[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Incorrect File Format error on call send, receive or end call
Author Message
morrism Offline
Junior Member
**

Posts: 4
Joined: Jun 2015
Reputation: 0
Post: #1
Incorrect File Format error on call send, receive or end call
We have 50 yealink SIP-T32G phones here. Never any problems when manually configured.
The two most recent phones we had provisioned automatically through the boot server, something which we had not done in the past. The phones work for making and receiving calls, but both phones have a very strange error.

"Incorrect File Format" is displayed on screen every time a call is sent, received, or ended. It displays the error on the screen for a few seconds then disappears. The exact same error happens on both autoprovisioned phones.


Version

Firmware Version 32.70.1.33
Hardware Version 22.3.2.32.0.0.0


Ive tried factory resetting the phone, and tried four different versions of firmware including the latest one. It is important I'm able to autoprovision these phones.
06-18-2015 06:46 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Elaine_Yealink Offline
Super Moderator
******

Posts: 152
Joined: Aug 2014
Reputation: 4
Post: #2
RE: Incorrect File Format error on call send, receive or end call
Dear,
Would you please send our auto provision template to support@yealink.com so that our engineer could have a local test?

Thanks and regards
Elaine
06-18-2015 09:05 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
morrism Offline
Junior Member
**

Posts: 4
Joined: Jun 2015
Reputation: 0
Post: #3
RE: Incorrect File Format error on call send, receive or end call
(06-18-2015 09:05 AM)Yealink_Elaine Wrote:  Dear,
Would you please send our auto provision template to support@yealink.com so that our engineer could have a local test?

Thanks and regards
Elaine

Are there instructions on setting up own boot server?
06-19-2015 01:48 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Elaine_Yealink Offline
Super Moderator
******

Posts: 152
Joined: Aug 2014
Reputation: 4
Post: #4
RE: Incorrect File Format error on call send, receive or end call
Hi Morrism,
If the boot server here means the ftp/tftp/http/https server that used for auto provision, please refer to Auto Provision Guide below:

http://www.yealink.com/Upload/Features/Y...g_70.0.zip

Still, will appreciate that you can send us the cfg file and config.bin for testing.

Regards
Elaine
06-19-2015 08:58 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
morrism Offline
Junior Member
**

Posts: 4
Joined: Jun 2015
Reputation: 0
Post: #5
RE: Incorrect File Format error on call send, receive or end call
The error was in returning an incorrectly formatted string to the phone. If you are having this problem, make sure the phone is not getting returned garbage after sending an actionURL
10-06-2015 07:37 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  How to disable Voicemail from .cfg in auto provisioning file? boniakowski 2 1,508 09-19-2023 12:03 AM
Last Post: boniakowski
  RPS API - Authentication Error jrmende5 5 13,185 11-26-2020 04:53 PM
Last Post: wecloudit
  One CFG file for one phone xbow 1 5,435 08-21-2020 05:00 AM
Last Post: xbow
  Is it possible to set auto_provision.server.url via a servlet call? scully 2 7,619 05-01-2020 01:53 PM
Last Post: richardoux
  See CALL ID REMOTE PHONEBOOK synapserm76 1 6,040 08-11-2019 03:38 PM
Last Post: complex1
  How to erase a parameter using autoprovision file Santi 1 6,827 06-21-2019 10:25 AM
Last Post: complex1
  Can't Call Forward Yealink T21P e2 - latest firmware Grace6641 1 7,254 06-18-2019 09:53 AM
Last Post: Walter_Yealink
  Ni file name in POST URLs [Was: How exactly are -local.cfg files POSTed to server ?] oliv 8 20,587 11-09-2018 01:58 PM
Last Post: jolouis
  Autoprovisionong T4xS v83 error gasper_s 2 6,896 11-05-2018 10:25 AM
Last Post: gasper_s
  Auto provisioning file names shane.caznet 1 8,664 10-12-2018 02:56 PM
Last Post: jolouis

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication