[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T19 / T19P call disconnection with Matrix Eternity
Author Message
fernando.lagper Offline
Junior Member
**

Posts: 11
Joined: Feb 2014
Reputation: 0
Post: #1
Exclamation T19 / T19P call disconnection with Matrix Eternity
Hello.

Good day to you.

A few of my partners are complaining lately from sudden call disconnections on their yealink phones with our Matrix Eternity IPPBX family (it doesn't matter which Eternity firmware version). It happens around 2m55s in the conversation.

I have taken a debug and a pcap files and I have found that the phone itself
is sending a "CANCEL" request to the PBX as per the PCAP file attached
in the middle of the conversation, without any prior PBX request.

I see in the debug trace the following message just before the "cancel" packet.
"release_aborted_calls remove a dialog for an unfinished transaction".

I do not know what causes this message or this behavior.
Can you help me to fix this?.

T19P firmware: 31.71.0.39


Attached File(s)
.pcap  31.71.0.39_7_23_59.pcap (Size: 388.07 KB / Downloads: 3)
.tar  syslog.tar (Size: 234.5 KB / Downloads: 4)
.bin  config.bin (Size: 133 KB / Downloads: 3)
(This post was last modified: 06-25-2015 03:31 PM by fernando.lagper.)
06-25-2015 03:28 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Flora_Yealink Offline
Senior Member
****

Posts: 265
Joined: Oct 2012
Reputation: 2
Post: #2
RE: T19 / T19P call disconnection with Matrix Eternity
Hi,
For the issue, would you please upgrade to the latest version to see if the issue still exist? if yes, please let us know .
http://support.yealink.com/attachmentDow...2.0.75.zip

and how many phones the customer have ? all have the same issue ?
how often the issue happen , every call?
Best Regards!
Flora
06-25-2015 10:19 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
fernando.lagper Offline
Junior Member
**

Posts: 11
Joined: Feb 2014
Reputation: 0
Post: #3
RE: T19 / T19P call disconnection with Matrix Eternity
Hi Flora.

I will provide your update to our customer and be back at you.

Both customers have around 8~12 telephones each,
mixed between T18, T19 and even some T26.

I have one T19 here in my office for testing and I do not suffer such disconnects.
I will check again all the relevant timers in the PBX.

Thanks.
06-25-2015 11:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
fernando.lagper Offline
Junior Member
**

Posts: 11
Joined: Feb 2014
Reputation: 0
Post: #4
RE: T19 / T19P call disconnection with Matrix Eternity
One of the partners has already confirmed me that upgrading the phone to the latest version 31.72.0.75 makes no difference.
My other customer is pending to confirm.
(This post was last modified: 06-26-2015 02:41 PM by fernando.lagper.)
06-26-2015 02:40 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Flora_Yealink Offline
Senior Member
****

Posts: 265
Joined: Oct 2012
Reputation: 2
Post: #5
RE: T19 / T19P call disconnection with Matrix Eternity
Thanks, I will submit the issue to the engineer and will let you know if any question.
Best Regards!
Flora
06-26-2015 10:34 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
fernando.lagper Offline
Junior Member
**

Posts: 11
Joined: Feb 2014
Reputation: 0
Post: #6
RE: T19 / T19P call disconnection with Matrix Eternity
In the mean time, i took a better PCAP.
Find it attached.

The dialed number whose call was disconnected is "625******9" (censored for spam prevention).
It's the last call to this number the one that disconnected itself, the other try was a misdial.


Attached File(s)
.pcap  trace.pcap (Size: 235.5 KB / Downloads: 0)
(This post was last modified: 06-29-2015 05:16 PM by fernando.lagper.)
06-29-2015 04:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Flora_Yealink Offline
Senior Member
****

Posts: 265
Joined: Oct 2012
Reputation: 2
Post: #7
RE: T19 / T19P call disconnection with Matrix Eternity
Hi ,
After the engineer check , the phone dial out and receive the 183 message but the phone hasn't receive 200Ok message in 3 minutes, so the phone will end the call automatically.
Would you please help check why the server won't send the 200 OK message to the phone ?
Best Regards!
Flora
06-30-2015 07:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP50 won't initiate a call on a Mac (Big Sur) computer? microdaft 2 3,975 05-31-2022 01:54 AM
Last Post: Christianpoulton
  MP56 - MS Teams Call Queue name not showing grahamhosking 0 860 04-19-2022 09:54 PM
Last Post: grahamhosking
Brick MP50 stuck after call transfer af@benenden.school 4 4,710 12-22-2021 07:24 PM
Last Post: af@benenden.school
  Cannot disable audible Park notifications during active call livehappy42 3 3,088 11-13-2021 09:11 AM
Last Post: livehappy42
  T57W Call Park Alert bcramer 1 3,684 10-29-2021 05:33 AM
Last Post: livehappy42
Sad T22P No Sound on Call Pick Up oaltinsoy853 1 2,864 10-19-2021 07:22 PM
Last Post: complex1
  T58 Call Park and Transfer Problems user42491 1 3,154 08-03-2021 09:24 PM
Last Post: complex1
  T58A SCA Shared Call Appearance with Call Manager cm_y 1 5,328 11-15-2019 09:42 AM
Last Post: Jacky_Yealink
  T29G can't hang up call unless end call is pressed Bizfon 1 5,893 11-14-2019 07:51 AM
Last Post: Paz_Yealink
  BLF and Call Park on T29G pureit 0 4,212 04-02-2019 01:36 AM
Last Post: pureit

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication