message in a reply
Travis_Yealink Offline
Super Moderator
******

Posts: 171
Joined: Mar 2016
Reputation: 1
Post: #4
RE: Speakerphone page (Intercom)
(12-02-2016 06:05 PM)fraukas Wrote:  Cool !
Thanks a lot for the answer !

Jolouis has told you the answer, yes, our multicase paging featrue is much more convenient for your secnario, please download the guide from our official website and refer to page 616:
http://download.support.yealink.com/down...V81_20.pdf

please let me know if anything I can help.

Travis
12-04-2016 08:11 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
fraukas
Unregistered

 
Post: #5
RE: Speakerphone page (Intercom)
In case anyone wondering the autoprovision format, here it is.

Here's the multicast section.
Code:
multicast.codec = PCMU
multicast.listen_address.1.label = Intercom
multicast.listen_address.1.ip_address = 224.0.0.1:10000
multicast.receive_priority.priority = 0
multicast.receive_priority.enable = 0

Here's the DSSKey shortcut placed on the key #3.
Code:
linekey.3.type = 24
linekey.3.line = 0
linekey.3.value = 224.0.0.1:10000
linekey.3.label = Intercom

***Optional***
Here's the part to prevent a page to interrupt an active call.
Code:
features.intercom.allow=1
features.intercom.barge = 0

I just hope I saved some time to people looking for that.
01-19-2017 12:21 AM
     Quote this message in a reply
Philip954 Offline
Junior Member
**

Posts: 4
Joined: Mar 2017
Reputation: 0
Post: #6
RE: Speakerphone page (Intercom)
(12-04-2016 08:11 AM)Travis Wrote:  
(12-02-2016 06:05 PM)fraukas Wrote:  Cool !
Thanks a lot for the answer !

Jolouis has told you the answer, yes, our multicase paging featrue is much more convenient for your secnario, please download the guide from our official website and refer to page 616:
http://download.support.yealink.com/down...V81_20.pdf

please let me know if anything I can help.

Travis

Hi Travis,

I am trying to set up the multicast on our T41P phones and I am having some trouble. I have followed the steps in the guide but when I try to use the feature I get a called failed or nothing. Not sure what to do.
03-13-2017 01:22 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Travis_Yealink Offline
Super Moderator
******

Posts: 171
Joined: Mar 2016
Reputation: 1
Post: #7
RE: Speakerphone page (Intercom)
(03-13-2017 01:22 PM)Philip954 Wrote:  
(12-04-2016 08:11 AM)Travis Wrote:  
(12-02-2016 06:05 PM)fraukas Wrote:  Cool !
Thanks a lot for the answer !

Jolouis has told you the answer, yes, our multicase paging featrue is much more convenient for your secnario, please download the guide from our official website and refer to page 616:
http://download.support.yealink.com/down...V81_20.pdf

please let me know if anything I can help.

Travis

Hi Travis,

I am trying to set up the multicast on our T41P phones and I am having some trouble. I have followed the steps in the guide but when I try to use the feature I get a called failed or nothing. Not sure what to do.

Hi,

Suggest you send an email to support@yealink.com, and kindly provide the trace files to us, pls provide as least THREE package, and identify each of them, for how to collect trace files, please follow below FAQ:
http://support.yealink.com/faq/faqInfo?id=311

Regards,
Travis
03-15-2017 09:16 AM
Find all posts by this user    like1    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  t46g: intercom over speaker rather than headset? asinshesq 23 56,238 07-28-2021 11:04 PM
Last Post: russman
  How to increase Intercom tone volume? jasonsomers 4 12,946 01-03-2018 06:13 AM
Last Post: Sbo
  How to use the Intercom feature on a T41P Jderek01 1 10,223 09-19-2016 05:44 PM
Last Post: Kevin_Yealink
  EXP40 Page confusion plewis@bcradesign.com 6 9,236 11-27-2015 06:57 PM
Last Post: eth0
  W52P Intercom RPB ext? steve.ot 1 5,479 12-15-2014 04:14 PM
Last Post: James_Yealink
  t46 disconnects phone call when it receives a page. jasit 2 7,758 08-20-2014 01:53 AM
Last Post: blendedtech
  T46g EXP40 - BLF not updating after intercom blistovmhz 13 30,091 07-19-2014 11:27 AM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication