[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W52P auto provision
Author Message
ECN Offline
Junior Member
**

Posts: 3
Joined: May 2015
Reputation: 1
Post: #1
W52P auto provision
Hi,

I'm using the W52P cordless phone with option 66 pointing to the host-name of an internal TFTP server. The W52P is able to download its common configuration file but fails to download the mac.cfg file. The phones logs indicate the following error:

Quote:Jun 13 03:26:57 LIBD[345]: TFTP<5+notice> tftp open begin, host: -host name removed-, port:69, remote_name:001565858fe9.cfg
Jun 13 03:26:57 LIBD[345]: TFTP<6+info > Send Request Packet
Jun 13 03:26:57 LIBD[345]: TFTP<5+notice> tftp open success
Jun 13 03:27:02 LIBD[345]: TFTP<3+error > Error Select! errno 0
Jun 13 03:27:02 ATP [345]: ATP <3+error > tftp to file failed, code = -8, msg = Read Error, retry = 3
Jun 13 03:27:02 ATP [345]: ATP <4+warnin> Download mac.cfg fail
Jun 13 03:27:02 ATP [345]: ATP <6+info > send end provision!!

I've tried renaming the mac.cfg file that is currently on my tftp server to match what the phone is looking for - 001565858fe9.cfg - but this hasn't resolved the issue. I've stripped the config in the mac.cfg file to the bare basics in an attempt to make troubleshooting easier:

Quote:#!version:1.0.0.1

##File header "#!version:1.0.0.1" can not be edited or deleted.##

################################################################################​#######
## Account1 Settings ##
################################################################################​#######

#Enable or disable the account 1; 0-Disabled (default), 1-Enabled;
account.1.enable = 1

#Configure the label displayed on the LCD screen for account 1.
account.1.label = 101

#Configure the display name of account 1.
account.1.display_name = 101

#Configure the username and password for register authentication.
account.1.auth_name = 101
account.1.password = -removed-

#Configure the register user name.
account.1.user_name = 101

#Configure the SIP server address.
account.1.sip_server_host = -removed-

#Specify the IP address or domain name of the outbound proxy server.
account.1.outbound_host = -removed-

#Specify the port for the SIP server. The default value is 5060.
account.1.sip_server_port = 5060

#Specify the server port, the default value is 5060.
account.1.outbound_port = 5060

#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
{if $sip_transport_1 == 'udp'}account.1.transport = 0{/if}
{if $sip_transport_1 == 'tcp'}account.1.transport = 1{/if}
{if $sip_transport_1 == 'tls'}account.1.transport = 2{/if}
{if $sip_transport_1 == 'dns srv'}account.1.transport = 3{/if}

#Configure the SIP port for account 1, the default value is 5060.
account.1.sip_listen_port = 5060

#Configure the register expiry time (in seconds), the default value is 3600.
account.1.expires = 3600

#Configure the RTP packet time. The valid values are 0 (Disabled), 10, 20 (default), 30, 40, 50, 60.
account.1.ptime = 20

The handset and base station are using out of the box firmware. Absolutely no upgrades have been done at this point in time to either.


My question here is why does the W52P fail to download the mac.cfg file?
06-13-2015 12:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ECN Offline
Junior Member
**

Posts: 3
Joined: May 2015
Reputation: 1
Post: #2
RE: W52P auto provision
A more specific question;

I'm trying to download the mac.cfg file via http. The path is specified via the common configuration file with the following line:

#Configure the URL of the auto provisioning server.
auto_provision.server.url = http://host-name/file-location

is anyone able to confirm if they've had success downloading the mac.cfg file using this line in the common configuration file using http?
06-16-2015 02:18 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Elaine_Yealink Offline
Super Moderator
******

Posts: 152
Joined: Aug 2014
Reputation: 4
Post: #3
RE: W52P auto provision
Hi Sean,

Please pay attention to my email feedback. Just in case, please pay attention to the FAQ attached.

Regards
Elaine


Attached File(s)
.docx  Auto Provision Twice in Chain .docx (Size: 25.53 KB / Downloads: 48)
06-16-2015 05:34 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ECN Offline
Junior Member
**

Posts: 3
Joined: May 2015
Reputation: 1
Post: #4
RE: W52P auto provision
Hi Elaine,

Thank you VERY much, this is exactly what I was looking for. The mac.cfg file now downloads using HTTP as I would like it to. Please pass on my sincere thanks to the support team.

kind regards,
ECN
06-17-2015 01:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Auto Provision Wall Paper Stopped Working TRP Tech 5 8,825 02-19-2024 12:02 AM
Last Post: jamesalan
Smile W73P dect phone not allowing to auto-provision as different extension Andi_Dee 2 944 02-05-2024 12:49 PM
Last Post: bekean
  W52P handset language mkeuter 2 7,135 01-04-2024 08:52 PM
Last Post: bartas
  How to disable Voicemail from .cfg in auto provisioning file? boniakowski 2 1,160 09-19-2023 12:03 AM
Last Post: boniakowski
  VPN Changes Do Not Get Auto-Provisioned joe1st 3 2,487 08-08-2023 12:35 AM
Last Post: cecilberge
Wink Auto Provsioning EOL products and devices that do dont have recent firmware releases GalacticSolutions 3 5,475 04-12-2023 05:32 PM
Last Post: aaronmedina
  Yealink T54W Auto Provision not working h.cmc 1 3,345 12-09-2022 08:31 PM
Last Post: complex1
  Need help auto provisioning a phone with Nextiva service. LittleDogTech 3 4,557 08-30-2022 06:28 PM
Last Post: complex1
  Auto provision username and password kbrownlees 7 22,311 08-23-2022 11:16 PM
Last Post: mbole
Question "Trusted Certificates" and auto provisioning jobst 3 5,810 06-15-2022 11:00 AM
Last Post: dbonnell

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication