[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T41/2 backlight setting ignored on v81 firmware
Author Message
rpenrod Offline
Junior Member
**

Posts: 9
Joined: Aug 2015
Reputation: 0
Post: #1
Wink T41/2 backlight setting ignored on v81 firmware
On this new v81 firmware, for both the T41 and T42, the backlight value set via provisioning is essentially ignored by the phone.

If the config is phone_setting.backlight_time = 0, the value for "Backlight Time" is set to Always Off, as well as is if phone_setting.backlight_time = 1, the value for "Backlight Time" is also set to Always Off.

This is definitely a bug and needs to be addressed.

We utilize Metaswitch to provision these phones, and the provisioning server sets the following value:

phone_setting.active_backlight_level = 8
phone_setting.inactive_backlight_level = 1
phone_setting.backlight_time = 0


Yet, the phone config (via Web GUI) shows the attached.


Please advise and address ASAP, we had to roll back to v80 firmware as a result.


Attached File(s) Thumbnail(s)
   
(This post was last modified: 11-23-2016 02:14 AM by rpenrod.)
11-23-2016 02:14 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Fraukas2 Offline
Kolibri Telecommunication
**

Posts: 38
Joined: Jan 2017
Reputation: 0
Post: #2
RE: T41/2 backlight setting ignored on v81 firmware
They got removed from the support's site, but which version of the 81 firmware you have.
Are you on XX.81.0.25 ?
Or you are on the XX.81.0.20 ?
01-30-2017 07:49 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
rpenrod Offline
Junior Member
**

Posts: 9
Joined: Aug 2015
Reputation: 0
Post: #3
RE: T41/2 backlight setting ignored on v81 firmware
(01-30-2017 07:49 PM)François1 Wrote:  They got removed from the support's site, but which version of the 81 firmware you have.
Are you on XX.81.0.25 ?
Or you are on the XX.81.0.20 ?

We are now on XX.81.0.25 and the backlight issue has been resolved.
02-23-2017 04:47 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  newest firmware for T4XS units causes bootup loop davedogmoore@gmail.com 0 511 01-21-2024 03:44 PM
Last Post: davedogmoore@gmail.com
  SIP-T46G Need firmware update instructions RobbyK 2 974 01-11-2024 10:52 PM
Last Post: RobbyK
  Firmware T42s Raimundo 1 1,344 11-23-2023 06:45 PM
Last Post: Darsh
  T41S FIRMWARE 66.9.0.80 vers 66.86.0.5 DANJEAN 1 1,806 08-23-2023 01:00 AM
Last Post: complex1
  Yealink SIP-T40P Firmware UnitedTech_Support 1 2,010 05-05-2023 08:07 PM
Last Post: complex1
  T48U Custom Firmware Upgrade to Official Friendly 0 1,930 03-29-2023 01:20 AM
Last Post: Friendly
  Yealink T41S firmware kosif 0 1,948 12-19-2022 08:52 AM
Last Post: kosif
  T42S unable to update firmware brianstoiber 6 7,766 09-30-2022 05:31 PM
Last Post: complex1
  Yealink T48s Firmware update failed dangmoss 2 7,395 02-19-2022 03:09 AM
Last Post: dangmoss
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 6,481 01-14-2022 10:22 AM
Last Post: kumagera

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication